Objectif
The development of a dot printing technology, considering the very high quality obtainable on all kinds of paper and the relatively low cost of the printing mechanism, could constitute a good solution for producing hard copy from typewriters and high-quality printers attached to personal computers. Dot printing systems could have widespread use in workstations, word processors, high and low end typewriters and printers.
Electrothermal ribbon (ETR) is a dot type printing system without impact (and therefore silent), able to print in both alphanumeric and graphic mode at high resolution, and with excellent quality on every kind of paper.
It is thermal printing technology using solid ink deposited on a ribbon, softened by heat and then transferred to the paper. It can be considered as a development of conventional thermal systems.
Some new ideas concern the development of a completely different system for the deposition of the metallic layer, used as a return current path in the ribbon. The use of a base layer with a completely different structure is also investigated.
A different printhead is being developed to take into account the requirements for higher printing speed, such as resistance to wear and thermal dissipation. The last step will be the development of a prototype using a ribbon without the presently used metallic layer. In this case, the printhead may also have to be completely redesigned.
Although the technical results were achieved, the project was terminated prematurely due to the emergence on the marketplace of black and white and colour printers based on cheaper technologies (mainly laser and ink bubble jet).
ETR is a dot-type printing system without impact (and therefore silent), able to print in both alphanumeric and graphic mode at very high resolution, and with excellent quality on every kind of paper. It is a thermal printing technology, using solid ink deposited on a ribbon, softened by heat and then transferred to the paper. It can be considered as a development of conventional thermal systems.
As a first step, in order to fully exploit the potential of this technology, the project addressed every key element both from the theoretical and practical point of view. This enabled the consortium to reach the most up-to-date level in the present technology and to increase its know-how for further improvements. New ideas included the development of a completely different system for the deposition of the metallic layer, used as a return current path in the ribbon. The use of a base layer with a completely different structure was also investigated.
At the same time a different printhead was developed to take into account the requirements for higher printing speed, such as resistance to wear and thermal dissipation. The last step was to be the development of a prototype using a ribbon without the presently used metallic layer.
The project also planned to investigate other new ideas and to implement known technological processes (such as direct current magnetron sputtering of thin metallic layers on polymeric substrates) not yet used in thermal ribbon production.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie ingénierie des materiaux couleurs
- sciences naturelles sciences physiques optique physique des lasers
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Données non disponibles
Coordinateur
10040 Leini Torino
Italie
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.