Obiettivo
The development of a dot printing technology, considering the very high quality obtainable on all kinds of paper and the relatively low cost of the printing mechanism, could constitute a good solution for producing hard copy from typewriters and high-quality printers attached to personal computers. Dot printing systems could have widespread use in workstations, word processors, high and low end typewriters and printers.
Electrothermal ribbon (ETR) is a dot type printing system without impact (and therefore silent), able to print in both alphanumeric and graphic mode at high resolution, and with excellent quality on every kind of paper.
It is thermal printing technology using solid ink deposited on a ribbon, softened by heat and then transferred to the paper. It can be considered as a development of conventional thermal systems.
Some new ideas concern the development of a completely different system for the deposition of the metallic layer, used as a return current path in the ribbon. The use of a base layer with a completely different structure is also investigated.
A different printhead is being developed to take into account the requirements for higher printing speed, such as resistance to wear and thermal dissipation. The last step will be the development of a prototype using a ribbon without the presently used metallic layer. In this case, the printhead may also have to be completely redesigned.
Although the technical results were achieved, the project was terminated prematurely due to the emergence on the marketplace of black and white and colour printers based on cheaper technologies (mainly laser and ink bubble jet).
ETR is a dot-type printing system without impact (and therefore silent), able to print in both alphanumeric and graphic mode at very high resolution, and with excellent quality on every kind of paper. It is a thermal printing technology, using solid ink deposited on a ribbon, softened by heat and then transferred to the paper. It can be considered as a development of conventional thermal systems.
As a first step, in order to fully exploit the potential of this technology, the project addressed every key element both from the theoretical and practical point of view. This enabled the consortium to reach the most up-to-date level in the present technology and to increase its know-how for further improvements. New ideas included the development of a completely different system for the deposition of the metallic layer, used as a return current path in the ribbon. The use of a base layer with a completely different structure was also investigated.
At the same time a different printhead was developed to take into account the requirements for higher printing speed, such as resistance to wear and thermal dissipation. The last step was to be the development of a prototype using a ribbon without the presently used metallic layer.
The project also planned to investigate other new ideas and to implement known technological processes (such as direct current magnetron sputtering of thin metallic layers on polymeric substrates) not yet used in thermal ribbon production.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria dei materiali colori
- scienze naturali scienze fisiche ottica fisica dei laser
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Dati non disponibili
Coordinatore
10040 Leini Torino
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.