European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-18

Carbon Nanotube Confinement Strategies to Develop Novel Polymer Matrix Composites

Objetivo

Light composite materials for load bearing applications can be made using different type reinforcements and polymer matrices. Carbon nanotubes (CNT) have been studied extensively because of their exceptional mechanical and electrical properties, yet their practical and extensive use in commercial materials is missing. The utilization of CNTs as reinforcement to design novel composites is a quite old idea. However, there is a lack of a knowledge based approach to achieve the nanostructuration level required to optimize the CNT/polymer composite performances. The main objective of POCO is to get innovative polymer composites filled with CNT in order to obtain nanostructured materials with tailor made properties. The CNT/polymer interface is, together with the CNT and the polymer, the third and most important element that will determine the final properties. Hence the chemical functionalization of CNT surfaces is of utter importance to achieve not only a proper dispersion and anchorage of the nanotubes into the polymer matrix during processing, but also to optimize the performance itself in solid state. Our approach involves the development of different CNT confinement strategies to develop novel polymer matrix nanocomposites. Several polymers have been selected as representative of thermosetting and thermoplastic materials. This ensures that the output of POCO could be applied in a wide range of applications: automotive, aeronautics, building, aerospace, wind power generation (blades), ship building, biomedicine…This project will be focused on four fundamental properties: (i) high strength for structural and mechanical components, (ii) tuneable electrical properties, (iii) low wear under fretting (low amplitude reciprocating movement) and (iv) superhydrophobicity. Multifunctionality of these materials will be an important benefit as the requirements for composite polymeric materials are quite diverse

Convocatoria de propuestas

FP7-NMP-2007-LARGE-1
Consulte otros proyectos de esta convocatoria

Coordinador

FUNDACION TEKNIKER
Aportación de la UE
€ 489 699,70
Dirección
CALLE INAKI GOENAGA 5
20600 Eibar Guipuzcoa
España

Ver en el mapa

Región
Noreste País Vasco Gipuzkoa
Tipo de actividad
Research Organisations
Contacto administrativo
Borja Coto (Mr.)
Enlaces
Coste total
Sin datos

Participantes (16)