Objetivo
The objective of this project was the development of a multichamber batch reactor in which interpoly silicon oxide and silicon nitride films, combined in a so-called ONO configuration, can be produced in one reactor system.
The objective of this project is the development of a multichamber batch reator in which interpoly silicon oxide and silicon nitride films, combined in a so-called oxynitride oxide (ONO) configuration, can be produced in one reactor system.
The construction of a Mark 1 prototype and its installationm were accomplished by the end of 1990. Etching rates and surface concentrations (by X-ray photoelectron spectroscopy (XPS) and wettability) have been investigated under a wide variety of process conditions to assess process uniformity on the same wafer and from wafer to wafer on complete batches, as well as to evaluate run to run reproducibility. The objective of establishing a process whereby native oxide is removed over a batch of 25 wafers without significant etching of other oxides on the wafers has been achieved. It has also been shown that the oxygen content can be reduced to a fraction of a monolayer and the surface is well passivated against reoxidation. In addition metallic contamination studies have revealed no increase of copper, nickel or iron on wafers run in the high frequency (HF) vapour reactor as compared to control wafers.
Electrical tests on capacitors fabricated with the Mark 1 oxide as dielectric have repeatedly demonstrated that, compared to conventional wet etching techniques, the in situ HF vapour preetch of the native oxide prior to its bottom dry oxidation process does provide superior vertical characteristics of the bottom oxide. Equally important for advanced ONO deposition, where further shrinkage of the dielectric's thickness is required, is the control and optimization of the nitride film deposition process. For this, the Mark 1 prototype has demonstrated its excellent capabilities. For the first time it has been possible to study the nitride deposition kinetics on clean (ie native oxide free) silicon surfaces. For the ONO application, in particular, it has been concluded that: the novel nitride process developed in the Mark 1 system prod uces films that are already continuous below 30 augstrom and that compared to conventional processing, the clustered oxide nitride (ON) process in Mark 1 provides better control.
To demonstrate the superior electrical characteristics of ONO films grown in such a reactor, state of the art erasable programmable read only memory (EPROM) and electrically erasable programmable read only memory (EEPROM) structures with a dielectric stack in the range of 20-30 nm are being manufactured and tested. For purposes of comparison electrical evaluation of different ONO recipes has been performed using a dedicated test pattern for 4 Mbit EPROM, in order to find the best interpoly dielectric characteristics which can be obtained in conventional furnaces.
A prototype was made available on 24/12/92
In state-of-the-art devices, interpoly ONO films are implemented in the floating gate structure of EPROM and EEPROM devices. Following the development of higher circuit integration and the corresponding reduction in dielectrics thickness, it appears that the integrity of the interfaces between the various layers will soon become the limiting factor in the electrical performance (electrical defect density, charge retention) of future devices. It is thus important that the dielectric structure is deposited in a single vacuum system, preventing the wafers from coming into contact with air, before the capacitive structure is completed. In the latter case, in fact, the resulting uncontrolled growth of native oxide films combined with the exposure of the surfaces to chemical contaminants would lead to the degradation of the interface quality in an unreproducible way, adversely affecting the electrical characteristics of the devices.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias químicas electroquímica electrólisis
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ciencias naturales ciencias químicas química inorgánica metaloides
- ciencias naturales ciencias físicas óptica espectroscopia
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Datos no disponibles
Coordinador
3723 BJ BILTHOVEN
Países Bajos
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.