Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-18

Printable, organic and large-area realisation of integrated circuits

Descripción del proyecto


Flexible, organic and large area electronics

The objective of the project is to realise high-performance organic electronic devices and circuits using large-area processing compatible fabrication methods. The high performance of the organic circuits referred to here means high speed (kHz-MHz range), low parasitic capacitance, low operating voltage, and low power consumption. The related organic thin film transistor (OTFT) fabrication development will be focused to enable a high resolution nanoimprinting lithography (NIL) step, which is compatible with roll-to-roll processing environment. Applying NIL will enable smaller transistor channel lengths (down below 1 µm) and thereby an increase in the speed of the device. Another important concept to improve the performance is the self-aligned fabrication principle, in which the critical patterns of the different OTFT layers are automatically aligned in respect to each other during the fabrication. This decreases the parasitic capacitances and thereby increases the speed of the device, and is one of the key elements to enable the use of large-area fabrication techniques such as printing. Also complementary transistor technology will be developed, which will enable a decrease in operating voltage and power consumption. The high performance organic transistors will be tested in basic electronic building blocks such as inverters and ring oscillators. The technology development will be exploited in the active matrix liquid crystal display (AMLCD) and radio-frequency identification (RFID) demonstrators. In addition to showing that sufficient performance can be reached without sacrificing the mass fabrication approach, solutions for the fabrication of roll-to-roll tools in order to make serial replication viable will be provided. Finally, the design, characterization, and modeling of submicron low-power OTFTs will be done in order to support the fabrication of the demonstrators based on the technology developed in the project.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

FP7-ICT-2009-4
Consulte otros proyectos de esta convocatoria

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

CP - Collaborative project (generic)

Coordinador

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Aportación de la UE
€ 0,00
Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (16)

Mi folleto 0 0