Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-18

Printable, organic and large-area realisation of integrated circuits

Description du projet


Flexible, organic and large area electronics

The objective of the project is to realise high-performance organic electronic devices and circuits using large-area processing compatible fabrication methods. The high performance of the organic circuits referred to here means high speed (kHz-MHz range), low parasitic capacitance, low operating voltage, and low power consumption. The related organic thin film transistor (OTFT) fabrication development will be focused to enable a high resolution nanoimprinting lithography (NIL) step, which is compatible with roll-to-roll processing environment. Applying NIL will enable smaller transistor channel lengths (down below 1 µm) and thereby an increase in the speed of the device. Another important concept to improve the performance is the self-aligned fabrication principle, in which the critical patterns of the different OTFT layers are automatically aligned in respect to each other during the fabrication. This decreases the parasitic capacitances and thereby increases the speed of the device, and is one of the key elements to enable the use of large-area fabrication techniques such as printing. Also complementary transistor technology will be developed, which will enable a decrease in operating voltage and power consumption. The high performance organic transistors will be tested in basic electronic building blocks such as inverters and ring oscillators. The technology development will be exploited in the active matrix liquid crystal display (AMLCD) and radio-frequency identification (RFID) demonstrators. In addition to showing that sufficient performance can be reached without sacrificing the mass fabrication approach, solutions for the fabrication of roll-to-roll tools in order to make serial replication viable will be provided. Finally, the design, characterization, and modeling of submicron low-power OTFTs will be done in order to support the fabrication of the demonstrators based on the technology developed in the project.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

FP7-ICT-2009-4
Voir d’autres projets de cet appel

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

CP - Collaborative project (generic)

Coordinateur

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Contribution de l’UE
€ 0,00
Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (16)

Mon livret 0 0