Objective
SOMABAT aims to develop more environmental friendly, safer and better performing high power Li polymer battery by the development of novel breakthrough recyclable solid materials to be used as anode, cathode and solid polymer electrolyte, new alternatives to recycle the different components of the battery and cycle life analysis.
This challenge will be achieved by using new low-cost synthesis and processing methods in which it is possible to tailor the different properties of the materials. Development of different novel synthetic and recyclable materials based carbon based hybrid materials, novel LiFePO4 and LiFeMnPO4 based nanocomposite cathode with a conductive polymers or carbons, and highly conductive electrolyte membranes with porous architecture based on fluorinated matrices with nanosized particles and others based on a series of polyphosphates and polyphosphonates polymers will respond to the very ambitious challenge of adequate energy density, lifetime and safety.
An assessment and test of the potential recyclability and revalorisation of the battery components developed and life cycle assessment of the cell will allow the development of a more environmental friendly Li polymer battery in which a 50 % weight of the battery will be recyclable and a reduction of the final cost of the battery up to 150 €/KWh.
The consortium has made up with experts in the field and complementary in terms of R&D expertise and geographic distribution.
Fields of science
Programme(s)
Call for proposal
FP7-2010-GC-ELECTROCHEMICAL-STORAGE
See other projects for this call
Funding Scheme
CP - Collaborative project (generic)Coordinator
46022 Paterna
Spain
See on map
Participants (12)
4000 Liege
See on map
8010 Graz
See on map
01011 Kyiv
See on map
300223 Timisoara
See on map
8190 Kopstal
See on map
28006 Madrid
See on map
38420 DOMENE
See on map
47809 Krefeld
See on map
2765 Smorum
See on map
01013 VITORIA
See on map
1000 Bruxelles / Brussel
See on map
28037 Madrid
See on map