Skip to main content

Development of an optimized large scale engine CFRP annulus filler

Objectif

This proposal describes the effort planned by the partners FACC AG, Austria & University of applied sciences (UAS) Rapperswil, Switzerland, for the development of a CFRP annulus filler.
Production process will be an advanced preform concept with folding techniques and integration of all connection parts, injected with resin by an improved RTM process.
Part development will start with material tests on coupons, continued by the manufacturing of a prototype design, and finally ending in a close-to-series-production of 56 annulus filler.
In addition, a quality assurance supervisor accompanies the project from the beginning on in order to establish a quality measurement system suitable for a serial production.
Material- & process development will be led by UAS Rapperswil, while manufacturing, quality assurance and non-destructive testing will be under the responsibility of FACC.
FACC AG is Austria’s first-tier aircraft supplier in composite components, UAS Rapperswil is specialized in RTM process improvements and preform technologies.

Appel à propositions

SP1-JTI-CS-2010-01
Voir d’autres projets de cet appel

Coordinateur

FISCHER ADVANCED COMPOSITE COMPONENTS AG*FACC AG
Adresse
Fischerstrasse
4910 Ried Im Innkreis
Autriche
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contribution de l’UE
€ 348 329
Contact administratif
Konstantin Horejsi (Mr.)

Participants (1)

HSR HOCHSCHULE FUR TECHNIK RAPPERSWIL
Suisse
Contribution de l’UE
€ 224 803
Adresse
Oberseestrasse 10
8640 Rapperswil
Type d’activité
Higher or Secondary Education Establishments
Contact administratif
Markus Henne (Prof.)