Objetivo
The main objective of the LEMCOTEC project will be the improvement of core-engine thermal efficiency by increasing the overall pressure ratio (OPR) to up to 70 leading to a further reduction of CO2. Since NOx increases with OPR, combustion technologies have to be further developed, at the same time, to at least compensate for this effect. The project will attain and exceed the ACARE targets for 2020 and will be going beyond the CO2 reductions to be achieved by on-going FP6 and FP7 programmes including Clean Sky:
1.) CO2: minus 50% per passenger kilometre by 2020, with an engine contribution of 15 to 20%, 2.) NOx: minus 80% by 2020 and 3.) Reduce other emissions: soot, CO, UHC, SOx, particulates.
The major technical subjects to be addressed by the project are:
1.) Innovative compressor for the ultra-high pressure ratio cycle (OPR 70) and associated thermal management technologies, 2.) Combustor-turbine interaction for higher turbine efficiency & ultra-high OPR cycles, 3.) Low NOx combustion systems for ultra-high OPR cycles, 4.) Advanced structures to enable high OPR engines & integration with heat exchangers, 5.) Reduced cooling requirements and stiffer structures for turbo-machinery efficiency, 6.) HP/IP compressor stability control.
The first four subjects will enable the engine industry to extend their design space beyond the overall pressure ratio of 50, which is the practical limit in the latest engines. Rig testing is required to validate the respective designs as well as the simulation tools to be developed. The last two subjects have already been researched on the last two subjects by NEWAC. The technology developed in NEWAC (mainly component and / or breadboard validation in a laboratory environment) will be driven further in LEMCOTEC for UHPR core engines. These technologies will be validated at a higher readiness level of up to TRL 5 (component and / or breadboard validation in a relevant environment) for ultra-high OPR core-engines.
Ámbito científico
Convocatoria de propuestas
FP7-AAT-2011-RTD-1
Consulte otros proyectos de esta convocatoria
Régimen de financiación
CP-IP - Large-scale integrating projectCoordinador
15827 Blankenfelde-Mahlow
Alemania
Ver en el mapa
Participantes (38)
80995 Munchen
Ver en el mapa
La participación finalizó
80995 MUENCHEN
Ver en el mapa
N1 9FX London
Ver en el mapa
75015 Paris
Ver en el mapa
46181 Trollhaettan
Ver en el mapa
La participación finalizó
00187 ROMA
Ver en el mapa
48170 Zamudio-Vizcaya
Ver en el mapa
59512 VELKA BITES
Ver en el mapa
64510 Bordes
Ver en el mapa
35 078 Rzeszow
Ver en el mapa
75008 Paris
Ver en el mapa
546 36 THESSALONIKI
Ver en el mapa
82024 Taufkirchen
Ver en el mapa
CB2 1TN Cambridge
Ver en el mapa
31057 Toulouse Cedex
Ver en el mapa
412 96 GOTEBORG
Ver en el mapa
111116 MOSCOW
Ver en el mapa
75794 Paris
Ver en el mapa
MK43 0AL Cranfield - Bedfordshire
Ver en el mapa
01510 Minano (Alava)
Ver en el mapa
51147 Koln
Ver en el mapa
80686 Munchen
Ver en el mapa
76131 Karlsruhe
Ver en el mapa
LE11 3TU Loughborough
Ver en el mapa
91120 Palaiseau
Ver en el mapa
LN2 2LL LINCOLN
Ver en el mapa
52062 Aachen
Ver en el mapa
38106 Braunschweig
Ver en el mapa
01069 Dresden
Ver en el mapa
28040 Madrid
Ver en el mapa
50121 Florence
Ver en el mapa
OX1 2JD Oxford
Ver en el mapa
70174 Stuttgart
Ver en el mapa
1640 Sint-Genesius-Rode
Ver en el mapa
19000 Praha 18
Ver en el mapa
La participación finalizó
50134 FIRENZE
Ver en el mapa
50127 Firenze
Ver en el mapa
10040 Rivalta Di Torino
Ver en el mapa