Cel
The main objective of the LEMCOTEC project will be the improvement of core-engine thermal efficiency by increasing the overall pressure ratio (OPR) to up to 70 leading to a further reduction of CO2. Since NOx increases with OPR, combustion technologies have to be further developed, at the same time, to at least compensate for this effect. The project will attain and exceed the ACARE targets for 2020 and will be going beyond the CO2 reductions to be achieved by on-going FP6 and FP7 programmes including Clean Sky:
1.) CO2: minus 50% per passenger kilometre by 2020, with an engine contribution of 15 to 20%, 2.) NOx: minus 80% by 2020 and 3.) Reduce other emissions: soot, CO, UHC, SOx, particulates.
The major technical subjects to be addressed by the project are:
1.) Innovative compressor for the ultra-high pressure ratio cycle (OPR 70) and associated thermal management technologies, 2.) Combustor-turbine interaction for higher turbine efficiency & ultra-high OPR cycles, 3.) Low NOx combustion systems for ultra-high OPR cycles, 4.) Advanced structures to enable high OPR engines & integration with heat exchangers, 5.) Reduced cooling requirements and stiffer structures for turbo-machinery efficiency, 6.) HP/IP compressor stability control.
The first four subjects will enable the engine industry to extend their design space beyond the overall pressure ratio of 50, which is the practical limit in the latest engines. Rig testing is required to validate the respective designs as well as the simulation tools to be developed. The last two subjects have already been researched on the last two subjects by NEWAC. The technology developed in NEWAC (mainly component and / or breadboard validation in a laboratory environment) will be driven further in LEMCOTEC for UHPR core engines. These technologies will be validated at a higher readiness level of up to TRL 5 (component and / or breadboard validation in a relevant environment) for ultra-high OPR core-engines.
Dziedzina nauki
Zaproszenie do składania wniosków
FP7-AAT-2011-RTD-1
Zobacz inne projekty w ramach tego zaproszenia
System finansowania
CP-IP - Large-scale integrating projectKoordynator
15827 Blankenfelde-Mahlow
Niemcy
Zobacz na mapie
Uczestnicy (38)
80995 Munchen
Zobacz na mapie
Zakończenie uczestnictwa
80995 MUENCHEN
Zobacz na mapie
N1 9FX London
Zobacz na mapie
75015 Paris
Zobacz na mapie
46181 Trollhaettan
Zobacz na mapie
Zakończenie uczestnictwa
00187 ROMA
Zobacz na mapie
48170 Zamudio-Vizcaya
Zobacz na mapie
59512 VELKA BITES
Zobacz na mapie
64510 Bordes
Zobacz na mapie
35 078 Rzeszow
Zobacz na mapie
75008 Paris
Zobacz na mapie
546 36 THESSALONIKI
Zobacz na mapie
82024 Taufkirchen
Zobacz na mapie
CB2 1TN Cambridge
Zobacz na mapie
31057 Toulouse Cedex
Zobacz na mapie
412 96 GOTEBORG
Zobacz na mapie
111116 MOSCOW
Zobacz na mapie
75794 Paris
Zobacz na mapie
MK43 0AL Cranfield - Bedfordshire
Zobacz na mapie
01510 Minano (Alava)
Zobacz na mapie
51147 Koln
Zobacz na mapie
80686 Munchen
Zobacz na mapie
76131 Karlsruhe
Zobacz na mapie
LE11 3TU Loughborough
Zobacz na mapie
91120 Palaiseau
Zobacz na mapie
LN2 2LL LINCOLN
Zobacz na mapie
52062 Aachen
Zobacz na mapie
38106 Braunschweig
Zobacz na mapie
01069 Dresden
Zobacz na mapie
28040 Madrid
Zobacz na mapie
50121 Florence
Zobacz na mapie
OX1 2JD Oxford
Zobacz na mapie
70174 Stuttgart
Zobacz na mapie
1640 Sint-Genesius-Rode
Zobacz na mapie
19000 Praha 18
Zobacz na mapie
Zakończenie uczestnictwa
50134 FIRENZE
Zobacz na mapie
50127 Firenze
Zobacz na mapie
10040 Rivalta Di Torino
Zobacz na mapie