Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
Content archived on 2024-06-18

System to significantly increase the effective yield of Calcium (and other alloying elements) in the treatment of specialty steels, while reducing impurities in the melt

Objective

Hotwire aims to develop a new, specially coated feed wire and dispensing system that is able to delay initial Ca core exposure from current duration of only 1.5 seconds to ~5 seconds, extend the Ca melt time (once exposed) from <1 second to ~3 seconds, through the application of thin, nano-particle enhanced heat resistant/intumescent coatings. To further increase the yield of the Calcium by enabling a wider dispersion area in the ladle by developing a novel, articulating feed head to allow wire feed across the entire ladle cross-section.

Call for proposal

FP7-SME-2012
See other projects for this call

Coordinator

INJECTION ALLOYS GERMANY GMBH
EU contribution
€ 561 068,00
Address
NEUE WARNSTEDTER STRASSE 13A
06502 THALE OT WEDDERSLEBEN
Germany

See on map

Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Administrative Contact
Christopher Jackson (Mr.)
Links
Total cost
No data

Participants (6)