Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-05-29

Primary recycling of polyolefin-mixed films for high-added value applications in the blow moulding industry

Objectif

At the moment about 1.5 million Tonnes of plastic are being recycled yearly, 75% of which is polyethylene, both low density (LDPE) and high density (HDPE). Recycling of plastic film so far one is of the weakest points in all-recycling schemes. The reason for this failure is that post-consumer plastic film waste is usually a mixture of diverse plastics, specially polyethylene (LDPE, HDPE) and polypropylene (PP), all together comprising 95% of the total film. Although cleaning and separation of the polyolefins (LDPE, HDPE and PP) from the rest is easy using flotation or hydro-cycloning methods, individualisation of LDPE, HDPE and PP is difficult, since their respective densities are very similar while their variable shape do not allow the use of automated, sensor-based methods (such as use of near-infrared detection).

RECFINMIX proposes the Research and Development of a novel separation principle of LDPE, HDPE and PP films, based on the their differences in cristallinity. When heated, the plastic film contracts. Since LDPE has an amorphous area with a higher degree of freedom, it contracts at lower temperatures than both HDPE and PP. Thus, while at an operating temperature of around 100C, shredded LDPE film pieces will curl, equivalent pieces of HDPE and PP will not be altered at least until 120C, remaining therefore in lamellar structure. The change in dynamic shape suffered by the LDPE is enough for an accurate separation using centrifuges, obtaining highly marketable purified LDPE.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

FP6-2004-SME-COOP
Voir d’autres projets de cet appel

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

Cooperative - SMEs-Co-operative research contracts

Coordinateur

L'UREDERRA, FUNDACIÓN PARA EL DESARROLLO TECNOLÓGICO Y SOCIAL
Contribution de l’UE
Aucune donnée
Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (10)

Mon livret 0 0