Skip to main content

Development of an innovative manufacturing process for the in-LINE COAting of pultruded composites

Objectif

COALINE will develop a in-line clean one-stage process, which is free of VOCs and small particles emissions, able to produce properly coated composite pultruded profiles by means of the development of the sensing technology, advanced mould design and microwave aided curing needed to foster an improved composite – coating adhesion with a reduced labor and process cost. COALINE profiles will be joined to other materials by means of a primer type coating, incorporated also in-line, with bonding on-demand properties.
Composites obtained by means of the COALINE technology will be protected with the selected coating, with a minor cost to the non-coated profiles in a fast, automated and smart manufacturing process, fostering the implementation of lightweight materials in applications such as aeronautics, automotive, marine, building, etc. The coating of the profile will provide specific properties to the composites, such as corrosion resistance in aggressive environments, fire resistance for buildings or improved surface properties (brightness, aspect or colour).
COALINE technology will produce coated pultruded composite profiles made out of glass or carbon fibers and polyester, vinylester or epoxy resins. The coating
COALINE aims to address the production of valuable coated pultruded profiles by means of the following innovations:
• A microwave heating system that will reduce the polymerization time and the energy employed to produce the composites.
• New range of modified resins and gel-coats with MW susceptors to improve radiation absorption and achieve a fast curing process.
• An innovative control system to foster the adhesion of the coating to the composite by means of a controlled curing degree in each stage of the process.
• The development of innovative fast curing primers to permit the employment of de-bonding on demand adhesives to foster the adhesion between the composite and other metallic part, the recycling and maintenance of the pultruded structures.

Appel à propositions

FP7-2013-NMP-ICT-FOF(RTD)
Voir d’autres projets de cet appel

Coordinateur

AIMPLAS - ASOCIACION DE INVESTIGACION DE MATERIALES PLASTICOS Y CONEXAS
Adresse
Valencia Parc Technologic Calle Gustave Eiffel 4
46980 Paterna Valencia
Espagne
Type d’activité
Research Organisations
Contribution de l’UE
€ 530 118
Contact administratif
Santiago Gálvez Settier (Mr.)

Participants (12)

MUEGGE GMBH
Allemagne
Contribution de l’UE
€ 238 500
Adresse
Hochstrasse 4-6
64385 Reichelsheim
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Doris Mügge (Ms.)
FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V.
Allemagne
Contribution de l’UE
€ 389 022
Adresse
Hansastrasse 27C
80686 Munchen
Type d’activité
Research Organisations
Contact administratif
Andrea Zeumann (Ms.)
COMPOSITES ARAGON SL
Espagne
Contribution de l’UE
€ 218 905
Adresse
Ctra Cogullada 20 Nave 12 Parque Tecnologico Cogullada
50014 Zaragoza
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Rubén Martín (Mr.)
SYNTHESITES INNOVATIVE TECHNOLOGIESEPE
Greece
Contribution de l’UE
€ 263 600
Adresse
Kyprion Agoniston 33
18541 Peiraias
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Nikos Pantelelis (Dr.)
POLYMEC SL
Espagne
Contribution de l’UE
€ 317 315
Adresse
C/rio Manzanares Parcela B23
30564 Lorqui
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Carmen Sanchez Botella (Ms.)
RIGAS TEHNISKA UNIVERSITATE
Lettonie
Contribution de l’UE
€ 212 100
Adresse
Kalku Iela 1
1658 Riga
Type d’activité
Higher or Secondary Education Establishments
Contact administratif
Evgeny Barkanov (Prof.)
RESOLTECH
France
Contribution de l’UE
€ 201 736
Adresse
Impasse Emeri 35 Pole D Activites
13510 Eguilles
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Pierre Calmon (Mr.)
RESCOLL
France
Contribution de l’UE
€ 376 441
Adresse
Allee Geoffroy Saint Hilaire 8 Cs 30021
33600 Pessac
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Konstantin Sipos (Mr.)
ECOINNOVA TERMOESTABLES SOCIEDAD LIMITADA
Espagne
Contribution de l’UE
€ 248 400
Adresse
Calle Musico Lopez Chavarri Pta 8 6
46003 Valencia
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Fernando Castro (Mr.)
ACCIONA CONSTRUCCION SA
Espagne
Contribution de l’UE
€ 327 180
Adresse
Avenida De Europa 18 Parque Empresarial
28108 Alcobendas
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Miguel Angel Paris Torres (Mr.)
ALKE SRL
Italie
Contribution de l’UE
€ 226 260
Adresse
Via Cile 3-5-7
35127 Padova
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Lamberto Salvan (Mr.)
PULTREX LIMITED

Participation terminée

United Kingdom
Adresse
Old Ipswich Road Apex 12
CO7 7QR Colchester Essex
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Contact administratif
Colin Leek (Mr.)