Skip to main content

Failure analysis and damage mechanisms of newly developed, gamma-prime strengthened Ni - based superalloy

Objective

Reduction of the fuel consumption and emission of NOX and CO2 by jet engines is a priority of the ACARE SRA 2020 objectives. The development of an environmentally friendly aircraft engine (SAGE1) considers using lightweight and efficient turbine components. Within the objectives of open rotor development in SAGE1, activities are underway to develop new technologies for rotating structures. The rotating structure transmits the torque generated by the engine to the propellersand is subjected to the high temperature exhaust gas from the turbine. It is likely that frames will be made as a weld assembly consisting of cast parts in a newly developed y’ strengthened nickel based superalloy. However, it is a challenge to cast these alloys because they were primarily developed in wrought form. Currently, cast versions of low content y’ strengthened Ni alloys are widely investigated however failure analysis and damage mechanisms are not fully explored. Thus the aim of this project is to complex failure analysis of new alloy which is an enabler material for manufacture turbine components exposed at high temperature. In order to conduct a comprehensive investigation of damage mechanism the following objectives have been defined: a) optimizing the casting process parameters and heat treatment of alloy for a range of microstructures, b) experimental studies of mechanical behavior of newly developed alloy with different grain size under different loading and temperature regimes during monotonous and fatigue tests, c) determination and characterisation of damage mechanisms by advanced microstructural characterisation techniques. The consortium consists of technical university (WUT) and two certified, modern research centres equipped with unique devices providing high quality testing services, which offer new solutions to contemporary aviation (IoA and KIMAB). Such a structured consortium will provide complex expertise abilities of basic research studies and experimental trials.

Field of science

  • /engineering and technology/environmental engineering/energy and fuels/fossil energy/gas
  • /natural sciences/chemical sciences/inorganic chemistry/inorganic compounds
  • /social sciences/sociology/governance/public services
  • /engineering and technology/mechanical engineering/vehicle engineering/aerospace engineering/aircraft

Call for proposal

SP1-JTI-CS-2013-02
See other projects for this call

Funding Scheme

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinator

POLITECHNIKA WARSZAWSKA
Address
Plac Politechniki 1
00 661 Warszawa
Poland
Activity type
Higher or Secondary Education Establishments
EU contribution
€ 66 241
Administrative Contact
Ciupinski Lukasz (Dr.)

Participants (2)

SIEC BADAWCZA LUKASIEWICZ-INSTYTUTLOTNICTWA
Poland
EU contribution
€ 122 475
Address
Ul. Al Krakowska 110/114
02 256 Warszawa
Activity type
Research Organisations
Administrative Contact
Krzysztof Spychalski (Mr.)
RISE KIMAB AB
Sweden
EU contribution
€ 261 282
Address
Po Box 7047
164 07 Kista
Activity type
Other
Administrative Contact
Anders Bjorkblad (Dr.)