CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
This deliverable will consist in a report nonconfidential with the outmost results of the project for public dissemination
Conclusions and recommendations report of which wagon components can be manufactured using composites (se abrirá en una nueva ventana)It will contain FRP properties and design considerations as well as recommended joining techniques
Electronic project brochure completed and available for distribution (se abrirá en una nueva ventana)This deliverable will describe the method and results of the electronic project brochure in PDF format at the beginning of the project No problems or deviations expected as it will be prepared with information already available in the proposal The original brochure will be attached to report
Final dissemination brochure completed and available for distribution (se abrirá en una nueva ventana)Electronic project Brochure PDF at the end of the project to present the results In the event that any of the desired results are not achieved the brochure will also be published containing the results successfully achieved The original brochure will be attached to report
Material design requirements for wagon components with AHSS (se abrirá en una nueva ventana)It will describe the mechanical requirements in different wagons components and the proper design procedures to get benefit from the high strength of AHSS in lightweight design
Final recommendations for wagon and loading and unloading designs based on numerical simulation results (se abrirá en una nueva ventana)Based on the results obtained in numerical simulations this deliverable presents the final recommendations on the project designs of wagon and loading and unloading facilities
Validation of models (se abrirá en una nueva ventana)Validation of the numerical mode for flow behaviour is important for trusting the results from the model It also gives a number of the accuracy of the numerical predictions
Operation model in real-time video (se abrirá en una nueva ventana)Report describing the method and results of the video walkthrough showing final loading and unloading operationsThis deliverable depends on the achievement of many others so the main difficulty will be displaying all this information in a condensed lapse of time Moreover including the numerical model cases developed within WP4 and all the studied cases into the video is challenging However even potential deviations might occur in this part of the animation the timing of the process will be exact as it will be cargo volumes and movements of all the involved parts of the system Therefore the resultant visualization will show an almost real scenario with an enormous utility for dissemination activities
Characterisation of surface tension and friction coefficient of already existing paint products in the market (se abrirá en una nueva ventana)It will describe the test method and procedure used and it will present a list of the results of surface tension and friction coefficient values obtained in the tests carried out with commercial paints
Communication Plan (se abrirá en una nueva ventana)This delivery will be updated every 6 months it will list the communication actions foreseen for the 6 months period
Conclusions and recommendation report of structural parts to be manufactured by AHSS (se abrirá en una nueva ventana)It will contain material selection and the recommended joining technologies It will also describe the testing methodologies to get material certification from administration
Website and intranet (se abrirá en una nueva ventana)This deliverable will describe the website created for HERMES and the intranet in which only partners of the project will have accessThe platform for the website will be created by CTM The website will be updated with significant developments during the project and the relevant nonconfidential information and results will be made available on it It will also have a private intranet that will be used for the management of the consortium minutes deliverables etc The link to the website will be attached to the report
Characterisation of the materials and calibration of the constitutive model (se abrirá en una nueva ventana)The first delivery gives the fundamental step to calibrate constitutive models for granular flow behaviour from characterisation data
Publicaciones
Autores:
Karthik Ram Ramakrishnan, Stephane Corn, Nicolas Le Moigne, Patrick Ienny, Romain Leger, Pierre R. Slangen
Publicado en:
Optical Measurement Systems for Industrial Inspection X, 2017, Página(s) 103290P
Editor:
SPIE
DOI:
10.1117/12.2271617
Autores:
Simon Larsson, Gustaf Gustafsson, Hans-Åke Häggblad, Pär Jonsén
Publicado en:
Minerals Engineering, Edición 116, 2018, Página(s) 88-100, ISSN 0892-6875
Editor:
Elsevier BV
DOI:
10.1016/j.mineng.2017.11.003
Autores:
Laurent Puech, Karthik Ram Ramakrishnan, Nicolas Le Moigne, Stéphane Corn, Pierre R. Slangen, Anne Le Duc, Hassane Boudhani, Anne Bergeret
Publicado en:
Composites Part A: Applied Science and Manufacturing, Edición 109, 2018, Página(s) 428-439, ISSN 1359-835X
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.compositesa.2018.03.013
Autores:
Simon Larsson, Gustaf Gustafsson, Aliae Oudich, Pär Jonsén, Hans-Åke Häggblad
Publicado en:
Chemical Engineering Science, Edición 155, 2016, Página(s) 524-536, ISSN 0009-2509
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.ces.2016.09.010
Autores:
Simon Larsson
Publicado en:
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757, 2017, ISBN 978-91-7583-854-0
Editor:
Luleå University of Technology
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles