a LOW environmental impact BRAke SYStem

Resultado final

Vehicle equipped with integrated brake system and brake torque sensors

Vehicle equipped with integrated brake by wire system

“Brake coach”- demonstrator

New real-drive brake cycle for chassis tests

New real-drive brake cycle for chassis dynamometer tests

Project Management Plan

Project Management Plan (incl. risks and contingency planning)

Report on the LCA and LCCA results

Socio-economic and market impact

Report with socio-economic impact and market evaluations of the new brake system

Guidance with policy recommendations

Organisation of Workshop 2 (training activities)

Organisation of Workshop 1 (training activities)

Final conference

Publicaciones

Results on brake wear particle measurements

Autores: Farwick zum Hagen Ferdinand; Mathissen Marcel; Grabiec Tomasz; Hennicke Tim; Rettig Marc; Grochowicz Jaroslaw; Vogt Rainer; Benter Thorsten
Publicado en: 2018
Editor: Eurobrake 2018

Could pin-on-disc tribometers be used to study the friction/wear performanceof disc brake materials?

Autores: Metinöz I., Matějka V., Alemani M., Wahlström J.
Publicado en: 2016
Editor: Eurobrake

Evaluation of an Eco audit tool- Through an LCA of a novel car disc brake

Autores: Gradin K., Hedlund A.
Publicado en: 2018, ISBN 978-91-7685-185-2
Editor: The Design Society

A numerical study of disc brakes wear dependence of rotor surface coating

Autores: G. Riva and J. Wahlström
Publicado en: 2018
Editor: Eurobrake

Lyu Y., Wahlström J., Matějka V., Söderberg A.

Autores: Ranking of conventional and novel disc brake materials with respect to airborne particle emissions
Publicado en: 2017
Editor: Eurobrake

A CFD study of a pin-on-disc tribometer setup focusing on airborne particle sampling efficiency

Autores: Riva G., Wahlström J., Alemani M., Olofsson U.
Publicado en: 2017
Editor: EcoTrib

A dyno bench sampling procedure for brake particle emission evaluation

Autores: Alemani M., Perricone G., Valota G., Riccobono F., Ciotti A.
Publicado en: EuroBrake 2018 Conference Proceedings, 2018, ISBN 978-0-9572076-5-3
Editor: FISITA, May 2018

The LowBraSys project: a journey towards a low environmental impact brake system

Autores: Alemani, Mattia; Perricone, Guido; Valota, Giorgio; Giordano, Gianmarco; Müller, Sebastian; Morbach Marcus; Cerri, Walter; Grochowicz,Jaroslaw; Vogt, Rainer; Mathissen, Marcel.
Publicado en: EuroBrake 2019 Conference Proceedings, Annual, 2019, ISBN 978-0-9572076-3-9
Editor: FISITA

THE LOWBRASYS PROJECT: PARTICLE MEASUREMENT PROCEDURE FOR BRAKE EMISSION TESTS

Autores: F. Riccobono (1), T. Grigoratos (1), G. Perricone (2), G. Straffellini (3), J. Wahlström (4) and the LOWBRASYS Consortium
Publicado en: 2016
Editor: Air Quality Conference 2016

RANKING OF CONVENTIONAL AND NOVEL DISC BRAKE MATERIALS WITH RESPECT TO AIRBORNE PARTICLE EMISSIONS

Autores: Yezhe Lyu, Jens Wahlström, Vlastimil Matjeka, and Anders Söderberg
Publicado en: 2017
Editor: Eurobrake Conference 2017

Microscopic study of friction layer and the distribution of components in automotive brake pads

Autores: Katerina Dedkova, Pavlina Peikertova, Tamara Wilhelmi, Marcus Morbach, Jana Kukutschova
Publicado en: 2016
Editor: European Microscopy Conference 2016

A pin-on-disc tribometer study of disc brake contact pairs with respect to wear and airborne particle emissions

Autores: Jens Wahlström, Yezhe Lyu, Vlastimil Matjeka, Anders Söderberg
Publicado en: Wear, 384-385, 2017, Page(s) 124-130, ISSN 0043-1648
Editor: Elsevier BV
DOI: 10.1016/j.wear.2017.05.011

Contact Pressure and Sliding Velocity Maps of the Friction, Wear and Emission from a Low-Metallic/Cast-Iron Disc Brake Contact Pair

Autores: J. Wahlström, V. Matejka, Y. Lyu, A. Söderberg
Publicado en: Tribology in Industry, 39/4, 2017, Page(s) 460-470, ISSN 0354-8996
Editor: University of Kragujevac
DOI: 10.24874/ti.2017.39.04.05

A Friction, Wear and Emission Tribometer Study of Non-Asbestos Organic Pins Sliding Against AlSiC MMC Discs

Autores: Y. Lyu, J. Wahlström, M. Tu, U. Olofsson
Publicado en: Tribology in Industry, 40/2, 2018, Page(s) 274-282, ISSN 0354-8996
Editor: University of Kragujevac
DOI: 10.24874/ti.2018.40.02.11

Study of Brake Wear Particle Emissions: Impact of Braking and Cruising Conditions

Autores: Ferdinand H. Farwick zum Hagen, Marcel Mathissen, Tomasz Grabiec, Tim Hennicke, Marc Rettig, Jaroslaw Grochowicz, Rainer Vogt, Thorsten Benter
Publicado en: Environmental Science & Technology, 2019, ISSN 0013-936X
Editor: American Chemical Society
DOI: 10.1021/acs.est.8b07142

Simulation of Contact Area and Pressure Dependence of Initial Surface Roughness for Cermet-Coated Discs Used in Disc Brakes

Autores: G. Riva, G. Perricone, J. Wahlström
Publicado en: Tribology in Industry, 41/1, 2019, Page(s) 1-13, ISSN 0354-8996
Editor: University of Kragujevac
DOI: 10.24874/ti.2019.41.01.01

Nanocomposite Kaolin/TiO 2 as a Possible Functional Filler in Automotive Brake Pads

Autores: Kateřina Dědková, Marcus Morbach, Jakub Výravský, Kateřina Mamulová Kutláková, Kristina Čabanová, Miroslav Vaculík, Jana Kukutschová
Publicado en: Journal of Nanomaterials, 2018, 2018, Page(s) 1-14, ISSN 1687-4110
Editor: Hindawi Publishing Corporation
DOI: 10.1155/2018/9780894

Characterization of airborne wear debris produced by brake pads pressed against HVOF-coated discs

Autores: C. Menapace, A. Mancini, M. Federici, G. Straffelini, S. Gialanella
Publicado en: Friction, 2019, ISSN 2223-7690
Editor: Tsinghua University Press Springer
DOI: 10.1007/s40544-019-0284-4

Pin-on-Disc Testing of Low-Metallic Friction Material Sliding Against HVOF Coated Cast Iron: Modelling of the Contact Temperature Evolution

Autores: Matteo Federici, Giovanni Straffelini, Stefano Gialanella
Publicado en: Tribology Letters, 65/4, 2017, ISSN 1023-8883
Editor: Kluwer Academic/Plenum Publishers
DOI: 10.1007/s11249-017-0904-y

Pin-on-disc study of a friction material dry sliding against HVOF coated discs at room temperature and 300 °C

Autores: Matteo Federici, Cinzia Menapace, Alessandro Moscatelli, Stefano Gialanella, Giovanni Straffelini
Publicado en: Tribology International, 115, 2017, Page(s) 89-99, ISSN 0301-679X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.triboint.2017.05.030

Sliding Behaviour of Friction Material Against Cermet Coatings: Pin-on-Disc Study of the Running-in Stage

Autores: Matteo Federici, Guido Perricone, Stefano Gialanella, Giovanni Straffelini
Publicado en: Tribology Letters, 66/2, 2018, ISSN 1023-8883
Editor: Kluwer Academic/Plenum Publishers
DOI: 10.1007/s11249-018-1004-3

A Test Stand Study on the Volatile Emissions of a Passenger Car Brake Assembly

Autores: Perricone, Matĕjka, Alemani, Wahlström, Olofsson
Publicado en: Atmosphere, 10/5, 2019, Page(s) 263, ISSN 2073-4433
Editor: Rotoweb Cantelli
DOI: 10.3390/atmos10050263

A proposed driving cycle for brake emissions investigation for test stand

Autores: Guido Perricone, Mattia Alemani, Jens Wahlström, Ulf Olofsson
Publicado en: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2019, 2019, Page(s) 095440701984122, ISSN 0954-4070
Editor: Mechanical Engineering Publications Ltd.
DOI: 10.1177/0954407019841222

A Factorial Design to Numerically Study the Effects of Brake Pad Properties on Friction and Wear Emissions

Autores: Jens Wahlström
Publicado en: Advances in Tribology, 2016, 2016, Page(s) 1-10, ISSN 1687-5915
Editor: Hindawi Publishing Corporation
DOI: 10.1155/2016/8181260

Lowbrasys brake wear cycle - 3h LACT

Autores: Mathissen, Marcel; Evans, Charles
Publicado en: 2019
Editor: Mendeley Data
DOI: 10.17632/4cgs6myx9d.1

Microscopic evaluation of chemical and morphological changes in automotive brake materials in relation to friction processes

Autores: Kateřina Dědková
Publicado en: 2018
Editor: Ostrava University

Conjuntos de datos

Lowbrasys brake wear cycle - 3h LACT

Autores: Mathissen, Marcel
Publicado en: Mendeley

Resultado final

Publicaciones

Conjuntos de datos

Compartir esta página

Descargar