Development and experimental validation of computational models for cavitating flows, surface erosion damage and material loss

Resultado final

Project website

Project website set up

Erosion model 1

Implementation of surface erosion indication model.

Interface tracking

DNS methodology for bubble dynamics with interface tracking

MHV data

Complete set of measurements for MHV cavitation

Barotropic LES

LES methodology with effective mixture equation of state

TUM-LES validation

LES model validation and application to fuel injectors

Conference paper

Conference paper produced and published

MHV test rig

Refractive index rig for mechanical heart valve

Vortex data

Complete set of cavitating vortex measurements

Journals

Journal papers published gradually over the 48 months process.

Control valve cavitation

Simulation of cavitation in control valves in the presence of solid particle stack between valve plates

Marine propeller and Kaplan turbine

Model application to marine propeller and Kaplan turbine

Erosion and atomisation

Coupled simulation of nozzle erosion and fuel atomisation.

DNS-derived bubble pressure

DNS results for single-bubble and bubble cloud collapse.

Abrasive particle cavitation

Parametric studies from control valve test case using abrasive wear particles

Publicaciones

A NUMERICAL STUDY ON THE SHEDDING FREQUENCY OF SHEET CAVITATION

Autores: Themistoklis I. Melissaris, Norbert Bulten and Tom van Terwisga
Publicado en: MARINE 2017 Computational Methods in Marine Engineering VII, Edición Every two years, 2017, Página(s) 801-812, ISBN 978-84-946909-8-3
Editor: International Center for Numerical Methods in Engineering (CIMNE)

On the Cavitation Erosion Prediction Using a URANS Method

Autores: Themistoklis I. Melissaris, Norbert Bulten and Tom van Terwisga
Publicado en: 20th Numerical Towing Tank Symposium (NuTTS 2017), Edición Every year, 2017, Página(s) 139-144, ISBN 978-1-5108-5218-1
Editor: Maritime Research Institute Netherlands (MARIN)

A multi-scale Eulerian-Lagrangian model for simulation of cavitating flows

Autores: Ebrahim Ghahramani and Rickard Bensow
Publicado en: 19th Numerical Towing Tank Symposium (NuTTS 2016), Edición 3-4 October 2016, 2016, Página(s) 37-42, ISBN 9781-510831872
Editor: CENTRALE NANTES

A tabulated data technique for cryogenic two-phase flows

Autores: Nikolaos Kyriazis, Phoevos Koukouvinis, Ioannis Karathanassis and Manolis Gavaises
Publicado en: ECFD2018, Edición Every 4 years, 2018, Página(s) 585-596, ISBN 978-84-947311-6-7
Editor: http://www.eccm-ecfd2018.org

Smoothed Particle Hydrodynamics simulations of cavitation bubble collapse induced plasticity

Autores: Joshi , Shrey; Franc , Jean-Pierre; Ghigliotti , Giovanni; Fivel , Marc
Publicado en: 2nd International Conference on Advanced Modelling of Wave Propagation in Solids, Sep 2018, Prague, Czech Republic, Edición 4, 2018, Página(s) 45-46
Editor: The ECCOMAS Regional Conference

Numerical simulation of compressible cavitating two-phase flows with a pressure-based solver

Autores: Marco Cristofaro, Wilfried Edelbauer, Manolis Gavaises, Phoevos Koukouvinis
Publicado en: Proceedings ILASS–Europe 2017. 28th Conference on Liquid Atomization and Spray Systems, Edición every year, 2017, Página(s) 1-8, ISBN 9788-490485804
Editor: Universitat Politècnica València
DOI: 10.4995/ILASS2017.2017.4629

Density-based Compressible Solver with Equilibrium Cavitation Model in OpenFOAM

Autores: Mohammad Hossein Arabnejad , Rickard Bensow ,Claes Eskilsson
Publicado en: 19th Numerical Towing Tank Symposium, Edición NuTTS 2016, 2016, Página(s) 5-10, ISBN 978-1-5108-3187-2
Editor: 19th Numerical Towing Tank Symposium

Simulating Compressibility in Cavitating Flows with an Incompressible Mass Transfer Flow Solver

Autores: Sören Schenke and Tom J.C. van Terwisga
Publicado en: SMP '17: 5th International Symposium on Marine Propulsors, Edición 5th (2017), 2017, Página(s) 71-79, ISBN 978-951-38-8606-6
Editor: VTT Technical Research Centre of Finland

Numerical Prediction of Vortex Dynamics in Inviscid Sheet Cavitation

Autores: Sören Schenke and Tom J.C. van Terwisga
Publicado en: 20th Numerical Towing Tank Symposium (NuTTS 2017), Edición every year, 2017, Página(s) 197-202, ISBN 978-1-5108-5218-1
Editor: Curran

Finite Mass Transfer Effects in Cavitation Modelling

Autores: Sören Schenke and Tom J.C. van Terwisga
Publicado en: 19th Numerical Towing Tank Symposium (NuTTS 2016), Edición every year, 2017, Página(s) 132-137, ISBN 978-1-5108-3187-2
Editor: Curran

A Methodology to Identify Erosive Collapse Events in Incompressible Simulation of Cavitating flows

Autores: Mohammad Hossein Arabnejad, Rickard Bensow
Publicado en: 20th Numerical Towing Tank Symposium, Edición NuTTS 2017, 2017, Página(s) 28-33, ISBN 9781-510852181
Editor: 20th Numerical Towing Tank Symposium

High-speed X-Ray Phase Contrast Imaging of String Cavitation in a Diesel Injector Orifice

Autores: Ioannis Karathanassis, Phoevos Koukouvinis, Massimo Lorenzi, Efstathios Kontolatis, Zhilong Li, Jin Wang, N. Mitroglou, Manolis Gavaises
Publicado en: Proceedings ILASS–Europe 2017. 28th Conference on Liquid Atomization and Spray Systems, Edición 2017/7/28, 2017, Página(s) 1019-1026, ISBN 9788-490485804
Editor: Universitat Politècnica València
DOI: 10.4995/ILASS2017.2017.4996

A hybrid model for simulation of cavitating flows

Autores: Ebrahim Ghahramani, Mohammad Hossein Arabnejad , Rickard Bensow
Publicado en: OpenFOAM Workshop, Edición 12th OpenFOAM Workshop, 2017
Editor: OpenFOAM® Workshop

An experimental study on suppressing Tip Vortex Cavitation by means of a Flexible Thread

Autores: Jeonghwa Seo, Ali Amini, Seung Jae Lee, Jongyeol Park, Honggu Yeo, Mohamed Farhat, Shin Hyung Rhee
Publicado en: APS DFD 2018, Edición Every year, 2017
Editor: American Physical Society

Coupling of the cavitation mixture model with the discrete bubble model

Autores: Ebrahim Ghahramani , Rickard Bensow
Publicado en: 20th Numerical Towing Tank Symposium, Edición NuTTS 2017, 2017, Página(s) 68-73
Editor: 20th Numerical Towing Tank Symposium

Effect of Gas Content on Tip Vortex Cavitation

Autores: Ali Amini, Martino Reclari, Takeshi Sano, Mohamed Farhat
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 322-325, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch62

Simulating the Effect of In-Nozzle Cavitation on Liquid Atomisation Using a Three-Phase Model

Autores: M.G. Mithun, P. Koukouvnis, I. K. Karathanassis, M. Gavaises
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 920-924, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch175

Large Eddy Simulation of the Internal Injector Flow During Pilot Injection

Autores: Marco Cristofaro, Wilfried Edelbauer, Phoevos Koukouvinis, Manolis Gavaises
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 665-668, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch127

Initial Findings of an Investigation on the Removal of the Cavitation Erosion Risk in a Prototype Control Orifice Inside a Diesel Injector

Autores: Maxwell Brunhart, Celia Soteriou, Christian Daveau, Manolis Gavaises, Phoevos Koukouvinis, Mark Winterbourn
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 556-560, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch106

On Cavitation Aggressiveness and Cavitation Erosion on Marine Propellers using a URANS Method

Autores: Themistoklis Melissaris, Norbert Bulten, Tom van Terwisga
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 838-843, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch160

Erosive Aggressiveness of Collapsing Cavitating Structures

Autores: Sören Schenke, Tom J.C. van Terwisga
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 357-362, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch69

Cavitation Induction by Projectile Impacting on a Water Jet

Autores: E. Stavropoulos Vasilakis, P. Koukouvinis, M. Farhat, M. Gavaises
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 222-226, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch43

Analysis of the Finite Mass Transfer Models in the Numerical Simulation of Bubbly Flows

Autores: Ebrahim Ghahramani, Rickard E. Bensow
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 89-93, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch18

X-ray Computed Tomography of Cavitating Flow in a Converging-Diverging Nozzle

Autores: Saad Jahangir, Evert C. Wagner, Robert F. Mudde, Christian Poelma
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 1104-1108, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch209

Heating Effects During Bubble Collapse Using Tabulated Data

Autores: Nikolaos Kyriazis, Phoevos Koukouvinis, Manolis Gavaises, Richard Pearson, Martin Gold
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 495-499, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch94

Numerical Investigation of the Dynamics of Pressure Loading on a Solid Boundary from a Collapsing Cavitation Bubble

Autores: Prasanta Sarkar, Giovanni Ghigliotti, Marc Fivel, Jean-Pierre Franc
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 765-770, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch146

Numerical Simulation of Collapsing Vapor Bubble Clusters Close to a Rigid Wall

Autores: Daria Ogloblina, Steffen J. Schmidt, Nikolaus A. Adams
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 783-788, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch149

Numerical Investigation of Cavitation-Regimes in a Converging-Diverging Nozzle

Autores: Polina Gorkh, Steffen J. Schmidt, Nikolaus A. Adams
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 760-764, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch145

Modeling Fluid-Structure Interaction in Cavitation Erosion using Smoothed Particle Hydrodynamics

Autores: Shrey Joshi, Jean Pierre Franc, Giovanni Ghigliotti, Marc Fivel
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 716-721, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch137

Experimental and Numerical Investigation of the Cavitating Flows over a Modified NACA0009 Foil

Autores: Mohammad Hossein Arabnejad, Ali Amini, Rickard Bensow, Mohamed Farhat
Publicado en: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Edición every three years, 2018, Página(s) 369-373, ISBN 9780-791861851
Editor: ASME Press
DOI: 10.1115/1.861851_ch71

Simulation and analysis of collapsing vapor-bubble clusters with special emphasis on potentially erosive impact loads at walls

Autores: Daria Ogloblina, Steffen J. Schmidt, Nikolaus A. Adams
Publicado en: EPJ Web of Conferences, Edición 180, 2018, Página(s) 02079, ISSN 2100-014X
Editor: EDP Sciences
DOI: 10.1051/epjconf/201817002079

Dynamics of partial cavitation in an axisymmetric converging-diverging nozzle

Autores: Saad Jahangir, Willian Hogendoorn, Christian Poelma
Publicado en: International Journal of Multiphase Flow, Edición 106, 2018, Página(s) 34-45, ISSN 0301-9322
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijmultiphaseflow.2018.04.019

High-speed visualization of vortical cavitation using synchrotron radiation

Autores: Ioannis K. Karathanassis, Phoevos Koukouvinis, Efstathios Kontolatis, Zhilong Lee, Jin Wang, Nicholas Mitroglou, Manolis Gavaises
Publicado en: Journal of Fluid Mechanics, Edición 838, 2018, Página(s) 148-164, ISSN 0022-1120
Editor: Cambridge University Press
DOI: 10.1017/jfm.2017.885

Modelling cavitation during drop impact on solid surfaces

Autores: Nikolaos Kyriazis, Phoevos Koukouvinis, Manolis Gavaises
Publicado en: Advances in Colloid and Interface Science, Edición 260, 2018, Página(s) 46-64, ISSN 0001-8686
Editor: Elsevier BV
DOI: 10.1016/j.cis.2018.08.004

Smoothed particle hydrodynamics simulation of a laser pulse impact onto a liquid metal droplet

Autores: Phoevos Koukouvinis, Nikolaos Kyriazis, Manolis Gavaises
Publicado en: PLOS ONE, Edición 13/9, 2018, Página(s) e0204125, ISSN 1932-6203
Editor: Public Library of Science
DOI: 10.1371/journal.pone.0204125

Direct comparison of shadowgraphy and X-ray imaging for void fraction determination

Autores: Amitosh Dash, Saad Jahangir, Christian Poelma
Publicado en: Measurement Science and Technology, Edición Volume 29, Number 12:125303, 2018, 2018, Página(s) 1-11, ISSN 0957-0233
Editor: Institute of Physics and the Physical Society
DOI: 10.1088/1361-6501/aaea49

Realizability improvements to a hybrid mixture-bubble model for simulation of cavitating flows

Autores: Ebrahim Ghahramani, Mohammad Hossein Arabnejad, Rickard E. Bensow
Publicado en: Computers & Fluids, Edición 174, 2018, Página(s) 135-143, ISSN 0045-7930
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compfluid.2018.06.025

An energy conservative method to predict the erosive aggressiveness of collapsing cavitating structures and cavitating flows from numerical simulations

Autores: Sören Schenke, Tom J.C. van Terwisga
Publicado en: International Journal of Multiphase Flow, Edición 111, 2019, Página(s) 200-218, ISSN 0301-9322
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijmultiphaseflow.2018.11.016

A comparative study between numerical methods in simulation of cavitating bubbles

Autores: Ebrahim Ghahramani, Mohammad Hossein Arabnejad, Rickard E. Bensow
Publicado en: International Journal of Multiphase Flow, Edición Volume 111, February 2019 Volume 111, 2018, Página(s) 339-359, ISSN 0301-9322
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijmultiphaseflow.2018.10.010

SPH modelling of a cavitation bubble collapse near an elasto-visco-plastic material

Autores: Shrey Joshi, Jean Pierre Franc, Giovanni Ghigliotti, Marc Fivel
Publicado en: Journal of the Mechanics and Physics of Solids, Edición 125, 2019, Página(s) 420-439, ISSN 0022-5096
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2018.12.016

Numerical investigations on bubble-induced jetting and shock wave focusing: application on a needle-free injection

Autores: Nikolaos Kyriazis, Phoevos Koukouvinis, Manolis Gavaises
Publicado en: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Edición 475/2222, 2019, Página(s) 20180548, ISSN 1364-5021
Editor: Royal Society of London
DOI: 10.1098/rspa.2018.0548

Numerical investigation of bubble dynamics using tabulated data

Autores: Nikolaos Kyriazis, Phoevos Koukouvinis, Manolis Gavaises
Publicado en: International Journal of Multiphase Flow, Edición 93, 2017, Página(s) 158-177, ISSN 0301-9322
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.ijmultiphaseflow.2017.04.004

Numerical and Experimental Investigation of Hydrodynamic Mechanisms in Erosive Sheet Cavitation

Autores: Arabnejad Khanouki, Mohammad Hossein
Publicado en: Edición 7, 2018
Editor: Chalmers University of Technology

A Realizable Hybrid Mixture-Bubble Model for Cavitating Flows

Autores: Ghahramani, Ebrahim
Publicado en: Edición 8, 2018
Editor: Chalmers University of Technology

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página

Descargar