Development and experimental validation of computational models for cavitating flows, surface erosion damage and material loss

Livrables

Project website

Project website set up

Erosion model 1

Implementation of surface erosion indication model.

Interface tracking

DNS methodology for bubble dynamics with interface tracking

MHV data

Complete set of measurements for MHV cavitation

Barotropic LES

LES methodology with effective mixture equation of state

TUM-LES validation

LES model validation and application to fuel injectors

Conference paper

Conference paper produced and published

MHV test rig

Refractive index rig for mechanical heart valve

Vortex data

Complete set of cavitating vortex measurements

Journals

Journal papers published gradually over the 48 months process.

Control valve cavitation

Simulation of cavitation in control valves in the presence of solid particle stack between valve plates

Marine propeller and Kaplan turbine

Model application to marine propeller and Kaplan turbine

Erosion and atomisation

Coupled simulation of nozzle erosion and fuel atomisation.

DNS-derived bubble pressure

DNS results for single-bubble and bubble cloud collapse.

Abrasive particle cavitation

Parametric studies from control valve test case using abrasive wear particles

Publications

A NUMERICAL STUDY ON THE SHEDDING FREQUENCY OF SHEET CAVITATION

Auteurs: Themistoklis I. Melissaris, Norbert Bulten and Tom van Terwisga
Publié dans: MARINE 2017 Computational Methods in Marine Engineering VII, Numéro Every two years, 2017, Page(s) 801-812, ISBN 978-84-946909-8-3
Éditeur: International Center for Numerical Methods in Engineering (CIMNE)

On the Cavitation Erosion Prediction Using a URANS Method

Auteurs: Themistoklis I. Melissaris, Norbert Bulten and Tom van Terwisga
Publié dans: 20th Numerical Towing Tank Symposium (NuTTS 2017), Numéro Every year, 2017, Page(s) 139-144, ISBN 978-1-5108-5218-1
Éditeur: Maritime Research Institute Netherlands (MARIN)

A multi-scale Eulerian-Lagrangian model for simulation of cavitating flows

Auteurs: Ebrahim Ghahramani and Rickard Bensow
Publié dans: 19th Numerical Towing Tank Symposium (NuTTS 2016), Numéro 3-4 October 2016, 2016, Page(s) 37-42, ISBN 9781-510831872
Éditeur: CENTRALE NANTES

A tabulated data technique for cryogenic two-phase flows

Auteurs: Nikolaos Kyriazis, Phoevos Koukouvinis, Ioannis Karathanassis and Manolis Gavaises
Publié dans: ECFD2018, Numéro Every 4 years, 2018, Page(s) 585-596, ISBN 978-84-947311-6-7
Éditeur: http://www.eccm-ecfd2018.org

Smoothed Particle Hydrodynamics simulations of cavitation bubble collapse induced plasticity

Auteurs: Joshi , Shrey; Franc , Jean-Pierre; Ghigliotti , Giovanni; Fivel , Marc
Publié dans: 2nd International Conference on Advanced Modelling of Wave Propagation in Solids, Sep 2018, Prague, Czech Republic, Numéro 4, 2018, Page(s) 45-46
Éditeur: The ECCOMAS Regional Conference

Numerical simulation of compressible cavitating two-phase flows with a pressure-based solver

Auteurs: Marco Cristofaro, Wilfried Edelbauer, Manolis Gavaises, Phoevos Koukouvinis
Publié dans: Proceedings ILASS–Europe 2017. 28th Conference on Liquid Atomization and Spray Systems, Numéro every year, 2017, Page(s) 1-8, ISBN 9788-490485804
Éditeur: Universitat Politècnica València
DOI: 10.4995/ILASS2017.2017.4629

Density-based Compressible Solver with Equilibrium Cavitation Model in OpenFOAM

Auteurs: Mohammad Hossein Arabnejad , Rickard Bensow ,Claes Eskilsson
Publié dans: 19th Numerical Towing Tank Symposium, Numéro NuTTS 2016, 2016, Page(s) 5-10, ISBN 978-1-5108-3187-2
Éditeur: 19th Numerical Towing Tank Symposium

Simulating Compressibility in Cavitating Flows with an Incompressible Mass Transfer Flow Solver

Auteurs: Sören Schenke and Tom J.C. van Terwisga
Publié dans: SMP '17: 5th International Symposium on Marine Propulsors, Numéro 5th (2017), 2017, Page(s) 71-79, ISBN 978-951-38-8606-6
Éditeur: VTT Technical Research Centre of Finland

Numerical Prediction of Vortex Dynamics in Inviscid Sheet Cavitation

Auteurs: Sören Schenke and Tom J.C. van Terwisga
Publié dans: 20th Numerical Towing Tank Symposium (NuTTS 2017), Numéro every year, 2017, Page(s) 197-202, ISBN 978-1-5108-5218-1
Éditeur: Curran

Finite Mass Transfer Effects in Cavitation Modelling

Auteurs: Sören Schenke and Tom J.C. van Terwisga
Publié dans: 19th Numerical Towing Tank Symposium (NuTTS 2016), Numéro every year, 2017, Page(s) 132-137, ISBN 978-1-5108-3187-2
Éditeur: Curran

A Methodology to Identify Erosive Collapse Events in Incompressible Simulation of Cavitating flows

Auteurs: Mohammad Hossein Arabnejad, Rickard Bensow
Publié dans: 20th Numerical Towing Tank Symposium, Numéro NuTTS 2017, 2017, Page(s) 28-33, ISBN 9781-510852181
Éditeur: 20th Numerical Towing Tank Symposium

High-speed X-Ray Phase Contrast Imaging of String Cavitation in a Diesel Injector Orifice

Auteurs: Ioannis Karathanassis, Phoevos Koukouvinis, Massimo Lorenzi, Efstathios Kontolatis, Zhilong Li, Jin Wang, N. Mitroglou, Manolis Gavaises
Publié dans: Proceedings ILASS–Europe 2017. 28th Conference on Liquid Atomization and Spray Systems, Numéro 2017/7/28, 2017, Page(s) 1019-1026, ISBN 9788-490485804
Éditeur: Universitat Politècnica València
DOI: 10.4995/ILASS2017.2017.4996

A hybrid model for simulation of cavitating flows

Auteurs: Ebrahim Ghahramani, Mohammad Hossein Arabnejad , Rickard Bensow
Publié dans: OpenFOAM Workshop, Numéro 12th OpenFOAM Workshop, 2017
Éditeur: OpenFOAM® Workshop

An experimental study on suppressing Tip Vortex Cavitation by means of a Flexible Thread

Auteurs: Jeonghwa Seo, Ali Amini, Seung Jae Lee, Jongyeol Park, Honggu Yeo, Mohamed Farhat, Shin Hyung Rhee
Publié dans: APS DFD 2018, Numéro Every year, 2017
Éditeur: American Physical Society

Coupling of the cavitation mixture model with the discrete bubble model

Auteurs: Ebrahim Ghahramani , Rickard Bensow
Publié dans: 20th Numerical Towing Tank Symposium, Numéro NuTTS 2017, 2017, Page(s) 68-73
Éditeur: 20th Numerical Towing Tank Symposium

Effect of Gas Content on Tip Vortex Cavitation

Auteurs: Ali Amini, Martino Reclari, Takeshi Sano, Mohamed Farhat
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 322-325, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch62

Simulating the Effect of In-Nozzle Cavitation on Liquid Atomisation Using a Three-Phase Model

Auteurs: M.G. Mithun, P. Koukouvnis, I. K. Karathanassis, M. Gavaises
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 920-924, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch175

Large Eddy Simulation of the Internal Injector Flow During Pilot Injection

Auteurs: Marco Cristofaro, Wilfried Edelbauer, Phoevos Koukouvinis, Manolis Gavaises
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 665-668, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch127

Initial Findings of an Investigation on the Removal of the Cavitation Erosion Risk in a Prototype Control Orifice Inside a Diesel Injector

Auteurs: Maxwell Brunhart, Celia Soteriou, Christian Daveau, Manolis Gavaises, Phoevos Koukouvinis, Mark Winterbourn
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 556-560, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch106

On Cavitation Aggressiveness and Cavitation Erosion on Marine Propellers using a URANS Method

Auteurs: Themistoklis Melissaris, Norbert Bulten, Tom van Terwisga
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 838-843, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch160

Erosive Aggressiveness of Collapsing Cavitating Structures

Auteurs: Sören Schenke, Tom J.C. van Terwisga
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 357-362, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch69

Cavitation Induction by Projectile Impacting on a Water Jet

Auteurs: E. Stavropoulos Vasilakis, P. Koukouvinis, M. Farhat, M. Gavaises
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 222-226, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch43

Analysis of the Finite Mass Transfer Models in the Numerical Simulation of Bubbly Flows

Auteurs: Ebrahim Ghahramani, Rickard E. Bensow
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 89-93, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch18

X-ray Computed Tomography of Cavitating Flow in a Converging-Diverging Nozzle

Auteurs: Saad Jahangir, Evert C. Wagner, Robert F. Mudde, Christian Poelma
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 1104-1108, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch209

Heating Effects During Bubble Collapse Using Tabulated Data

Auteurs: Nikolaos Kyriazis, Phoevos Koukouvinis, Manolis Gavaises, Richard Pearson, Martin Gold
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 495-499, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch94

Numerical Investigation of the Dynamics of Pressure Loading on a Solid Boundary from a Collapsing Cavitation Bubble

Auteurs: Prasanta Sarkar, Giovanni Ghigliotti, Marc Fivel, Jean-Pierre Franc
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 765-770, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch146

Numerical Simulation of Collapsing Vapor Bubble Clusters Close to a Rigid Wall

Auteurs: Daria Ogloblina, Steffen J. Schmidt, Nikolaus A. Adams
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 783-788, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch149

Numerical Investigation of Cavitation-Regimes in a Converging-Diverging Nozzle

Auteurs: Polina Gorkh, Steffen J. Schmidt, Nikolaus A. Adams
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 760-764, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch145

Modeling Fluid-Structure Interaction in Cavitation Erosion using Smoothed Particle Hydrodynamics

Auteurs: Shrey Joshi, Jean Pierre Franc, Giovanni Ghigliotti, Marc Fivel
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 716-721, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch137

Experimental and Numerical Investigation of the Cavitating Flows over a Modified NACA0009 Foil

Auteurs: Mohammad Hossein Arabnejad, Ali Amini, Rickard Bensow, Mohamed Farhat
Publié dans: Proceedings of the 10th International Symposium on Cavitation (CAV2018), Numéro every three years, 2018, Page(s) 369-373, ISBN 9780-791861851
Éditeur: ASME Press
DOI: 10.1115/1.861851_ch71

Simulation and analysis of collapsing vapor-bubble clusters with special emphasis on potentially erosive impact loads at walls

Auteurs: Daria Ogloblina, Steffen J. Schmidt, Nikolaus A. Adams
Publié dans: EPJ Web of Conferences, Numéro 180, 2018, Page(s) 02079, ISSN 2100-014X
Éditeur: EDP Sciences
DOI: 10.1051/epjconf/201817002079

Dynamics of partial cavitation in an axisymmetric converging-diverging nozzle

Auteurs: Saad Jahangir, Willian Hogendoorn, Christian Poelma
Publié dans: International Journal of Multiphase Flow, Numéro 106, 2018, Page(s) 34-45, ISSN 0301-9322
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.ijmultiphaseflow.2018.04.019

High-speed visualization of vortical cavitation using synchrotron radiation

Auteurs: Ioannis K. Karathanassis, Phoevos Koukouvinis, Efstathios Kontolatis, Zhilong Lee, Jin Wang, Nicholas Mitroglou, Manolis Gavaises
Publié dans: Journal of Fluid Mechanics, Numéro 838, 2018, Page(s) 148-164, ISSN 0022-1120
Éditeur: Cambridge University Press
DOI: 10.1017/jfm.2017.885

Modelling cavitation during drop impact on solid surfaces

Auteurs: Nikolaos Kyriazis, Phoevos Koukouvinis, Manolis Gavaises
Publié dans: Advances in Colloid and Interface Science, Numéro 260, 2018, Page(s) 46-64, ISSN 0001-8686
Éditeur: Elsevier BV
DOI: 10.1016/j.cis.2018.08.004

Smoothed particle hydrodynamics simulation of a laser pulse impact onto a liquid metal droplet

Auteurs: Phoevos Koukouvinis, Nikolaos Kyriazis, Manolis Gavaises
Publié dans: PLOS ONE, Numéro 13/9, 2018, Page(s) e0204125, ISSN 1932-6203
Éditeur: Public Library of Science
DOI: 10.1371/journal.pone.0204125

Direct comparison of shadowgraphy and X-ray imaging for void fraction determination

Auteurs: Amitosh Dash, Saad Jahangir, Christian Poelma
Publié dans: Measurement Science and Technology, Numéro Volume 29, Number 12:125303, 2018, 2018, Page(s) 1-11, ISSN 0957-0233
Éditeur: Institute of Physics and the Physical Society
DOI: 10.1088/1361-6501/aaea49

Realizability improvements to a hybrid mixture-bubble model for simulation of cavitating flows

Auteurs: Ebrahim Ghahramani, Mohammad Hossein Arabnejad, Rickard E. Bensow
Publié dans: Computers & Fluids, Numéro 174, 2018, Page(s) 135-143, ISSN 0045-7930
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compfluid.2018.06.025

An energy conservative method to predict the erosive aggressiveness of collapsing cavitating structures and cavitating flows from numerical simulations

Auteurs: Sören Schenke, Tom J.C. van Terwisga
Publié dans: International Journal of Multiphase Flow, Numéro 111, 2019, Page(s) 200-218, ISSN 0301-9322
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.ijmultiphaseflow.2018.11.016

A comparative study between numerical methods in simulation of cavitating bubbles

Auteurs: Ebrahim Ghahramani, Mohammad Hossein Arabnejad, Rickard E. Bensow
Publié dans: International Journal of Multiphase Flow, Numéro Volume 111, February 2019 Volume 111, 2018, Page(s) 339-359, ISSN 0301-9322
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.ijmultiphaseflow.2018.10.010

SPH modelling of a cavitation bubble collapse near an elasto-visco-plastic material

Auteurs: Shrey Joshi, Jean Pierre Franc, Giovanni Ghigliotti, Marc Fivel
Publié dans: Journal of the Mechanics and Physics of Solids, Numéro 125, 2019, Page(s) 420-439, ISSN 0022-5096
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.jmps.2018.12.016

Numerical investigations on bubble-induced jetting and shock wave focusing: application on a needle-free injection

Auteurs: Nikolaos Kyriazis, Phoevos Koukouvinis, Manolis Gavaises
Publié dans: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Numéro 475/2222, 2019, Page(s) 20180548, ISSN 1364-5021
Éditeur: Royal Society of London
DOI: 10.1098/rspa.2018.0548

Numerical investigation of bubble dynamics using tabulated data

Auteurs: Nikolaos Kyriazis, Phoevos Koukouvinis, Manolis Gavaises
Publié dans: International Journal of Multiphase Flow, Numéro 93, 2017, Page(s) 158-177, ISSN 0301-9322
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.ijmultiphaseflow.2017.04.004

Numerical and Experimental Investigation of Hydrodynamic Mechanisms in Erosive Sheet Cavitation

Auteurs: Arabnejad Khanouki, Mohammad Hossein
Publié dans: Numéro 7, 2018
Éditeur: Chalmers University of Technology

A Realizable Hybrid Mixture-Bubble Model for Cavitating Flows

Auteurs: Ghahramani, Ebrahim
Publié dans: Numéro 8, 2018
Éditeur: Chalmers University of Technology

Recherche de données OpenAIRE...

Livrables

Publications

Partager cette page

Télécharger