Deliverables
Experimental measurements of main combustion products and pollutant emissions will be collected in laminar flames (burning natural gas), submitted to controlled flow or acoustic pulsations.
Analysis of chemical and physical mechanisms leading to the formation of NOx in flames burning natural gasThe chemical and physical mechanisms leading to the formation of nitrogen oxides (NOx) and carbonaceous particles (soot) in laminar coflow flames will be investigated and analyzed on a numerical basis. For this purpose, the numerical code released as deliverable D3.1 will be adopted, in conjunction with the detailed kinetic mechanisms released as deliverable D1.1-D1.3. The comparison with the experimental data available from WP6 will be exploited.
"RANS of ""flameless burners""""RANS simulations of industrial burners operating in ""flameless"" conditions will be carried out, with the aim to investigate the ability of numerical simulations to predict important combustion features (such as flame stabilization, pollutant emissions, etc.) in highly diluted combustion regimes."
Experimental data for validation purposes: Rig AExperimental data will be collected for turbulent flames with different geometry of injectors and different fuels.
Optimization of finite-rate chemistry turbulent combustion models for RANS and LES simulationsFinite-rate chemistry turbulent combustion models for RANS and LES simulations will be optimized for their application to high diluted streams.
Detailed kinetic sub-mechanism of NOx Detailed kinetic sub-mechanism of NOx from natural gas combustionA detailed kinetic sub-mechanism describing the chemistry of nitrogen oxides (NOx) to be coupled to the mechanism developed in D1.1 will be provided, together with thermodynamic data and transport properties for all the involved chemical species.
Reduced kinetic mechanism for natural gas combustion in non-conventional conditionsThe reduced kinetic mechanism released as deliverable D2.1 will be further optimized, in order to improve its predictive capabilities especially in non-conventional conditions (e.g flameless or MILD conditions), by comparing its performances with experimental data available in the scientific literature (ignition delay times, ideal reactors, laminar flame speeds, etc.). The reduced kinetic mechanism will be adopted for performing CFD simulations of large-scale (industrial) geometries (WP8).
Experimental data for validation purposes: Rig CExperimental data will be collected for turbulent flames running at different thermal efficiencies.
Progress ReportThe progress report will present the status of the advancement of the project.
Final reportThe final report will summarize the research activities carried out by the four partners during the whole length of the Project and the main results achieved.
Validation of the combustion models using small-scale and semi-industrial scale experimental dataThe improved combustion models released as deliverable D4.2 and D4.3 will be validated (and further improved if necessary) with respect to experimental data corresponding to small-scale turbulent flames (Adelaide- and Delft-JHC burners and Cabra flame) and semi-industrial devices (obtained under the International Flame research Foundation (IFRF) Research Programme on MILD combustion.
Administrative Agreement to establish a Joint DoctorateAdministrative agreement to establish a Joint Doctorate between the network's partners.
Reduced kinetic mechanism for natural gas combustionA reduced kinetic mechanism describing the combustion of natural gas will be provided, together with thermodynamic data and transport properties of all the involved chemical species. The reduction will be applied to the detailed kinetic mechanism developed in work-package WP1 and released as deliverable D1.1.
Extension of flamelet/progress variable models for multiple and highly diluted streamsThe turbulent combustion models based on the flamelet/progress variable approach will be extended and optimized to multiple and highly diluted streams, in order to improve their predictive capabilities for flameless or MILD combustion.
LES of conventional swirling turbulent flamesLarge Eddy Simulations (LES) of conventional swirling turbulent flames typically encountered in gas turbines and industrial furnaces will be carried out, with the aim to asses the ability of numerical simulations to predict complex dynamic behaviors of flames and formation of pollutant species.
LES of industrial devices burning natural gas in conventional and flameless conditionsLarge Eddy Simulations (LES) of large-scale (industrial and/or semi-industrial) devices burning natural gas will be carried out.
Validation of the Combustion LES modeling tool using experimental from the ConsortiumThe extended Combustion LES modeling tool will be tested and validate with respect to the experimental data available from WP7, in order to provide guidelines for using LES in turbulent combustion of large-scale combustion systems (to be studied in WP8).
Reduced kinetic mechanism for natural gas combustion with pollutant formationA final version of the reduced kinetic mechanism for natural gas, together with NOx and soot sub-mechanisms, validated on well-characterized laboratory-scale systems will be finally released. This final version will include possible improvements with respect to deliverable D2.2, resulting from the validation process.
Draft Periodic ReportDraft periodic report in order to prepare the mid-term meeting.
Detailed kinetic sub-mechanism of aromatic species and soot Detailed kinetic sub-mechanism of NOx from natural gas combustionA detailed kinetic sub-mechanism describing the chemistry of carbonaceous particles (soot) to be coupled to the mechanisms developed in D1.1 and D1.2 will be provided, together with thermodynamic data and transport properties for all the involved chemical species.
Experimental measurements in steady-state laminar flamesExperimental measurements of main combustion products and pollutatnt emissions will be collected in steady-state laminar flames burning natural gas.
Supervisory BoardDefinition of the Supervisory Board of the network.
Integration of additional effects into the Combustion LES modeling toolImproved LES combustion models will be developed and released, with additional computational features to face typical modeling issues pertinent to the accurate predictions of real combustion systems.
Assessment of Combustion LES modeling toolComparative study of different existing LES combustion models (such as filtered and propagation based flamelet models and various finite rate chemistry models) on a couple of selected combustion test cases, corresponding to the ORACLES rig developed under the FP6 project MOLECULES and the low-swirl stabilized premixed flame of Cheng type.
Detailed kinetic mechanism of natural gas combustion and oxidationA detailed kinetic mechanism describing the combustion of natural gas will be provided, together with thermodynamic data and transport properties for all the involved chemical species.
A priori evaluation of turbulent combustion closures using DNS simulations"Typical turbulent combustion closure model will be assessed and analyzed in ""a priori"" approach using DNS simulations. The strengths and weakness of present turbulent combustion models will be compared, especially in terms of applicability to combustion of natural gas in non-conventional conditions (e.g. flameless or MILD conditions)."
Experimental data for validation purposes: Rig BExperimental data will be collected for turbulent flames operating at different pressure ratios.
A numerical code for the CFD simulation of multi-dimensional laminar flames will be released. The code will be specifically conceived to manage detailed kinetic mechanisms with hundreds of species and thousands of reactions.
Mid-term review meetingDuring the mid-term meeting the partners will analyze the status of the Project and will update the activities for the last two years of the Project.
Publications
Author(s):
M. Gatti, R. Gaudron, C. Mirat, T. Schuller
Published in:
Volume 4A: Combustion, Fuels and Emissions, Issue GT2017-63874, 2017, Page(s) V04AT04A054, ISBN 978-0-7918-5084-8
Publisher:
ASME
DOI:
10.1115/GT2017-63874
Author(s):
Lorella Palluotto, Nicolas Dumont, Pedro Rodrigues, Chai Koren, Ronan Vicquelin, Olivier Gicquel
Published in:
Volume 5A: Heat Transfer, 2017, Page(s) V05AT20A004, ISBN 978-0-7918-5087-9
Publisher:
ASME
DOI:
10.1115/GT2017-64179
Author(s):
M. Fürst, A. Cuoci, A. Frassoldati, A. Parente
Published in:
37th International Symposium on Combustion, 2018
Publisher:
The Combustion Institute
Author(s):
M. Furst, a. Parente
Published in:
25th Journées d’etude Belgian Section of the Combustion Institute, Issue 15-16/5/2018, 2018
Publisher:
The Combustion Institute
Author(s):
Aversano, Gianmarco; Bellemans, Aurélie; Li, Zhiyi; Coussement, Axel; Gicquel, Olivier; Parente, Alessandro
Published in:
14th INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN SCIENCES AND ENGINEERING, Issue 14-18 March 2018, 2018
Publisher:
AIP
Author(s):
Agizza Maria Angela; Bürkle S.; Becker L.; Greifenstein M.; Doost S.; Janicka J.; Wagner S.; Dreizler Andreas; Faravelli Tiziano; Bagheri Ghobad
Published in:
Digital proceedings of the 8th European Combustion Meeting, Issue 18-21 April 2017, 2017
Publisher:
European Combustion
DOI:
10.5281/zenodo.1473522
Author(s):
W. Pejpichestakul, A. Frassoldati, T. Faravelli
Published in:
XXXIX Meeting of the Italian Section of the Combustion Institute, Issue 4-6 July 2016, 2016
Publisher:
The Italian Section of the Combustion Institute
DOI:
10.5281/zenodo.582606
Author(s):
M. Fürst, A. Cuoci and A. Parente
Published in:
24th Journées d’Etude of the Belgian Section of the Combustion Institute, Issue 19-20 May, 2016
Publisher:
The Belgian Section of the Combustion Institute
DOI:
10.5281/zenodo.583248
Author(s):
G. Bagheri, T. Faravelli, A. Frassoldati
Published in:
Abstract book of: Analysis, uncertainty quantification, validation, optimization and reduction of detailed combustion mechanism for practical use of Smart Energy Carriers Training School., Issue 4-7 July, 2016, 2016
Publisher:
COST project CM1404
DOI:
10.5281/zenodo.2637786
Author(s):
A. Bodor, B. Franzelli, A. Cuoci, A. Stagni, M. Roussillo
Published in:
2017 SIAM International Conference on Numerical Combustion, Issue 3-5 April 2017, 2017
Publisher:
SIAM
DOI:
10.5281/zenodo.583388
Author(s):
G. Aversano, M. Fürst, Z. Li, R. Malik and A. Parente
Published in:
Deuxième Journée scientifique du Pôle hainuyer, Issue 19 April 2016, 2016
Publisher:
Pôle hainuyer
DOI:
10.5281/zenodo.583423
Author(s):
Z. Li, A. Parente
Published in:
Winter School on Combustion, Issue 25-28 January 2016, 2016
Publisher:
ICISS
DOI:
10.5281/zenodo.583291
Author(s):
Z. Li, A. Cuoci, A. Parente
Published in:
24th Journées d’Etude of the Belgian Section of the Combustion Institute, Issue 19-20 May 2016, 2016
Publisher:
Belgian Section of the Combustion Institute
DOI:
10.5281/zenodo.583297
Author(s):
M. Fürst, A. Parente, A. Cuoci
Published in:
COST Training School on the Analysis of Combustion Mechanisms, Issue 4-7 July 2016, 2016
Publisher:
COST Training School on the Analysis of Combustion Mechanisms
DOI:
10.5281/zenodo.2637755
Author(s):
M. Fürst and A. Parente
Published in:
Winter School on Combustion, Issue 25-28 January 2016, 2016
Publisher:
ICISS
DOI:
10.5281/zenodo.583272
Author(s):
Z. Li, A. Cuoci, A. Sadiki, A. Parente
Published in:
SIAM Sixteenth International Conference on Numerical Combustion, Issue 3-5 April 2017, 2017
Publisher:
SIAM
DOI:
10.5281/zenodo.583420
Author(s):
G. Aversano, A. Parente,
Published in:
Winter School on Combustion, Issue 25-28 January 2016, 2016
Publisher:
ICISS
DOI:
10.5281/zenodo.583294
Author(s):
A. Shamooni, A. Cuoci, T. Faravelli
Published in:
XXXIX Meeting of the Italian Section of the Combustion Institute, Issue July 4-6, 2016, 2016
Publisher:
Italian Section of the Combustion Institute
DOI:
10.5281/zenodo.583289
Author(s):
Z. Li, M.R. Malik, A. Cuoci, A. Parente
Published in:
14th international conference of numerical analysis and applied mathematics, Issue 19-25 September 2016, 2016
Publisher:
ICNAAM
DOI:
10.5281/zenodo.583421
Author(s):
M. Fürst and A. Parente
Published in:
2nd General Meeting and 2nd Workshop on Smart Energy Carriers in Industry, Issue 14-16 November 2016, 2016
Publisher:
COST
DOI:
10.5281/zenodo.583259
Author(s):
A. Bodor, B. Franzelli, A. Cuoci
Published in:
8th European Combustion Meeting, Issue April 18-21, 2017, 2017
Publisher:
European section of the Combustion Institute
DOI:
10.5281/zenodo.582526
Author(s):
M. Fürst, A. Frassoldati and A. Parente
Published in:
SIAM Sixteenth International Conference on Numerical Combustion, Issue 3-5 April 2017, 2017
Publisher:
SIAM
DOI:
10.5281/zenodo.583264
Author(s):
A. Bodor, B. Franzelli, A. Cuoci
Published in:
XXXIX Meeting of the Italian Section of the Combustion Institute, Issue 4-6 July 2016, 2016
Publisher:
Italian Section of the Combustion Institute
DOI:
10.5281/zenodo.583273
Author(s):
G. Aversano, O. Gicquel, A. Parente
Published in:
SIAM Sixteenth International Conference on Numerical Combustion, 2017
Publisher:
3-5 April 2017
DOI:
10.5281/zenodo.583399
Author(s):
G. Aversano, A. Parente
Published in:
2nd General Meeting and 2nd Workshop on Smart Energy Carriers in Industry, Issue 14-16 November 2016, 2016
Publisher:
COST
DOI:
10.5281/zenodo.583440
Author(s):
Giampaolo Maio, Mélody Cailler, Benoît Fiorina, Renaud Mercier, Vincent Moureau
Published in:
55th AIAA Aerospace Sciences Meeting, 2017, ISBN 978-1-62410-447-3
Publisher:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2017-1471
Author(s):
G. Aversano, A. Parente,
Published in:
24th Journées d’Etude of the Belgian Section of the Combustion Institute, Issue 19-20 May 2016, 2016
Publisher:
Belgian Section of the Combustion Institute
DOI:
10.5281/zenodo.583298
Author(s):
R. Mahmoud, A.S. Doost, F. Ries, S. Burkle, A. Sadiki, J. Janicka
Published in:
Int. Congress of Materials and Energy, Issue 17.-19. 12, 2016, 2016
Publisher:
CIMATEN
DOI:
10.5281/zenodo.582615
Author(s):
R. Gaudron, M. Gatti, C. Mirat, T. Schuller
Published in:
Volume 4B: Combustion, Fuels, and Emissions, 2018, Page(s) V04BT04A021, ISBN 978-0-7918-5106-7
Publisher:
ASME
DOI:
10.1115/GT2018-76381
Author(s):
M. Gatti, R. Gaudron, C. Mirat, L. Zimmer, T. Schuller
Published in:
Volume 4B: Combustion, Fuels, and Emissions, 2018, Page(s) V04BT04A003, ISBN 978-0-7918-5106-7
Publisher:
ASME
DOI:
10.1115/gt2018-76105
Author(s):
Gatti , M.; Gaudron , R; Mirat , Clément; Schuller , T.
Published in:
https://hal.archives-ouvertes.fr/hal-01877594, Issue 2, 2017
Publisher:
8th European Combustion Meeting 2017
Author(s):
R. Gaudron, M. Gatti, C. Mirat, T. Schuller
Published in:
Volume 4A: Combustion, Fuels and Emissions, 2017, ISBN 978-0-7918-5084-8
Publisher:
American Society of Mechanical Engineers
DOI:
10.1115/gt2017-64231
Author(s):
Zhiyi Li, Alberto Cuoci, Amsini Sadiki, Alessandro Parente
Published in:
Energy, Issue 139, 2017, Page(s) 555-570, ISSN 0360-5442
Publisher:
Pergamon Press Ltd.
DOI:
10.1016/j.energy.2017.07.132
Author(s):
Warumporn Pejpichestakul, Alessio Frassoldati, Alessandro Parente, Tiziano Faravelli
Published in:
Fuel, Issue 234, 2018, Page(s) 199-206, ISSN 0016-2361
Publisher:
Elsevier BV
DOI:
10.1016/j.fuel.2018.07.022
Author(s):
Ghobad Bagheri, Marco Lubrano Lavadera, Eliseo Ranzi, Matteo Pelucchi, Pino Sabia, Mariarosaria de Joannon, Alessandro Parente, Tiziano Faravelli
Published in:
Combustion Science and Technology, 2018, Page(s) 1-13, ISSN 0010-2202
Publisher:
Taylor & Francis
DOI:
10.1080/00102202.2018.1452411
Author(s):
Warumporn Pejpichestakul, Eliseo Ranzi, Matteo Pelucchi, Alessio Frassoldati, Alberto Cuoci, Alessandro Parente, Tiziano Faravelli
Published in:
Proceedings of the Combustion Institute, 2018, ISSN 1540-7489
Publisher:
Combustion Institute
DOI:
10.1016/j.proci.2018.06.104
Author(s):
Ali Shamooni, Alberto Cuoci, Tiziano Faravelli, Amsini Sadiki
Published in:
Energies, Issue 11/9, 2018, Page(s) 2464, ISSN 1996-1073
Publisher:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/en11092464
Author(s):
Zhiyi Li, Michał T. Lewandowski, Francesco Contino, Alessandro Parente
Published in:
Energy & Fuels, Issue 32/10, 2018, Page(s) 10121-10131, ISSN 0887-0624
Publisher:
American Chemical Society
DOI:
10.1021/acs.energyfuels.8b01001
Author(s):
Magnus Fürst, Pino Sabia, Marco Lubrano Lavadera, Gianmarco Aversano, Mara de Joannon, Alessio Frassoldati, Alessandro Parente
Published in:
Energy & Fuels, Issue 32/10, 2018, Page(s) 10194-10201, ISSN 0887-0624
Publisher:
American Chemical Society
DOI:
10.1021/acs.energyfuels.8b01022
Author(s):
Gianmarco Aversano, Aurélie Bellemans, Zhiyi Li, Axel Coussement, Olivier Gicquel, Alessandro Parente
Published in:
Computers & Chemical Engineering, Issue 121, 2019, Page(s) 422-441, ISSN 0098-1354
Publisher:
Pergamon Press Ltd.
DOI:
10.1016/j.compchemeng.2018.09.022
Author(s):
Zhiyi Li, Marco Ferrarotti, Alberto Cuoci, Alessandro Parente
Published in:
Applied Energy, Issue 225, 2018, Page(s) 637-655, ISSN 0306-2619
Publisher:
Pergamon Press Ltd.
DOI:
10.1016/j.apenergy.2018.04.085
Author(s):
Gianmarco Aversano, John Camilo Parra-Alvarez, Benjamin J. Isaac, Sean T. Smith, Axel Coussement, Olivier Gicquel, Alessandro Parente
Published in:
Proceedings of the Combustion Institute, 2018, ISSN 1540-7489
Publisher:
Combustion Institute
DOI:
10.1016/j.proci.2018.07.040
Author(s):
Marco Ferrarotti, Zhiyi Li, Alessandro Parente
Published in:
Proceedings of the Combustion Institute, 2018, ISSN 1540-7489
Publisher:
Combustion Institute
DOI:
10.1016/j.proci.2018.07.043
Author(s):
Warumporn Pejpichestakul, Alessio Frassoldati, Alessandro Parente, Tiziano Faravelli
Published in:
Combustion Science and Technology, 2018, Page(s) 1-11, ISSN 0010-2202
Publisher:
Taylor & Francis
DOI:
10.1080/00102202.2018.1540472
Author(s):
Zhiyi Li, Alberto Cuoci, Alessandro Parente
Published in:
Proceedings of the Combustion Institute, 2018, ISSN 1540-7489
Publisher:
Combustion Institute
DOI:
10.1016/j.proci.2018.09.033
Author(s):
Zhiyi Li, Alberto Cuoci, Amsini Sadiki, Alessandro Parente
Published in:
Energy Procedia, Issue 142, 2017, Page(s) 1570-1576, ISSN 1876-6102
Publisher:
Pergamon Press Ltd.
DOI:
10.1016/j.egypro.2017.12.608
Author(s):
R. Gaudron, M. Gatti, C. Mirat, T. Schuller
Published in:
Journal of Engineering for Gas Turbines and Power, Issue 141/5, 2019, Page(s) 051016, ISSN 0742-4795
Publisher:
American Society of Mechanical Engineers
DOI:
10.1115/1.4041000
Author(s):
Malte Merk, Camilo Silva, Wolfgang Polifke, Renaud Gaudron, Marco Gatti, Clément Mirat, Thierry Schuller
Published in:
Journal of Engineering for Gas Turbines and Power, Issue 141/2, 2019, Page(s) 021035, ISSN 0742-4795
Publisher:
American Society of Mechanical Engineers
DOI:
10.1115/1.4040731
Author(s):
Warumporn Pejpichestakul, Alberto Cuoci, Alessio Frassoldati, Matteo Pelucchi, Alessandro Parente, Tiziano Faravelli
Published in:
Combustion and Flame, Issue 205, 2019, Page(s) 135-146, ISSN 0010-2180
Publisher:
Elsevier BV
DOI:
10.1016/j.combustflame.2019.04.001
Author(s):
M. Gatti, R. Gaudron, C. Mirat, L. Zimmer, T. Schuller
Published in:
Proceedings of the Combustion Institute, Issue 37/4, 2019, Page(s) 5197-5204, ISSN 1540-7489
Publisher:
Combustion Institute
DOI:
10.1016/j.proci.2018.06.148
Author(s):
Ghobad Bagheri, Eliseo Ranzi, Matteo Pelucchi, Alessandro Parente, Alessio Frassoldati, Tiziano Faravelli
Published in:
Combustion and Flame, Issue 212, 2020, Page(s) 142-155, ISSN 0010-2180
Publisher:
Elsevier BV
DOI:
10.1016/j.combustflame.2019.10.014
Author(s):
M. Merk, R. Gaudron, C. Silva, M. Gatti, C. Mirat, T. Schuller, W. Polifke
Published in:
Proceedings of the Combustion Institute, Issue 37/4, 2019, Page(s) 5263-5270, ISSN 1540-7489
Publisher:
Combustion Institute
DOI:
10.1016/j.proci.2018.05.124
Author(s):
R. Gaudron, M. Gatti, C. Mirat, T. Schuller
Published in:
Combustion and Flame, Issue 179, 2017, Page(s) 138-153, ISSN 0010-2180
Publisher:
Elsevier BV
DOI:
10.1016/j.combustflame.2017.01.022
Author(s):
Agnes Livia Bodor, Benedetta Franzelli, Tiziano Faravelli, Alberto Cuoci
Published in:
Combustion and Flame, Issue 208, 2019, Page(s) 122-138, ISSN 0010-2180
Publisher:
Elsevier BV
DOI:
10.1016/j.combustflame.2019.06.008
Author(s):
Sebastian Bürkle, Lukas G. Becker, Maria Angela Agizza, Andreas Dreizler, Volker Ebert, Steven Wagner
Published in:
Experiments in Fluids, Issue 58/7, 2017, ISSN 0723-4864
Publisher:
Springer Verlag
DOI:
10.1007/s00348-017-2366-2
Author(s):
Giampaolo Maio, Renaud Mercier, Mélody Cailler and Benoît Fiorina
Published in:
8th EUROPEAN COMBUSTION MEETING, Issue 18-21 April 2017, 2017
Publisher:
Adria Combustion Institute
DOI:
10.5281/zenodo.583445
Searching for OpenAIRE data...
There was an error trying to search data from OpenAIRE
No results available