Combustion for Low Emission Applications of Natural Gas

Resultado final

Experimental measurements in unsteady laminar flames

Experimental measurements of main combustion products and pollutant emissions will be collected in laminar flames (burning natural gas), submitted to controlled flow or acoustic pulsations.

Analysis of chemical and physical mechanisms leading to the formation of NOx in flames burning natural gas

The chemical and physical mechanisms leading to the formation of nitrogen oxides (NOx) and carbonaceous particles (soot) in laminar coflow flames will be investigated and analyzed on a numerical basis. For this purpose, the numerical code released as deliverable D3.1 will be adopted, in conjunction with the detailed kinetic mechanisms released as deliverable D1.1-D1.3. The comparison with the experimental data available from WP6 will be exploited.

"RANS of ""flameless burners"""

"RANS simulations of industrial burners operating in ""flameless"" conditions will be carried out, with the aim to investigate the ability of numerical simulations to predict important combustion features (such as flame stabilization, pollutant emissions, etc.) in highly diluted combustion regimes."

Experimental data for validation purposes: Rig A

Experimental data will be collected for turbulent flames with different geometry of injectors and different fuels.

Optimization of finite-rate chemistry turbulent combustion models for RANS and LES simulations

Finite-rate chemistry turbulent combustion models for RANS and LES simulations will be optimized for their application to high diluted streams.

Detailed kinetic sub-mechanism of NOx Detailed kinetic sub-mechanism of NOx from natural gas combustion

A detailed kinetic sub-mechanism describing the chemistry of nitrogen oxides (NOx) to be coupled to the mechanism developed in D1.1 will be provided, together with thermodynamic data and transport properties for all the involved chemical species.

Reduced kinetic mechanism for natural gas combustion in non-conventional conditions

The reduced kinetic mechanism released as deliverable D2.1 will be further optimized, in order to improve its predictive capabilities especially in non-conventional conditions (e.g flameless or MILD conditions), by comparing its performances with experimental data available in the scientific literature (ignition delay times, ideal reactors, laminar flame speeds, etc.). The reduced kinetic mechanism will be adopted for performing CFD simulations of large-scale (industrial) geometries (WP8).

Experimental data for validation purposes: Rig C

Experimental data will be collected for turbulent flames running at different thermal efficiencies.

Progress Report

The progress report will present the status of the advancement of the project.

Final report

The final report will summarize the research activities carried out by the four partners during the whole length of the Project and the main results achieved.

Validation of the combustion models using small-scale and semi-industrial scale experimental data

The improved combustion models released as deliverable D4.2 and D4.3 will be validated (and further improved if necessary) with respect to experimental data corresponding to small-scale turbulent flames (Adelaide- and Delft-JHC burners and Cabra flame) and semi-industrial devices (obtained under the International Flame research Foundation (IFRF) Research Programme on MILD combustion.

Administrative Agreement to establish a Joint Doctorate

Administrative agreement to establish a Joint Doctorate between the network's partners.

Reduced kinetic mechanism for natural gas combustion

A reduced kinetic mechanism describing the combustion of natural gas will be provided, together with thermodynamic data and transport properties of all the involved chemical species. The reduction will be applied to the detailed kinetic mechanism developed in work-package WP1 and released as deliverable D1.1.

Extension of flamelet/progress variable models for multiple and highly diluted streams

The turbulent combustion models based on the flamelet/progress variable approach will be extended and optimized to multiple and highly diluted streams, in order to improve their predictive capabilities for flameless or MILD combustion.

LES of conventional swirling turbulent flames

Large Eddy Simulations (LES) of conventional swirling turbulent flames typically encountered in gas turbines and industrial furnaces will be carried out, with the aim to asses the ability of numerical simulations to predict complex dynamic behaviors of flames and formation of pollutant species.

LES of industrial devices burning natural gas in conventional and flameless conditions

Large Eddy Simulations (LES) of large-scale (industrial and/or semi-industrial) devices burning natural gas will be carried out.

Validation of the Combustion LES modeling tool using experimental from the Consortium

The extended Combustion LES modeling tool will be tested and validate with respect to the experimental data available from WP7, in order to provide guidelines for using LES in turbulent combustion of large-scale combustion systems (to be studied in WP8).

Reduced kinetic mechanism for natural gas combustion with pollutant formation

A final version of the reduced kinetic mechanism for natural gas, together with NOx and soot sub-mechanisms, validated on well-characterized laboratory-scale systems will be finally released. This final version will include possible improvements with respect to deliverable D2.2, resulting from the validation process.

Draft Periodic Report

Draft periodic report in order to prepare the mid-term meeting.

Detailed kinetic sub-mechanism of aromatic species and soot Detailed kinetic sub-mechanism of NOx from natural gas combustion

A detailed kinetic sub-mechanism describing the chemistry of carbonaceous particles (soot) to be coupled to the mechanisms developed in D1.1 and D1.2 will be provided, together with thermodynamic data and transport properties for all the involved chemical species.

Experimental measurements in steady-state laminar flames

Experimental measurements of main combustion products and pollutatnt emissions will be collected in steady-state laminar flames burning natural gas.

Supervisory Board

Definition of the Supervisory Board of the network.

Integration of additional effects into the Combustion LES modeling tool

Improved LES combustion models will be developed and released, with additional computational features to face typical modeling issues pertinent to the accurate predictions of real combustion systems.

Assessment of Combustion LES modeling tool

Comparative study of different existing LES combustion models (such as filtered and propagation based flamelet models and various finite rate chemistry models) on a couple of selected combustion test cases, corresponding to the ORACLES rig developed under the FP6 project MOLECULES and the low-swirl stabilized premixed flame of Cheng type.

Detailed kinetic mechanism of natural gas combustion and oxidation

A detailed kinetic mechanism describing the combustion of natural gas will be provided, together with thermodynamic data and transport properties for all the involved chemical species.

A priori evaluation of turbulent combustion closures using DNS simulations

"Typical turbulent combustion closure model will be assessed and analyzed in ""a priori"" approach using DNS simulations. The strengths and weakness of present turbulent combustion models will be compared, especially in terms of applicability to combustion of natural gas in non-conventional conditions (e.g. flameless or MILD conditions)."

Experimental data for validation purposes: Rig B

Experimental data will be collected for turbulent flames operating at different pressure ratios.

Numerical code for multi-dimensional laminar flames with detailed kinetics

A numerical code for the CFD simulation of multi-dimensional laminar flames will be released. The code will be specifically conceived to manage detailed kinetic mechanisms with hundreds of species and thousands of reactions.

Mid-term review meeting

During the mid-term meeting the partners will analyze the status of the Project and will update the activities for the last two years of the Project.

Publicaciones

Effects of the Injector Design on the Transfer Function of Premixed Swirling Flames

Autores: M. Gatti, R. Gaudron, C. Mirat, T. Schuller
Publicado en: Volume 4A: Combustion, Fuels and Emissions, Edición GT2017-63874, 2017, Página(s) V04AT04A054, ISBN 978-0-7918-5084-8
Editor: ASME
DOI: 10.1115/GT2017-63874

Comparison of Monte Carlo Methods Efficiency to Solve Radiative Energy Transfer in High Fidelity Unsteady 3D Simulations

Autores: Lorella Palluotto, Nicolas Dumont, Pedro Rodrigues, Chai Koren, Ronan Vicquelin, Olivier Gicquel
Publicado en: Volume 5A: Heat Transfer, 2017, Página(s) V05AT20A004, ISBN 978-0-7918-5087-9
Editor: ASME
DOI: 10.1115/GT2017-64179

Development of a coupling between OpenSMOKE++ and Dakota for Optimization of chemical kinetics

Autores: M. Fürst, A. Cuoci, A. Frassoldati, A. Parente
Publicado en: 37th International Symposium on Combustion, 2018
Editor: The Combustion Institute

THE OPTIMIZATION OF CHEMICAL KINETICS WITH RESPECT TO MILD COMBUSTION

Autores: M. Furst, a. Parente
Publicado en: 25th Journées d’etude Belgian Section of the Combustion Institute, Edición 15-16/5/2018, 2018
Editor: The Combustion Institute

Model Reduction by PCA and Kriging

Autores: Aversano, Gianmarco; Bellemans, Aurélie; Li, Zhiyi; Coussement, Axel; Gicquel, Olivier; Parente, Alessandro
Publicado en: 14th INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN SCIENCES AND ENGINEERING, Edición 14-18 March 2018, 2018
Editor: AIP

Reactor network modelling of a close to reality combustor using residence time measurements

Autores: Agizza Maria Angela; Bürkle S.; Becker L.; Greifenstein M.; Doost S.; Janicka J.; Wagner S.; Dreizler Andreas; Faravelli Tiziano; Bagheri Ghobad
Publicado en: Digital proceedings of the 8th European Combustion Meeting, Edición 18-21 April 2017, 2017
Editor: European Combustion
DOI: 10.5281/zenodo.1473522

Detailed kinetic modeling of soot formation

Autores: W. Pejpichestakul, A. Frassoldati, T. Faravelli
Publicado en: XXXIX Meeting of the Italian Section of the Combustion Institute, Edición 4-6 July 2016, 2016
Editor: The Italian Section of the Combustion Institute
DOI: 10.5281/zenodo.582606

“Uncertainty quantification of chemical kinetics for Moderate or Low-oxygen Dilution (MILD) combustion”

Autores: M. Fürst, A. Cuoci and A. Parente
Publicado en: 24th Journées d’Etude of the Belgian Section of the Combustion Institute, Edición 19-20 May, 2016
Editor: The Belgian Section of the Combustion Institute
DOI: 10.5281/zenodo.583248

Detailed Kinetic Mechanisms for Combustion and Oxidation of Natural Gas.

Autores: G. Bagheri, T. Faravelli, A. Frassoldati
Publicado en: Abstract book of: Analysis, uncertainty quantification, validation, optimization and reduction of detailed combustion mechanism for practical use of Smart Energy Carriers Training School., Edición 4-7 July, 2016, 2016
Editor: COST project CM1404
DOI: 10.5281/zenodo.2637786

Impact of Reduction of Chemistry on Soot Formation and Evolution in Laminar Flames

Autores: A. Bodor, B. Franzelli, A. Cuoci, A. Stagni, M. Roussillo
Publicado en: 2017 SIAM International Conference on Numerical Combustion, Edición 3-5 April 2017, 2017
Editor: SIAM
DOI: 10.5281/zenodo.583388

Numerical simulation of novel combustion technologies

Autores: G. Aversano, M. Fürst, Z. Li, R. Malik and A. Parente
Publicado en: Deuxième Journée scientifique du Pôle hainuyer, Edición 19 April 2016, 2016
Editor: Pôle hainuyer
DOI: 10.5281/zenodo.583423

Sub-grid models for LES simulation of non-conventional combustion regimes

Autores: Z. Li, A. Parente
Publicado en: Winter School on Combustion, Edición 25-28 January 2016, 2016
Editor: ICISS
DOI: 10.5281/zenodo.583291

Numerical Simulation of MILD combustion with adaptive finite rate chemistry

Autores: Z. Li, A. Cuoci, A. Parente
Publicado en: 24th Journées d’Etude of the Belgian Section of the Combustion Institute, Edición 19-20 May 2016, 2016
Editor: Belgian Section of the Combustion Institute
DOI: 10.5281/zenodo.583297

Uncertainty Quantification of chemical kinetics for non-conventional combustion regimes

Autores: M. Fürst, A. Parente, A. Cuoci
Publicado en: COST Training School on the Analysis of Combustion Mechanisms, Edición 4-7 July 2016, 2016
Editor: COST Training School on the Analysis of Combustion Mechanisms
DOI: 10.5281/zenodo.2637755

Optimization of kinetic mechanisms for non-conventional combustion regimes

Autores: M. Fürst and A. Parente
Publicado en: Winter School on Combustion, Edición 25-28 January 2016, 2016
Editor: ICISS
DOI: 10.5281/zenodo.583272

Large Eddy Simulation of Non-Conventional Combustion Regime with Reduced Detailed Chemistry

Autores: Z. Li, A. Cuoci, A. Sadiki, A. Parente
Publicado en: SIAM Sixteenth International Conference on Numerical Combustion, Edición 3-5 April 2017, 2017
Editor: SIAM
DOI: 10.5281/zenodo.583420

POD-reduced models & Kriging interpolation for parameter exploration

Autores: G. Aversano, A. Parente,
Publicado en: Winter School on Combustion, Edición 25-28 January 2016, 2016
Editor: ICISS
DOI: 10.5281/zenodo.583294

Large eddy simulation of non-premixed combustion with detailed chemistry

Autores: A. Shamooni, A. Cuoci, T. Faravelli
Publicado en: XXXIX Meeting of the Italian Section of the Combustion Institute, Edición July 4-6, 2016, 2016
Editor: Italian Section of the Combustion Institute
DOI: 10.5281/zenodo.583289

edcSMOKE: A new combustion solver for stiff chemistry based on OpenFOAM®

Autores: Z. Li, M.R. Malik, A. Cuoci, A. Parente
Publicado en: 14th international conference of numerical analysis and applied mathematics, Edición 19-25 September 2016, 2016
Editor: ICNAAM
DOI: 10.5281/zenodo.583421

Uncertainty Quantification of chemical kinetics for MILD Combustion

Autores: M. Fürst and A. Parente
Publicado en: 2nd General Meeting and 2nd Workshop on Smart Energy Carriers in Industry, Edición 14-16 November 2016, 2016
Editor: COST
DOI: 10.5281/zenodo.583259

Numerical modeling of soot formation and evolution in laminar-pulsed diffusion flames through the Discrete Sectional Method

Autores: A. Bodor, B. Franzelli, A. Cuoci
Publicado en: 8th European Combustion Meeting, Edición April 18-21, 2017, 2017
Editor: European section of the Combustion Institute
DOI: 10.5281/zenodo.582526

Effect of mechanism reduction on the Uncertainty Quantification of chemical kinetics for MILD combustion

Autores: M. Fürst, A. Frassoldati and A. Parente
Publicado en: SIAM Sixteenth International Conference on Numerical Combustion, Edición 3-5 April 2017, 2017
Editor: SIAM
DOI: 10.5281/zenodo.583264

Numerical modeling of soot formation and evolution in laminar flames: the limits of the hybrid method of moments

Autores: A. Bodor, B. Franzelli, A. Cuoci
Publicado en: XXXIX Meeting of the Italian Section of the Combustion Institute, Edición 4-6 July 2016, 2016
Editor: Italian Section of the Combustion Institute
DOI: 10.5281/zenodo.583273

Surrogate Models based on the combination of PCA and Kriging

Autores: G. Aversano, O. Gicquel, A. Parente
Publicado en: SIAM Sixteenth International Conference on Numerical Combustion, 2017
Editor: 3-5 April 2017
DOI: 10.5281/zenodo.583399

PCA & Kriging for Surrogate Models

Autores: G. Aversano, A. Parente
Publicado en: 2nd General Meeting and 2nd Workshop on Smart Energy Carriers in Industry, Edición 14-16 November 2016, 2016
Editor: COST
DOI: 10.5281/zenodo.583440

LES modeling of piloted jet flames with inhomogeneous inlets using tabulated chemistry methods

Autores: Giampaolo Maio, Mélody Cailler, Benoît Fiorina, Renaud Mercier, Vincent Moureau
Publicado en: 55th AIAA Aerospace Sciences Meeting, 2017, ISBN 978-1-62410-447-3
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2017-1471

PCA & Kriging for model reduction and parameter exploration

Autores: G. Aversano, A. Parente,
Publicado en: 24th Journées d’Etude of the Belgian Section of the Combustion Institute, Edición 19-20 May 2016, 2016
Editor: Belgian Section of the Combustion Institute
DOI: 10.5281/zenodo.583298

Large Eddy Simulation of Complex Flow in Combustion Chamber and Residence Time Distribution Calculation

Autores: R. Mahmoud, A.S. Doost, F. Ries, S. Burkle, A. Sadiki, J. Janicka
Publicado en: Int. Congress of Materials and Energy, Edición 17.-19. 12, 2016, 2016
Editor: CIMATEN
DOI: 10.5281/zenodo.582615

Flame Describing Functions of a Confined Premixed Swirled Combustor With Upstream and Downstream Forcing

Autores: R. Gaudron, M. Gatti, C. Mirat, T. Schuller
Publicado en: Volume 4B: Combustion, Fuels, and Emissions, 2018, Página(s) V04BT04A021, ISBN 978-0-7918-5106-7
Editor: ASME
DOI: 10.1115/GT2018-76381

A Comparison of the Transfer Functions and Flow Fields of Flames With Increasing Swirl Number

Autores: M. Gatti, R. Gaudron, C. Mirat, L. Zimmer, T. Schuller
Publicado en: Volume 4B: Combustion, Fuels, and Emissions, 2018, Página(s) V04BT04A003, ISBN 978-0-7918-5106-7
Editor: ASME
DOI: 10.1115/gt2018-76105

Injection System Design Impact on the Stabilization and Acoustic Response of Premixed Swirling Flames

Autores: Gatti , M.; Gaudron , R; Mirat , Clément; Schuller , T.
Publicado en: https://hal.archives-ouvertes.fr/hal-01877594, Edición 2, 2017
Editor: 8th European Combustion Meeting 2017

Analysis of the Transfer Function of Large and Small Premixed Laminar Conical Flames

Autores: R. Gaudron, M. Gatti, C. Mirat, T. Schuller
Publicado en: Volume 4A: Combustion, Fuels and Emissions, 2017, ISBN 978-0-7918-5084-8
Editor: American Society of Mechanical Engineers
DOI: 10.1115/gt2017-64231

Comprehensive numerical study of the Adelaide Jet in Hot-Coflow burner by means of RANS and detailed chemistry

Autores: Zhiyi Li, Alberto Cuoci, Amsini Sadiki, Alessandro Parente
Publicado en: Energy, Edición 139, 2017, Página(s) 555-570, ISSN 0360-5442
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2017.07.132

Kinetic modeling of soot formation in premixed burner-stabilized stagnation ethylene flames at heavily sooting condition

Autores: Warumporn Pejpichestakul, Alessio Frassoldati, Alessandro Parente, Tiziano Faravelli
Publicado en: Fuel, Edición 234, 2018, Página(s) 199-206, ISSN 0016-2361
Editor: Elsevier BV
DOI: 10.1016/j.fuel.2018.07.022

Thermochemical oscillation of methane MILD combustion diluted with N 2 /CO 2 /H 2 O

Autores: Ghobad Bagheri, Marco Lubrano Lavadera, Eliseo Ranzi, Matteo Pelucchi, Pino Sabia, Mariarosaria de Joannon, Alessandro Parente, Tiziano Faravelli
Publicado en: Combustion Science and Technology, 2018, Página(s) 1-13, ISSN 0010-2202
Editor: Taylor & Francis
DOI: 10.1080/00102202.2018.1452411

Examination of a soot model in premixed laminar flames at fuel-rich conditions

Autores: Warumporn Pejpichestakul, Eliseo Ranzi, Matteo Pelucchi, Alessio Frassoldati, Alberto Cuoci, Alessandro Parente, Tiziano Faravelli
Publicado en: Proceedings of the Combustion Institute, 2018, ISSN 1540-7489
Editor: Combustion Institute
DOI: 10.1016/j.proci.2018.06.104

Prediction of Combustion and Heat Release Rates in Non-Premixed Syngas Jet Flames Using Finite-Rate Scale Similarity Based Combustion Models

Autores: Ali Shamooni, Alberto Cuoci, Tiziano Faravelli, Amsini Sadiki
Publicado en: Energies, Edición 11/9, 2018, Página(s) 2464, ISSN 1996-1073
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en11092464

Assessment of On-the-Fly Chemistry Reduction and Tabulation Approaches for the Simulation of Moderate or Intense Low-Oxygen Dilution Combustion

Autores: Zhiyi Li, Michał T. Lewandowski, Francesco Contino, Alessandro Parente
Publicado en: Energy & Fuels, Edición 32/10, 2018, Página(s) 10121-10131, ISSN 0887-0624
Editor: American Chemical Society
DOI: 10.1021/acs.energyfuels.8b01001

Optimization of Chemical Kinetics for Methane and Biomass Pyrolysis Products in Moderate or Intense Low-Oxygen Dilution Combustion

Autores: Magnus Fürst, Pino Sabia, Marco Lubrano Lavadera, Gianmarco Aversano, Mara de Joannon, Alessio Frassoldati, Alessandro Parente
Publicado en: Energy & Fuels, Edición 32/10, 2018, Página(s) 10194-10201, ISSN 0887-0624
Editor: American Chemical Society
DOI: 10.1021/acs.energyfuels.8b01022

Application of reduced-order models based on PCA & Kriging for the development of digital twins of reacting flow applications

Autores: Gianmarco Aversano, Aurélie Bellemans, Zhiyi Li, Axel Coussement, Olivier Gicquel, Alessandro Parente
Publicado en: Computers & Chemical Engineering, Edición 121, 2019, Página(s) 422-441, ISSN 0098-1354
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compchemeng.2018.09.022

Finite-rate chemistry modelling of non-conventional combustion regimes using a Partially-Stirred Reactor closure: Combustion model formulation and implementation details

Autores: Zhiyi Li, Marco Ferrarotti, Alberto Cuoci, Alessandro Parente
Publicado en: Applied Energy, Edición 225, 2018, Página(s) 637-655, ISSN 0306-2619
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.apenergy.2018.04.085

PCA and Kriging for the efficient exploration of consistency regions in Uncertainty Quantification

Autores: Gianmarco Aversano, John Camilo Parra-Alvarez, Benjamin J. Isaac, Sean T. Smith, Axel Coussement, Olivier Gicquel, Alessandro Parente
Publicado en: Proceedings of the Combustion Institute, 2018, ISSN 1540-7489
Editor: Combustion Institute
DOI: 10.1016/j.proci.2018.07.040

On the role of mixing models in the simulation of MILD combustion using finite-rate chemistry combustion models

Autores: Marco Ferrarotti, Zhiyi Li, Alessandro Parente
Publicado en: Proceedings of the Combustion Institute, 2018, ISSN 1540-7489
Editor: Combustion Institute
DOI: 10.1016/j.proci.2018.07.043

Soot Modeling of Ethylene Counterflow Diffusion Flames

Autores: Warumporn Pejpichestakul, Alessio Frassoldati, Alessandro Parente, Tiziano Faravelli
Publicado en: Combustion Science and Technology, 2018, Página(s) 1-11, ISSN 0010-2202
Editor: Taylor & Francis
DOI: 10.1080/00102202.2018.1540472

Large Eddy Simulation of MILD combustion using finite rate chemistry: Effect of combustion sub-grid closure

Autores: Zhiyi Li, Alberto Cuoci, Alessandro Parente
Publicado en: Proceedings of the Combustion Institute, 2018, ISSN 1540-7489
Editor: Combustion Institute
DOI: 10.1016/j.proci.2018.09.033

Finite-rate chemistry modelling of non-conventional combustion regimes

Autores: Zhiyi Li, Alberto Cuoci, Amsini Sadiki, Alessandro Parente
Publicado en: Energy Procedia, Edición 142, 2017, Página(s) 1570-1576, ISSN 1876-6102
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.egypro.2017.12.608

Flame Describing Functions of a Confined Premixed Swirled Combustor With Upstream and Downstream Forcing

Autores: R. Gaudron, M. Gatti, C. Mirat, T. Schuller
Publicado en: Journal of Engineering for Gas Turbines and Power, Edición 141/5, 2019, Página(s) 051016, ISSN 0742-4795
Editor: American Society of Mechanical Engineers
DOI: 10.1115/1.4041000

Direct Assessment of the Acoustic Scattering Matrix of a Turbulent Swirl Combustor by Combining System Identification, Large Eddy Simulation and Analytical Approaches

Autores: Malte Merk, Camilo Silva, Wolfgang Polifke, Renaud Gaudron, Marco Gatti, Clément Mirat, Thierry Schuller
Publicado en: Journal of Engineering for Gas Turbines and Power, Edición 141/2, 2019, Página(s) 021035, ISSN 0742-4795
Editor: American Society of Mechanical Engineers
DOI: 10.1115/1.4040731

Buoyancy effect in sooting laminar premixed ethylene flame

Autores: Warumporn Pejpichestakul, Alberto Cuoci, Alessio Frassoldati, Matteo Pelucchi, Alessandro Parente, Tiziano Faravelli
Publicado en: Combustion and Flame, Edición 205, 2019, Página(s) 135-146, ISSN 0010-2180
Editor: Elsevier BV
DOI: 10.1016/j.combustflame.2019.04.001

Impact of swirl and bluff-body on the transfer function of premixed flames

Autores: M. Gatti, R. Gaudron, C. Mirat, L. Zimmer, T. Schuller
Publicado en: Proceedings of the Combustion Institute, Edición 37/4, 2019, Página(s) 5197-5204, ISSN 1540-7489
Editor: Combustion Institute
DOI: 10.1016/j.proci.2018.06.148

Comprehensive kinetic study of combustion technologies for low environmental impact: MILD and OXY-fuel combustion of methane

Autores: Ghobad Bagheri, Eliseo Ranzi, Matteo Pelucchi, Alessandro Parente, Alessio Frassoldati, Tiziano Faravelli
Publicado en: Combustion and Flame, Edición 212, 2020, Página(s) 142-155, ISSN 0010-2180
Editor: Elsevier BV
DOI: 10.1016/j.combustflame.2019.10.014

Prediction of combustion noise of an enclosed flame by simultaneous identification of noise source and flame dynamics

Autores: M. Merk, R. Gaudron, C. Silva, M. Gatti, C. Mirat, T. Schuller, W. Polifke
Publicado en: Proceedings of the Combustion Institute, Edición 37/4, 2019, Página(s) 5263-5270, ISSN 1540-7489
Editor: Combustion Institute
DOI: 10.1016/j.proci.2018.05.124

Impact of the injector size on the transfer functions of premixed laminar conical flames

Autores: R. Gaudron, M. Gatti, C. Mirat, T. Schuller
Publicado en: Combustion and Flame, Edición 179, 2017, Página(s) 138-153, ISSN 0010-2180
Editor: Elsevier BV
DOI: 10.1016/j.combustflame.2017.01.022

A post processing technique to predict primary particle size of sooting flames based on a chemical discrete sectional model: Application to diluted coflow flames

Autores: Agnes Livia Bodor, Benedetta Franzelli, Tiziano Faravelli, Alberto Cuoci
Publicado en: Combustion and Flame, Edición 208, 2019, Página(s) 122-138, ISSN 0010-2180
Editor: Elsevier BV
DOI: 10.1016/j.combustflame.2019.06.008

In-situ measurement of residence time distributions in a turbulent oxy-fuel gas-flame combustor

Autores: Sebastian Bürkle, Lukas G. Becker, Maria Angela Agizza, Andreas Dreizler, Volker Ebert, Steven Wagner
Publicado en: Experiments in Fluids, Edición 58/7, 2017, ISSN 0723-4864
Editor: Springer Verlag
DOI: 10.1007/s00348-017-2366-2

Virtual chemistry for prediction of chemical flame structure in non adiabatic combustion

Autores: Giampaolo Maio, Renaud Mercier, Mélody Cailler and Benoît Fiorina
Publicado en: 8th EUROPEAN COMBUSTION MEETING, Edición 18-21 April 2017, 2017
Editor: Adria Combustion Institute
DOI: 10.5281/zenodo.583445

Resultado final

Publicaciones

Compartir esta página

Descargar