High-performance, Flexible, AUTOnomous Systems manufactured with Unique, Industrial ROLL-to-roll equipments

Deliverables

Documents, reports (8)

Report on R2R printed TFTs and basic circuits

Report on R2R printed TFTs and basic circuits

Report on R2R Sputtered semiconductor films for transistors

Report on R2R Sputtered and patterned In-free oxide semiconductor films for transistors

Report on R2R Atomic Layer Deposited insulator film for capacitors, transistors and encapsulation

Report on R2R Atomic Layer Deposited and patterned insulator film for capacitors, transistors and encapsulation

Compliance with nanoparticle handling under the Code of Conduct for a Responsible Nanosciences and Nanotechnology Research

In this deliverable documents related to the demonstration of compliance with the EU recommendations of 07/02/2008 on a Code of Conduct for a Responsible Nanosciences and Nanotechnologies Research, with special attention to health and safety procedures conforming to relevant local/national guidelines/legislation for staff involved in research, is to be submitted. This is following the recommendations of the Ethics committee report. No nanoparticle-related work with start within ROLL-OUT (WP1 and WP2) until this deliverable is submitted by M1.

Report on pressure, temperature and capacitive sensors based on optimized processes and structures

Apart from the electronics, the development of an autonomous system requires sensors and batteries. Development of such sensors and batteries to be used in this project will be reported in this deliverable.

Final publishable porgress report

Final public report of the project

In-free oxide TFTs on flexible substrates with µFE>15 cm2/Vs and ΔVT<0.5 V under NBIS with E=1 MV/cm for 1 h

Development of the basic building block of the components and systems - the transistor. The goal in this project is to use In-free materials and the results of this investigation will be reported in the deliverable.

Printed batteries with solid-state electrolyte for packaging and automotive applications

Development of printed batteries to be used in the autonomous systems will be done and reported here.

Websites, patent fillings, videos etc. (4)

Project website

A dedicated webpage for the project. This task will also include project Logo, presentation materials and other communication tools.

Final report on Dissemination actions

All dissemination and communication (seperate from dissemination) activities within the project will be reported here. Activity report on publications and presentations (public data available online)

Intermediate results on public dissemination

A brief report how the project has been made visible internationally.

2-page project presentation

A Project flyer to be distributed for public relations purpose.

Publications

Peer reviewed articles (20)

Materials Integration for Printed Zinc Oxide Thin-Film Transistors: Engineering of a Fully-Printed Semiconductor/Contact Scheme

Author(s): Xinxin Liu, Moritz Wegener, Sebastian Polster, Michael P. M. Jank, Andreas Roosen, Lothar Frey
Published in: Journal of Display Technology, Issue 12/3, 2016, Page(s) 214-218, ISSN 1551-319X
DOI: 10.1109/JDT.2015.2445378

Flexographic printing of nanoparticulate tin-doped indium oxide inks on PET foils and glass substrates

Author(s): Moritz Wegener, Dieter Spiehl, Hans Martin Sauer, Florian Mikschl, Xinxin Liu, Nadja Kölpin, Michael Schmidt, Michael P. M. Jank, Edgar Dörsam, Andreas Roosen
Published in: Journal of Materials Science, Issue 51/9, 2016, Page(s) 4588-4600, ISSN 0022-2461
DOI: 10.1007/s10853-016-9772-3

Far-UV Annealed Inkjet-Printed In 2 O 3 Semiconductor Layers for Thin-Film Transistors on a Flexible Polyethylene Naphthalate Substrate

Author(s): Jaakko Leppäniemi, Kim Eiroma, Himadri Majumdar, Ari Alastalo
Published in: ACS Applied Materials & Interfaces, Issue 9/10, 2017, Page(s) 8774-8782, ISSN 1944-8244
DOI: 10.1021/acsami.6b14654

Conducting redox polymers with non-activated charge transport properties

Author(s): Li Yang, Xiao Huang, Fikret Mamedov, Peng Zhang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Published in: Physical Chemistry Chemical Physics, Issue 19/36, 2017, Page(s) 25052-25058, ISSN 1463-9076
DOI: 10.1039/c7cp03939e

Bias Stress and Temperature Impact on InGaZnO TFTs and Circuits

Author(s): Jorge Martins, Pydi Bahubalindruni, Ana Rovisco, Asal Kiazadeh, Rodrigo Martins, Elvira Fortunato, Pedro Barquinha
Published in: Materials, Issue 10/6, 2017, Page(s) 680, ISSN 1996-1944
DOI: 10.3390/ma10060680

Quinone Based Conducting Redox Polymers for Electrical Energy Storage

Author(s): R. Emanuelsson, C. Karlsson, H. Huang, C. Kosgei, M. Strømme, and M. Sjödin
Published in: Russian Journal of Electrochemistry, Issue 1, 2017, Page(s) 8-15, ISSN 1023-1935

InGaZnO TFT behavioral model for IC design

Author(s): Pydi Bahubalindrun, Vítor Tavares, Pedro Barquinha, Pedro Guedes de Oliveira, Rodrigo Martins, Elvira Fortunato
Published in: Analog Integrated Circuits and Signal Processing, Issue 87/1, 2016, Page(s) 73-80, ISSN 0925-1030
DOI: 10.1007/s10470-016-0706-4

An All-Organic Proton Battery

Author(s): Rikard Emanuelsson, Mia Sterby, Maria Strømme, Martin Sjödin
Published in: Journal of the American Chemical Society, Issue 139/13, 2017, Page(s) 4828-4834, ISSN 0002-7863
DOI: 10.1021/jacs.7b00159

Synthesis and characterization of poly-3-((2,5-hydroquinone)vinyl)-1H-pyrrole: investigation on backbone/pendant interactions in a conducting redox polymer

Author(s): Hao Huang, Christoffer Karlsson, Maria Strømme, Adolf Gogoll, Martin Sjödin
Published in: Physical Chemistry Chemical Physics, Issue 19/16, 2017, Page(s) 10427-10435, ISSN 1463-9076
DOI: 10.1039/C6CP08736A

Characterization of PEDOT-Quinone Conducting Redox Polymers for Water Based Secondary Batteries

Author(s): Mia Sterby, Rikard Emanuelsson, Xiao Huang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Published in: Electrochimica Acta, Issue 235, 2017, Page(s) 356-364, ISSN 0013-4686
DOI: 10.1016/j.electacta.2017.03.068

A Low-Power Analog Adder and Driver Using a-IGZO TFTs

Author(s): Pydi Ganga Bahubalindruni, Vitor Grade Tavares, Rodrigo Martins, Elvira Fortunato, Pedro Barquinha
Published in: IEEE Transactions on Circuits and Systems I: Regular Papers, Issue 64/5, 2017, Page(s) 1118-1125, ISSN 1549-8328
DOI: 10.1109/tcsi.2016.2635442

Enthalpic versus Entropic Contribution to the Quinone Formal Potential in a Polypyrrole-Based Conducting Redox Polymer

Author(s): Rikard Emanuelsson, Hao Huang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Published in: The Journal of Physical Chemistry C, Issue 120/38, 2016, Page(s) 21178-21183, ISSN 1932-7447
DOI: 10.1021/acs.jpcc.6b05353

Improving positive and negative bias illumination stress stability in parylene passivated IGZO transistors

Author(s): Asal Kiazadeh, Henrique L. Gomes, Pedro Barquinha, Jorge Martins, Ana Rovisco, Joana V. Pinto, Rodrigo Martins, Elvira Fortunato
Published in: Applied Physics Letters, Issue 109/5, 2016, Page(s) 051606, ISSN 0003-6951
DOI: 10.1063/1.4960200

Effect of the Linker in Terephthalate-Functionalized Conducting Redox Polymers

Author(s): Li Yang, Xiao Huang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Published in: Electrochimica Acta, Issue 222, 2016, Page(s) 149-155, ISSN 0013-4686
DOI: 10.1016/j.electacta.2016.10.183

Influence of Channel Length Scaling on InGaZnO TFTs Characteristics: Unity Current-Gain Cutoff Frequency, Intrinsic Voltage-Gain, and On-Resistance

Author(s): Pydi Ganga Bahubalindruni, Asal Kiazadeh, Allegra Sacchetti, Jorge Martins, Ana Rovisco, Vitor Grade Tavares, Rodrigo Martins, Elvira Fortunato, Pedro Barquinha
Published in: Journal of Display Technology, Issue 12/6, 2016, Page(s) 515-518, ISSN 1551-319X
DOI: 10.1109/JDT.2016.2550610

Stable Deep Doping of Vapor-Phase Polymerized Poly(3,4-ethylenedioxythiophene)/Ionic Liquid Supercapacitors

Author(s): Christoffer Karlsson, James Nicholas, Drew Evans, Maria Forsyth, Maria Strømme, Martin Sjödin, Patrick C. Howlett, Cristina Pozo-Gonzalo
Published in: ChemSusChem, Issue 9/16, 2016, Page(s) 2112-2121, ISSN 1864-5631
DOI: 10.1002/cssc.201600333

InGaZnO Thin-Film-Transistor-Based Four-Quadrant High-Gain Analog Multiplier on Glass

Author(s): Pydi Ganga Bahubalindruni, Vitor Grade Tavares, Jerome Borme, Pedro Guedes de Oliveira, Rodrigo Martins, Elvira Fortunato, Pedro Barquinha
Published in: IEEE Electron Device Letters, Issue 37/4, 2016, Page(s) 419-421, ISSN 0741-3106
DOI: 10.1109/LED.2016.2535469

Conducting Redox Polymer Based Anode Materials for High Power Electrical Energy Storage

Author(s): Li Yang, Xiao Huang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Published in: Electrochimica Acta, Issue 204, 2016, Page(s) 270-275, ISSN 0013-4686
DOI: 10.1016/j.electacta.2016.03.163

In 2 O 3 Thin-Film Transistors via Inkjet Printing for Depletion-Load nMOS Inverters

Author(s): J. Leppaniemi, K. Eiroma, H. S. Majumdar, A. Alastalo
Published in: IEEE Electron Device Letters, Issue 37/4, 2016, Page(s) 445-448, ISSN 0741-3106
DOI: 10.1109/LED.2016.2529183

Flexography-Printed In 2 O 3 Semiconductor Layers for High-Mobility Thin-Film Transistors on Flexible Plastic Substrate

Author(s): Jaakko Leppäniemi, Olli-Heikki Huttunen, Himadri Majumdar, Ari Alastalo
Published in: Advanced Materials, Issue 27/44, 2015, Page(s) 7168-7175, ISSN 0935-9648
DOI: 10.1002/adma.201502569

Book chapters (1)

TCAD Simulation of Amorphous Indium-Gallium-Zinc Oxide Thin-Film Transistors

Author(s): Jorge Martins, Pedro Barquinha, João Goes
Published in: Technological Innovation for Cyber-Physical Systems, 2016, Page(s) 551-557
DOI: 10.1007/978-3-319-31165-4_52