High-performance, Flexible, AUTOnomous Systems manufactured with Unique, Industrial ROLL-to-roll equipments

Livrables

Report on R2R printed TFTs and basic circuits
Report on R2R Sputtered semiconductor films for transistors

Report on R2R Sputtered and patterned In-free oxide semiconductor films for transistors

Report on R2R Atomic Layer Deposited insulator film for capacitors, transistors and encapsulation

Report on R2R Atomic Layer Deposited and patterned insulator film for capacitors, transistors and encapsulation

Compliance with nanoparticle handling under the Code of Conduct for a Responsible Nanosciences and Nanotechnology Research

In this deliverable documents related to the demonstration of compliance with the EU recommendations of 07/02/2008 on a Code of Conduct for a Responsible Nanosciences and Nanotechnologies Research, with special attention to health and safety procedures conforming to relevant local/national guidelines/legislation for staff involved in research, is to be submitted. This is following the recommendations of the Ethics committee report. No nanoparticle-related work with start within ROLL-OUT (WP1 and WP2) until this deliverable is submitted by M1.

Report on pressure, temperature and capacitive sensors based on optimized processes and structures

Apart from the electronics, the development of an autonomous system requires sensors and batteries. Development of such sensors and batteries to be used in this project will be reported in this deliverable.

Final publishable porgress report

Final public report of the project

In-free oxide TFTs on flexible substrates with µFE>15 cm2/Vs and ΔVT<0.5 V under NBIS with E=1 MV/cm for 1 h

Development of the basic building block of the components and systems - the transistor. The goal in this project is to use In-free materials and the results of this investigation will be reported in the deliverable.

Printed batteries with solid-state electrolyte for packaging and automotive applications

Development of printed batteries to be used in the autonomous systems will be done and reported here.

Project website

A dedicated webpage for the project. This task will also include project Logo, presentation materials and other communication tools.

Final report on Dissemination actions

All dissemination and communication (seperate from dissemination) activities within the project will be reported here. Activity report on publications and presentations (public data available online)

Intermediate results on public dissemination

A brief report how the project has been made visible internationally.

2-page project presentation

A Project flyer to be distributed for public relations purpose.

Publications

Materials Integration for Printed Zinc Oxide Thin-Film Transistors: Engineering of a Fully-Printed Semiconductor/Contact Scheme

Auteurs: Xinxin Liu, Moritz Wegener, Sebastian Polster, Michael P. M. Jank, Andreas Roosen, Lothar Frey
Publié dans: Journal of Display Technology, Numéro 12/3, 2016, Page(s) 214-218, ISSN 1551-319X
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/JDT.2015.2445378

Flexographic printing of nanoparticulate tin-doped indium oxide inks on PET foils and glass substrates

Auteurs: Moritz Wegener, Dieter Spiehl, Hans Martin Sauer, Florian Mikschl, Xinxin Liu, Nadja Kölpin, Michael Schmidt, Michael P. M. Jank, Edgar Dörsam, Andreas Roosen
Publié dans: Journal of Materials Science, Numéro 51/9, 2016, Page(s) 4588-4600, ISSN 0022-2461
Éditeur: Kluwer Academic Publishers
DOI: 10.1007/s10853-016-9772-3

Far-UV Annealed Inkjet-Printed In 2 O 3 Semiconductor Layers for Thin-Film Transistors on a Flexible Polyethylene Naphthalate Substrate

Auteurs: Jaakko Leppäniemi, Kim Eiroma, Himadri Majumdar, Ari Alastalo
Publié dans: ACS Applied Materials & Interfaces, Numéro 9/10, 2017, Page(s) 8774-8782, ISSN 1944-8244
Éditeur: American Chemical Society
DOI: 10.1021/acsami.6b14654

Conducting redox polymers with non-activated charge transport properties

Auteurs: Li Yang, Xiao Huang, Fikret Mamedov, Peng Zhang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Publié dans: Physical Chemistry Chemical Physics, Numéro 19/36, 2017, Page(s) 25052-25058, ISSN 1463-9076
Éditeur: Royal Society of Chemistry
DOI: 10.1039/c7cp03939e

Bias Stress and Temperature Impact on InGaZnO TFTs and Circuits

Auteurs: Jorge Martins, Pydi Bahubalindruni, Ana Rovisco, Asal Kiazadeh, Rodrigo Martins, Elvira Fortunato, Pedro Barquinha
Publié dans: Materials, Numéro 10/6, 2017, Page(s) 680, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma10060680

Quinone Based Conducting Redox Polymers for Electrical Energy Storage

Auteurs: R. Emanuelsson, C. Karlsson, H. Huang, C. Kosgei, M. Strømme, and M. Sjödin
Publié dans: Russian Journal of Electrochemistry, Numéro 1, 2017, Page(s) 8-15, ISSN 1023-1935
Éditeur: Maik Nauka/Interperiodica Publishing

InGaZnO TFT behavioral model for IC design

Auteurs: Pydi Bahubalindrun, Vítor Tavares, Pedro Barquinha, Pedro Guedes de Oliveira, Rodrigo Martins, Elvira Fortunato
Publié dans: Analog Integrated Circuits and Signal Processing, Numéro 87/1, 2016, Page(s) 73-80, ISSN 0925-1030
Éditeur: Kluwer Academic Publishers
DOI: 10.1007/s10470-016-0706-4

An All-Organic Proton Battery

Auteurs: Rikard Emanuelsson, Mia Sterby, Maria Strømme, Martin Sjödin
Publié dans: Journal of the American Chemical Society, Numéro 139/13, 2017, Page(s) 4828-4834, ISSN 0002-7863
Éditeur: American Chemical Society
DOI: 10.1021/jacs.7b00159

Synthesis and characterization of poly-3-((2,5-hydroquinone)vinyl)-1H-pyrrole: investigation on backbone/pendant interactions in a conducting redox polymer

Auteurs: Hao Huang, Christoffer Karlsson, Maria Strømme, Adolf Gogoll, Martin Sjödin
Publié dans: Physical Chemistry Chemical Physics, Numéro 19/16, 2017, Page(s) 10427-10435, ISSN 1463-9076
Éditeur: Royal Society of Chemistry
DOI: 10.1039/C6CP08736A

Characterization of PEDOT-Quinone Conducting Redox Polymers for Water Based Secondary Batteries

Auteurs: Mia Sterby, Rikard Emanuelsson, Xiao Huang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Publié dans: Electrochimica Acta, Numéro 235, 2017, Page(s) 356-364, ISSN 0013-4686
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2017.03.068

A Low-Power Analog Adder and Driver Using a-IGZO TFTs

Auteurs: Pydi Ganga Bahubalindruni, Vitor Grade Tavares, Rodrigo Martins, Elvira Fortunato, Pedro Barquinha
Publié dans: IEEE Transactions on Circuits and Systems I: Regular Papers, Numéro 64/5, 2017, Page(s) 1118-1125, ISSN 1549-8328
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tcsi.2016.2635442

Enthalpic versus Entropic Contribution to the Quinone Formal Potential in a Polypyrrole-Based Conducting Redox Polymer

Auteurs: Rikard Emanuelsson, Hao Huang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Publié dans: The Journal of Physical Chemistry C, Numéro 120/38, 2016, Page(s) 21178-21183, ISSN 1932-7447
Éditeur: American Chemical Society
DOI: 10.1021/acs.jpcc.6b05353

Improving positive and negative bias illumination stress stability in parylene passivated IGZO transistors

Auteurs: Asal Kiazadeh, Henrique L. Gomes, Pedro Barquinha, Jorge Martins, Ana Rovisco, Joana V. Pinto, Rodrigo Martins, Elvira Fortunato
Publié dans: Applied Physics Letters, Numéro 109/5, 2016, Page(s) 051606, ISSN 0003-6951
Éditeur: American Institute of Physics
DOI: 10.1063/1.4960200

Effect of the Linker in Terephthalate-Functionalized Conducting Redox Polymers

Auteurs: Li Yang, Xiao Huang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Publié dans: Electrochimica Acta, Numéro 222, 2016, Page(s) 149-155, ISSN 0013-4686
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2016.10.183

Influence of Channel Length Scaling on InGaZnO TFTs Characteristics: Unity Current-Gain Cutoff Frequency, Intrinsic Voltage-Gain, and On-Resistance

Auteurs: Pydi Ganga Bahubalindruni, Asal Kiazadeh, Allegra Sacchetti, Jorge Martins, Ana Rovisco, Vitor Grade Tavares, Rodrigo Martins, Elvira Fortunato, Pedro Barquinha
Publié dans: Journal of Display Technology, Numéro 12/6, 2016, Page(s) 515-518, ISSN 1551-319X
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/JDT.2016.2550610

Stable Deep Doping of Vapor-Phase Polymerized Poly(3,4-ethylenedioxythiophene)/Ionic Liquid Supercapacitors

Auteurs: Christoffer Karlsson, James Nicholas, Drew Evans, Maria Forsyth, Maria Strømme, Martin Sjödin, Patrick C. Howlett, Cristina Pozo-Gonzalo
Publié dans: ChemSusChem, Numéro 9/16, 2016, Page(s) 2112-2121, ISSN 1864-5631
Éditeur: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/cssc.201600333

InGaZnO Thin-Film-Transistor-Based Four-Quadrant High-Gain Analog Multiplier on Glass

Auteurs: Pydi Ganga Bahubalindruni, Vitor Grade Tavares, Jerome Borme, Pedro Guedes de Oliveira, Rodrigo Martins, Elvira Fortunato, Pedro Barquinha
Publié dans: IEEE Electron Device Letters, Numéro 37/4, 2016, Page(s) 419-421, ISSN 0741-3106
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/LED.2016.2535469

Conducting Redox Polymer Based Anode Materials for High Power Electrical Energy Storage

Auteurs: Li Yang, Xiao Huang, Adolf Gogoll, Maria Strømme, Martin Sjödin
Publié dans: Electrochimica Acta, Numéro 204, 2016, Page(s) 270-275, ISSN 0013-4686
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2016.03.163

In 2 O 3 Thin-Film Transistors via Inkjet Printing for Depletion-Load nMOS Inverters

Auteurs: J. Leppaniemi, K. Eiroma, H. S. Majumdar, A. Alastalo
Publié dans: IEEE Electron Device Letters, Numéro 37/4, 2016, Page(s) 445-448, ISSN 0741-3106
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.1109/LED.2016.2529183

Flexography-Printed In 2 O 3 Semiconductor Layers for High-Mobility Thin-Film Transistors on Flexible Plastic Substrate

Auteurs: Jaakko Leppäniemi, Olli-Heikki Huttunen, Himadri Majumdar, Ari Alastalo
Publié dans: Advanced Materials, Numéro 27/44, 2015, Page(s) 7168-7175, ISSN 0935-9648
Éditeur: United Nations Industrial Developement Organization
DOI: 10.1002/adma.201502569

TCAD Simulation of Amorphous Indium-Gallium-Zinc Oxide Thin-Film Transistors

Auteurs: Jorge Martins, Pedro Barquinha, João Goes
Publié dans: Technological Innovation for Cyber-Physical Systems, 2016, Page(s) 551-557, ISBN 978-3-319-31165-4
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-31165-4_52

Livrables

Publications

Partager cette page

Télécharger