Livrables
The complete public dissemination activities will be here reported.
Report on the performance of the fabricated sensing array with a scalable studyOnce an optimal and scalable fabrication of the sensor is achieved, the performance is determined. The goal is to determine the key performance indicators of the sensor such as resolution, sensitivity, stability and noise level.
Report on the Substrate influence on temperature sensors array performanceThe report will determine which substrate materials are suitable for the flexible sensor array. The thermophysical and chemical properties of the substrate are expected to play a crucial role in the selection of optimal substrate for the sensor performance.
Project Fact SheetThe project fact sheet and project presentation will be delivered.
Report on the Band structures, Electrical conductivity and Seebeck coefficients and ZTThe band structures of the relevant TE materials will be provided by the Abinit code and the electrical properties will be deduced with the Bolztrap code. The effect of doping on ZT will be emphasized.
Report on the durability and reproducibility of the TE-TFIn order to assess the behavior of the TE-TF over time, their durability and reproducibility will be evaluated from time to time, measuring the performances of the films through time and repeating working cycles.
Report on deposition temperature influence on temperature sensors array performanceThe report will discuss the optimal deposition temperature for the functional material of the sensor array as the film properties are highly dependent on the deposition temperature.
Comparison between the TE properties of films deposited by sputtering/thermal evaporation and by ALDSince the TE-TF will be deposited through different techniques, it is important to understand the influence of the deposition system on the TE properties and compare them. The goal is to have TE-TF deposited by ALD with the same (or better) properties then deposited by sputtering or thermal evaporation
Activity report on publications and presentations (public data available online)All publications and presentation from the partners will be reported on the project website. Their status will be public or confidential depending on the partners wish.
Report on the Thermal conductivity of Bulk and nanograin filmsThe interatomic potentials will be defined to compute the thermal conductivity of relevant TE materials by using the conventional equilibrium and non-equilibrium Molecular Dynamics techniques. The effect of doping on thermal conductivity will be highlighted.
Study a scalable fabrication of the substrate material combination including interfaces, contacting and wiringThe study realizes a route how the sensor array may be fabricated at large scale. Materials and methods will be determined for fabrication of the sensor array and a way to connect it electrically with electronics.
Report on small area TE-TF devices with optimized properties for energy harvesting and thermal controlSmall area TE-TF devices will be fabricated in order to demonstrate their behavior for energy harvesting and thermal control
Report on the optimized deposition processes together with the post deposition treatmentsAt this point, the deposition processes have been optimized and the influence of the deposition and post deposition parameters on the TE properties and substrate adhesion have been understood and will be reported
Comparison between the TE properties of the deposited TF and the simulations results.At this point the TE TF have been optimized to have a ZT up to 0.5 at room temperature and their properties will be compared to the ones simulated based on materials theory.
This deliverable will report the activity related with dissemination of project giving open access to all public results
Publications
Auteurs:
Kirsi Tappura
Publié dans:
Renewable Energy, Numéro 120, 2018, Page(s) 78-87, ISSN 0960-1481
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.renene.2017.12.063
Auteurs:
David M. Sousa, João Carlos Lima, Isabel Ferreira
Publié dans:
ChemistrySelect, Numéro 2/3, 2017, Page(s) 1271-1274, ISSN 2365-6549
Éditeur:
John Wiley & Sons Inc
DOI:
10.1002/slct.201601804
Auteurs:
Joana Figueira, Joana Loureiro, José Marques, Catarina Bianchi, Paulo Duarte, Mikko Ruoho, Ilkka Tittonen, Isabel Ferreira
Publié dans:
ACS Applied Materials & Interfaces, Numéro 9/7, 2017, Page(s) 6520-6529, ISSN 1944-8244
Éditeur:
American Chemical Society
DOI:
10.1021/acsami.6b12753
Auteurs:
Van-Truong Tran, Jérôme Saint-Martin, Philippe Dollfus, Sebastian Volz
Publié dans:
Scientific Reports, Numéro 7/1, 2017, ISSN 2045-2322
Éditeur:
Nature Publishing Group
DOI:
10.1038/s41598-017-02230-0
Auteurs:
Joana Loureiro, Tiago Mateus, Sergej Filonovich, Marisa Ferreira, Joana Figueira, Alexandra Rodrigues, Brian F. Donovan, Patrick E. Hopkins, Isabel Ferreira
Publié dans:
Thin Solid Films, Numéro 642, 2017, Page(s) 276-280, ISSN 0040-6090
Éditeur:
Elsevier Sequoia
DOI:
10.1016/j.tsf.2017.09.047
Auteurs:
Paulina Faria, Paulo Duarte, Davide Barbosa, Isabel Ferreira
Publié dans:
Construction and Building Materials, Numéro 156, 2017, Page(s) 1150-1157, ISSN 0950-0618
Éditeur:
Elsevier BV
DOI:
10.1016/j.conbuildmat.2017.09.072
Auteurs:
Van-Truong Tran, Jérôme Saint-Martin, Philippe Dollfus, Sebastian Volz
Publié dans:
AIP Advances, Numéro 7/7, 2017, Page(s) 075212, ISSN 2158-3226
Éditeur:
American Institute of Physics Inc.
DOI:
10.1063/1.4994771
Auteurs:
A. C. Baptista, I. Ropio, B. Romba, J. P. Nobre, C. Henriques, J. C. Silva, J. I. Martins, J. P. Borges, I. Ferreira
Publié dans:
Journal of Materials Chemistry A, Numéro 6/1, 2018, Page(s) 256-265, ISSN 2050-7488
Éditeur:
Royal Society of Chemistry
DOI:
10.1039/C7TA06457H
Auteurs:
Kaarle Jaakkola, Kirsi Tappura
Publié dans:
IEEE Sensors Journal, Numéro 18/17, 2018, Page(s) 7193-7202, ISSN 1530-437X
Éditeur:
Institute of Electrical and Electronics Engineers
DOI:
10.1109/jsen.2018.2852561
Auteurs:
Kirsi Tappura, Kaarle Jaakkola
Publié dans:
Proceedings, Numéro 2/13, 2018, Page(s) 779, ISSN 2504-3900
Éditeur:
MDPI AG
DOI:
10.3390/proceedings2130779
Auteurs:
C. Bianchi, L. M. Ferreira, J. Loureiro, A. Rodrigues, P. Duarte, A. C. Baptista, I. M. Ferreira
Publié dans:
Journal of Electronic Materials, Numéro 45/3, 2016, Page(s) 1987-1991, ISSN 0361-5235
Éditeur:
Institute of Electrical and Electronics Engineers
DOI:
10.1007/s11664-016-4363-2
Auteurs:
Catarina Bianchi, Joana Loureiro, Paulo Duarte, Jose Marques, Joana Figueira, Ines Ropio, Isabel Ferreira
Publié dans:
Advanced Materials Technologies, Numéro 1/6, 2016, Page(s) 1600077, ISSN 2365-709X
Éditeur:
Wiley-VCH
DOI:
10.1002/admt.201600077
Auteurs:
Mikko Ruoho, Taneli Juntunen, Ilkka Tittonen
Publié dans:
Nanotechnology, Numéro 27/35, 2016, Page(s) 355403, ISSN 0957-4484
Éditeur:
Institute of Physics Publishing
DOI:
10.1088/0957-4484/27/35/355403
Auteurs:
Saima Ali, Taneli Juntunen, Sakari Sintonen, Oili M E Ylivaara, Riikka L Puurunen, Harri Lipsanen, Ilkka Tittonen, Simo-Pekka Hannula
Publié dans:
Nanotechnology, Numéro 27/44, 2016, Page(s) 445704, ISSN 0957-4484
Éditeur:
Institute of Physics Publishing
DOI:
10.1088/0957-4484/27/44/445704
Auteurs:
Mikko Ruoho, Taneli Juntunen, Tapani Alasaarela, Marko Pudas, Ilkka Tittonen
Publié dans:
Advanced Materials Technologies, Numéro 1/9, 2016, Page(s) 1600204, ISSN 2365-709X
Éditeur:
Wiley-VCH
DOI:
10.1002/admt.201600204
Auteurs:
Bruno Miguel Morais Faustino, Diogo Gomes, Jaime Faria, Taneli Juntunen, Guilherme Gaspar, Catarina Bianchi, António Almeida, Ana Marques, Ilkka Tittonen, Isabel Ferreira
Publié dans:
Scientific Reports, Numéro 8/1, 2018, ISSN 2045-2322
Éditeur:
Nature Publishing Group
DOI:
10.1038/s41598-018-25106-3
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible