European Training Network on “Process Fingerprint for Zero-defect Net-shape MICROMANufacturing”

Livrables

MICROMAN micro manufacturing handbook
ESR scientific publications
MICROMAN Session at Multi-Material Micro Manuf. Conf. (4M/ICOMM)

Conference

ESRs open positions advertisement

Videos from selected technological workshops

Videos from selected technological workshops Deadlines: M48

MICROMAN public project website and MICROMAN LinkedIn profile

ADM

ESR PhD degrees

ESR PhD degrees --- For those ESR not finishing their PhD project within the terms of the MICROMAN project (D5.5 and milestone M9) (and that therefore cannot be awarded the PhD degree at M48) the MICROMAN European Micro Manufacturing Academy ‘Certified Micro Manufacturing Doctorate Engineer’ title will be awarded since all ESRs will have completerd the MICROMAN training (see milestone M10)

Publications

Evaluation of On-Machine Gap Measurement Strategies in Jet-Electrochemical Machining

Auteurs: Matin Yahyavi Zanjani, PD Dr.-Ing. habil. Matthias Hackert-Oschätzchen, André Martin, Prof. Dr.-Ing. Andreas Schubert
Publié dans: Proceedings of International Symposium on Electrochemical Machining Technology, 2017, 2017, Page(s) 94-100
Éditeur: International Symposium on Electrochemical Machining Technology

Electro sinter forging of titanium disks

Auteurs: Emanuele Cannella, Chris Valentin Nielsen, Niels Oluf Bay
Publié dans: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, 2017
Éditeur: euspen

Tool design and materials for electro sinter forging (ESF)

Auteurs: Emanuele Cannella, Chris Valentin Nielsen
Publié dans: Proceedings of the 8th JSTP International Seminar on Precision Forging, 2018, Page(s) 93-96
Éditeur: Japan Society for Technology of Plasticity

Ejection force analysis of sintered aluminium micro gears using a shrink-fit die principle

Auteurs: Emanuele Cannella, Emil Krabbe Nielsen, Mogens Arentoft
Publié dans: Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016), 2016, Page(s) pp. 41- 44
Éditeur: 4M Association
DOI: 10.3850/978-981-11-0749-8694

Process Fingerprint Concept for Micro Grinding of Dental Ceramic Implants

Auteurs: Pablo Fook, Carla Flosky, Oltmann Riemer
Publié dans: Kolloquium Mikroproduktion, 2017, Page(s) 163-170, ISBN 978-3-933762-56-6
Éditeur: BIAS Verlag, 2017

Process/Product Fingerprint concept for micro injection moulding of a medical micro component

Auteurs: Antonio Luca, Oltmann Riemer
Publié dans: Proceedings of the Kolloquium Mikroproduktion, 2017, Page(s) 77-82, ISBN 978-3-933762-56-6
Éditeur: BIAS Verlag, 2017

Prediction of micro-sized flash using micro-injection moulding process simulations

Auteurs: Federico Baruffi, Matteo Calaon, Guido Tosello
Publié dans: Proceedings of the 18th International Conference & Exhibition of euspen, Numéro 2018, 2018, Page(s) 263-264, ISBN 978-0-9957751-2-1
Éditeur: European Society for Precision Engineering and Nanotechnology

Micro injection moulding process optimization of an ultra-small POM three-dimensional component

Auteurs: Federico Baruffi, Matteo Calaon, Guido Tosello
Publié dans: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, Numéro 2017, 2017
Éditeur: euspen

On the performance of micro injection moulding process simulations of TPE micro rings

Auteurs: Federico Baruffi, Matteo Calaon, Guido Tosello
Publié dans: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, Numéro 2017, 2017
Éditeur: euspen

Process parameter influence on Electro-sinter-forging (ESF) of titanium discs

Auteurs: Emanuele Cannella; Chris Valentin Nielsen; Niels Bay
Publié dans: Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology, 2018
Éditeur: euspen 2018

Micro product and process fingerprints for zero-defect net-shape micromanufacturing

Auteurs: Guido Tosello, Mert Gulcur, Ben Whiteside, Phil Coates, Antonio Luca, Pablo Fook, Oltmann Riemer, Igor Danilov, Matin Yahyavi Zanjani, Matthias Hackert-Oschätzchen, Andreas Schubert, Federico Baruffi, Soufian Ben Achour, Matteo Calaon, Chris Valentin Nielsen, Giuliano Bissacco, Anette Rasmussen, Mattia Bellotti, Krishna Kumar Saxena, Jun Qian, Dominiek Reynaerts, Teguh Santoso, Sandeep Kuriakose,
Publié dans: Proceedings of the 19th International Conference of euspen, 2019, Page(s) 98-99
Éditeur: euspen

On the Applicability of Micro-injection Moulding Simulations to Multivariate Integrated Process/Product Optimization

Auteurs: F. Baruffi, M. Calaon, G. Tosello, R. Elsborg
Publié dans: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 171-174, ISBN 978-981-11-2728-1
Éditeur: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_18

Thermal characterization of a micro polishing machine and effect on path strategy compensation

Auteurs: Soufian Ben Achour, Alessandro Checchi, Giuliano Bissacco, Leonardo De Chiffre, Hans Nørgaard Hansen
Publié dans: Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology, 2019, Page(s) 446-447
Éditeur: euspen

Applicability of Acoustic Emission monitoring to micro polishing

Auteurs: Soufian Ben Achour, Giuliano Bissacco, Leonardo De Chiffre
Publié dans: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, 2018, Page(s) 385-356
Éditeur: euspen

Twin-wire electrical discharge grinding for shaping tapered micro rods

Auteurs: Yan-Qing Wang, Mattia Bellotti, jun Qian, Dominiek Reynaerts,
Publié dans: Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology, 2019, Page(s) 444-445
Éditeur: euspen

Wire electrical discharge grinding of micro rods for bonding-free fabrication of soft pneumatic microactuators

Auteurs: Mattia Bellotti, Edoardo Milana, Benjamin Gorissen, Jun Qian, Dominiek Reynaerts
Publié dans: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology,, 2018, Page(s) 413-414
Éditeur: euspen

Transient Simulation of the Removal Process in Plasma Electrolytic Polishing of Stainless Steel

Auteurs: Igor Danilov, Matthias Hackert-Oschätzchen, I. Schaarsschmidt, Andreas Schubert
Publié dans: COMSOL conference, 2018, ISBN 978-0-9910001-6-6
Éditeur: COMSOL

In-line monitoring of micro structured surface replication in micro-injection moulding

Auteurs: Federico Baruffi, Mert Gulcur, Matteo Calaon, Ben Whiteside, Guido Tosello
Publié dans: Abstract presented at the euspen Special Interest Group on Structured and Freeform Surfaces, 2018
Éditeur: euspen

Surface integrity investigation of ground ceramic workpieces for biomedical applications

Auteurs: Pablo Fook, Oltmann Riemer, Bernhard Karpuschewski
Publié dans: Proceedings of the 19th euspen International Conference & Exhibition, 2019
Éditeur: euspen

Process and product fingerprint concept for microinjection moulding of thermoplastic microneedle arrays

Auteurs: Mert Gulcur, Ben Whiteside, Pablo Fook, Kai Rickens, Oltmann Riemer
Publié dans: Proceedings of the euspen 19th International Conference & Exhibition, 2019
Éditeur: euspen

Surface and subsurface characterisation of bioceramic workpieces machined by micro-grinding

Auteurs: Pablo Fook, Kai Rickens, Oltmann Riemer
Publié dans: Proceedings of the 18th euspen International Conference & Exhibition, 2018
Éditeur: euspen

Characterisation of Zirconia-based Ceramics after Micro-Grinding

Auteurs: Pablo Fook, Oltmann Riemer
Publié dans: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 175-178, ISBN 978-981-11-2728-1
Éditeur: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_31

Effect of thermal conductivity on the achievable flow length of micro injection moulded parts

Auteurs: Antonio Luca, Carla Flosky, Oltmann Riemer
Publié dans: Proceedings of the 19th euspen International Conference & Exhibition, 2019, Page(s) 398-399
Éditeur: euspen

Prediction of shrinkage and warpage effects of a micro component via injection molding process simulation

Auteurs: Antonio Luca, Henrik Siesenis, Oltmann Riemer
Publié dans: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 167-170, ISBN 978-981-11-2728-1
Éditeur: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_08

A hybrid laser ablation and chemical etching process for manufacturing nature-inspired anisotropic superhydrophobic structures

Auteurs: Yukui Cai, Xichun Luo, Zongwei Xu, King Hang Aaron Lau, Fei Ding, Yi Qin
Publié dans: Proceedings of the 19th euspen International Conference & Exhibition, 2019
Éditeur: euspen

Simulation Study of Dynamic Behaviour of Water Droplet on Laser Machined Surface

Auteurs: Yukui Cai, Xichun Luo
Publié dans: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 179-182, ISBN 978-981-11-2728-1
Éditeur: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_94

Fabrication of hydrophobic structures by nanosecond pulse laser

Auteurs: Yukui Cai, Ana Sousa, King Hang Aaron Lau, Wenlong Chang, Xichun Luo
Publié dans: 15th International Conference on Manufacturing Research, 2017
Éditeur: IOS Press

On-machine optical surface topography measurement sensor based on focus variation

Auteurs: Subbareddy Darukumalli, Teguh Santoso, Wahyudin Syam, Franz Helmli, Richard Leach
Publié dans: Proceedings of the 19th euspen International Conference & Exhibition, 2019
Éditeur: euspen

Investigating the effect of the feedstock shape on ultrasonic microinjection moulding

Auteurs: Mert Gulcur, Ben Whiteside, Phil Coates
Publié dans: Proceedings of the ANTEC conference 2019, 2019
Éditeur: SPE

Replication of laser structured surfaces using ultrasonic micro-injection moulding

Auteurs: Mert Gulcur, Ben Whiteside, Pavel Penchev, Jean-Michel Romano,
Publié dans: Abstract presented at the euspen Special Interest Group on Structured and Freeform Surfaces, 2018
Éditeur: euspen

Process fingerprinting for optimized production of thermoplastic microneedle arrays using ultrasonic microinjection moulding

Auteurs: Mert Gulcur, Ben Whiteside
Publié dans: Abstract for P70 – Polymer Engineering International/UK-China AMRI Research Workshop, 2018
Éditeur: University of Bradford

Ultrasonic injection moulding of polypropylene and thermal visualization of the process using bespoke injection mould tool

Auteurs: Mert Gulcur, Ben Whiteside, Karthick Nair, Max Babenko, Phil Coates
Publié dans: Proceedings of the 18th euspen International Conference & Exhibition, 2018
Éditeur: euspen

Effect of initial material shape and compaction routes on ultrasonic injection moulding of thermoplastic materials

Auteurs: Mert Gulcur, Ben Whiteside, Max Babenko
Publié dans: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, 2017
Éditeur: euspen

Laser confocal microscope noise evaluation on injection compression moulded (ICM) transparent polymer Fresnel lenses

Auteurs: Dario Loaldi, Matteo Calaon, Danilo Quagliotti, Federico Baruffi, Paolo Parenti, Guido Tosello, Massimiliano Annoni
Publié dans: Proceedings of the 17th euspen International Conference & Exhibition, 2017, Page(s) 357-358
Éditeur: euspen

Correction of Systematic Behaviour in Topographical Surface Analysis

Auteurs: D. Quagliotti, F. Baruffi, G. Tosello, S. Gasparin, M. Annoni, P. Parenti, R. Sobiecki, H. N. Hansen
Publié dans: 4M/IWMF2016 The Global Conference on Micro Manufacture : Incorporating the 11th International Conference on Multi-Material Micro Manufacture (4M) and the 10th International Workshop on Microfactories (IWMF), 2016, Page(s) 277-280, ISBN 978-981-11-0749-8
Éditeur: Research Publishing Services
DOI: 10.3850/978-981-11-0749-8_738

Investigation on the Micromilled Surface Characterization Through Replica Technology

Auteurs: F. Baruffi, P. Parenti, F. Cacciatore, M. Annoni, G. Tosello
Publié dans: 4M/IWMF2016 The Global Conference on Micro Manufacture : Incorporating the 11th International Conference on Multi-Material Micro Manufacture (4M) and the 10th International Workshop on Microfactories (IWMF), 2016, Page(s) 273-276, ISBN 978-981-11-0749-8
Éditeur: Research Publishing Services
DOI: 10.3850/978-981-11-0749-8_726

Performance verification of focus variation and confocal microscopes measuring tilted ultra-fine surfaces

Auteurs: Danilo Quagliotti, Federico Baruffi, Guido Tosello, Stefania Gasparin, Massimiliano Annoni, Paolo Parenti, Rene Sobiecki, Hans Nørgaard Hansen
Publié dans: Proceedings of the 16th euspen International Conference & Exhibition, 2016
Éditeur: euspen

Research on hybrid laser-electrochemical micromachining : Prototype machine-tool development and test-machining results

Auteurs: Krishna Kumar Saxena, Jun Qian, Dmoniek Reynaerts
Publié dans: Proceedings of the 19th euspen International Conference & Exhibition, 2019, Page(s) 476-479
Éditeur: euspen

Micromilling of Metallic Feedstock Produced by Extrusion Additive Manufacturing

Auteurs: Kuriakose Sandeep, Parenti Paolo, Cataldo Salvatore, Annoni Massimiliano
Publié dans: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 125-128, ISBN 978-981-11-2728-1
Éditeur: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_92

Debinding and Pre-Sintering of High Aspect Ratio Micro Bi-Lumen Tubes Produced by Extrusion of 17-4PH Feedstock

Auteurs: Kuriakose, Sandeep; Cataldo, Salvatore; Parenti, Paolo; Annoni, MASSIMILIANO PIETRO GIOVANNI
Publié dans: Proceeding of 3rd World Congress on Micro and Nano Manufacturing, Numéro Proceeding of 3rd World Congress on Micro and Nano Manufacturing, 2019
Éditeur: 4M Association, the International Institution for Micro Manufacturing (I2M2) and the International Forum on Micro Manufacturing (IFMM)

Effect of Feedstock Properties on Extrusion of High Aspect Ratio Micro Bi-Lumen Tubes

Auteurs: Kuriakose, Sandeep; Annoni, MASSIMILIANO PIETRO GIOVANNI
Publié dans: 3rd World Congress on Micro and Nano Manufacturing, Numéro 3rd World Congress on Micro and Nano Manufacturing, 2019
Éditeur: 4M Association, the International Institution for Micro Manufacturing (I2M2) and the International Forum on Micro Manufacturing (IFMM)

Investigation on the micro injection molding process of an overmolded multi-material micro component

Auteurs: Federico Baruffi, Matteo Calaon, Guido Tosello, René Elsborg
Publié dans: Proceedings of the 2017 World Congress on Micro and Nano Manufacturing, Numéro Proceedings of the 2017 World Congress on Micro and Nano Manufacturing, 2017, Page(s) 5 pages
Éditeur: 4M Association

Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steel

Auteurs: Ajeet Singh Rajput, Henning Zeidler, Andreas Schubert
Publié dans: Proceedings of the 17th international conference of the european society for precision engineering and nanotechnology, 2017, Page(s) 193-194, ISBN 978-0-9957751-0-7
Éditeur: euspen

Application of Laser Scanning as a Pre-machining metrology technique in Jet-ECM

Auteurs: Matin Yahyavi Zanjani, Henning Zeidler, André Martin, Andreas Schubert
Publié dans: Proceedings of the 17th international conference of the european society for precision engineering and nanotechnology, 2017, Page(s) 185-186, ISBN 978-0-9957751-0-7
Éditeur: euspen

Hydrophobicity of Pyramid Structures Fabricated by Micro Milling

Auteurs: Yukui Cai, Wenlong Chang, Xichun Luo, Yi Qin
Publié dans: Proceedings of 2017 World Congress on Micro and Nano Manufacturing: A Joint Conference of ICOMM/4M/IFMM, 2017
Éditeur: 4M Association

Influence of variotherm injection moulding on the flow length of a micro part

Auteurs: Antonio Luca, Andreas Menten, Carla Flosky, Oltmann Riemer
Publié dans: 2017 World Congress on Micro and Nano Manufacturing, 2017
Éditeur: ICOMM/4M/IFMM

Analysis of mould design affecting the filling behaviour of an injection moulded micro part

Auteurs: Antonio Luca, Oltmann Riemer, Carla Flosky
Publié dans: euspen’s 17th International Conference & Exhibition, Hannover, DE, May 2017, 2017
Éditeur: euspen

Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component

Auteurs: Federico Baruffi, Matteo Calaon, Guido Tosello, Hans N. Hansen, Manfred Prantl, Nathan Miller
Publié dans: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, Numéro 2017, 2017, Page(s) pp. 495-496, ISBN 9780-995775107
Éditeur: European Society for Precision Engineering and Nanotechnology

Definition of the reference point in micro-EDM drilling of a wire drawing die

Auteurs: Bellotti, Mattia Saxena, Krishna Kumar Xueling, Liu Nabuurs, Marius Qian, Jun Reynaerts, Dominiek
Publié dans: Proceedings of the WCMNM 2017, Numéro 361-364, 2017
Éditeur: World Congress on Micro and Nano Manufacturing location:Kaohsiung (Taiwan) date:27-30 March 2017

Green-state micromilling of AISI316L feedstock

Auteurs: Parenti, Paolo; Kuriakose, Sandeep; Mussi, Valerio; Strano, Matteo; Annoni, Massimiliano
Publié dans: Proceedings of World Congress on Micro and Nano Manufacturing, Numéro 1, 2017, Page(s) 369-372, ISBN 978-986-05-2101-6
Éditeur: World Congress on Micro and Nano Manufacturing

Experimental Study on Jet Electrochemical Machining of Intersecting Single Grooves

Auteurs: Matin Yahyavi Zanjani, PD Dr.-Ing. habil. Dipl.-Phys. Mattias Hackert‐Oschätzchen, André Martin, Prof. Dr.-Ing. Andreas Schubert
Publié dans: Euspen Special Interest Group Meeting Micro / NanoManufacturing, 8th and 9th November 2017, 2017
Éditeur: European Society for Precision Engineering and Nanotechnology (Euspen)

Effects of micro-injection moulding process parameters on accuracy and precision of thermoplastic elastomer micro rings

Auteurs: Federico Baruffi, Matteo Calaon, Guido Tosello
Publié dans: Precision Engineering, Numéro 51, 2018, Page(s) 353-361, ISSN 0141-6359
Éditeur: Elsevier BV
DOI: 10.1016/j.precisioneng.2017.09.006

Lubricant Influence on the Ejection and Roughness of In-Die Electro Sinter Forged Ti-Discs

Auteurs: Emanuele Cannella, Chris Valentin Nielsen
Publié dans: Key Engineering Materials, Numéro 767, 2018, Page(s) 171-178, ISSN 1662-9795
Éditeur: Trans Tech Publications Inc.
DOI: 10.4028/www.scientific.net/KEM.767.171

Micro-Injection Moulding In-Line Quality Assurance Based on Product and Process Fingerprints

Auteurs: Federico Baruffi, Matteo Calaon, Guido Tosello
Publié dans: Micromachines, Numéro 9/6, 2018, Page(s) 293, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi9060293

Electro Sinter Forging (ESF)

Auteurs: Emanuele Cannella, Chris Valentin Nielsen, Niels Bay
Publié dans: Micromachines, Numéro 10/4, 2019, Page(s) 218, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10040218

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Auteurs: Yang Zhang, David Bue Pedersen, Michael Mischkot, Matteo Calaon, Federico Baruffi, Guido Tosello
Publié dans: Journal of Visualized Experiments, Numéro 138, 2018, ISSN 1940-087X
Éditeur: MYJoVE Corporation
DOI: 10.3791/57335

Comparison of micro and conventional injection moulding based on process precision and accuracy

Auteurs: Federico Baruffi, Alessandro Charalambis, Matteo Calaon, René Elsborg, Guido Tosello
Publié dans: Procedia CIRP, Numéro 75, 2018, Page(s) 149-154, ISSN 2212-8271
Éditeur: Elsevier BV
DOI: 10.1016/j.procir.2018.04.046

Process Fingerprint in Micro-EDM Drilling

Auteurs: Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Publié dans: Micromachines, Numéro 10/4, 2019, Page(s) 240, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10040240

Fast Mesoscale Texturing by Multi-Electrode Scanning Micro Electrochemical Flow Cell

Auteurs: Cheng Guo, Krishna Kumar Saxena, Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Publié dans: Procedia CIRP, Numéro 68, 2018, Page(s) 741-745, ISSN 2212-8271
Éditeur: Elsevier BV
DOI: 10.1016/j.procir.2017.12.130

Characterization of Circumferential Surface Roughness of Micro-EDMed Holes Using Replica Technology

Auteurs: Krishna Kumar Saxena, Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Publié dans: Procedia CIRP, Numéro 68, 2018, Page(s) 582-587, ISSN 2212-8271
Éditeur: Elsevier BV
DOI: 10.1016/j.procir.2017.12.118

Enhancement of the Micro-EDM Process for Drilling Through-holes

Auteurs: Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Publié dans: Procedia CIRP, Numéro 68, 2018, Page(s) 610-615, ISSN 2212-8271
Éditeur: Elsevier BV
DOI: 10.1016/j.procir.2017.12.123

A review on process capabilities of electrochemical micromachining and its hybrid variants

Auteurs: Krishna Kumar Saxena, Jun Qian, Dominiek Reynaerts
Publié dans: International Journal of Machine Tools and Manufacture, Numéro 127, 2018, Page(s) 28-56, ISSN 0890-6955
Éditeur: Elsevier BV
DOI: 10.1016/j.ijmachtools.2018.01.004

Process Control in Jet Electrochemical Machining of Stainless Steel through Inline Metrology of Current Density

Auteurs: Matin Yahyavi Zanjani, Matthias Hackert-Oschätzchen, André Martin, Gunnar Meichsner, Jan Edelmann, Andreas Schubert
Publié dans: Micromachines, Numéro 10/4, 2019, Page(s) 261, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10040261

Product/Process Fingerprint in Micro Manufacturing

Auteurs: Guido Tosello
Publié dans: Micromachines, Numéro 10/5, 2019, Page(s) 340, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10050340

Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology

Auteurs: Igor Danilov, Matthias Hackert-Oschätzchen, Mike Zinecker, Gunnar Meichsner, Jan Edelmann, Andreas Schubert
Publié dans: Micromachines, Numéro 10/3, 2019, Page(s) 214, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10030214

Characterisation of zirconia-based ceramics after micro-grinding

Auteurs: Pablo Fook, Oltmann Riemer
Publié dans: Journal of Micro and Nano-Manufacturing, 2019, ISSN 2166-0468
Éditeur: ASME
DOI: 10.1115/1.4043693

Structuring of Bioceramics by Micro-Grinding for Dental Implant Applications

Auteurs: Pablo Fook, Daniel Berger, Oltmann Riemer, Bernhard Karpuschewski
Publié dans: Micromachines, Numéro 10/5, 2019, Page(s) 312, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10050312

Analysis of the Downscaling Effect and Definition of the Process Fingerprints in Micro Injection of Spiral Geometries

Auteurs: Antonio Luca, Oltmann Riemer
Publié dans: Micromachines, Numéro 10/5, 2019, Page(s) 335, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10050335

Superhydrophobicity of microstructured surfaces on zirconia by nanosecond pulsed laser

Auteurs: Yukui Cai, Wenlong Chang, Xichun Luo, Yi Qin
Publié dans: Journal of Micromanufacturing, Numéro 2/1, 2019, Page(s) 5-14, ISSN 2516-5984
Éditeur: SAGE publishing
DOI: 10.1177/2516598418799933

Product and Process Fingerprint for Nanosecond Pulsed Laser Ablated Superhydrophobic Surface

Auteurs: Yukui Cai, Xichun Luo, Zhanqiang Liu, Yi Qin, Wenlong Chang, Yazhou Sun
Publié dans: Micromachines, Numéro 10/3, 2019, Page(s) 177, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10030177

A single-step fabrication approach for development of antimicrobial surfaces

Auteurs: Yukui Cai, Xichun Luo, Michelle Maclean, Yi Qin, Mark Duxbury, Fei Ding
Publié dans: Journal of Materials Processing Technology, Numéro 271, 2019, Page(s) 249-260, ISSN 0924-0136
Éditeur: Elsevier BV
DOI: 10.1016/j.jmatprotec.2019.04.012

Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser

Auteurs: Yukui Cai, Wenlong Chang, Xichun Luo, Ana M.L. Sousa, King Hang Aaron Lau, Yi Qin
Publié dans: Precision Engineering, Numéro 52, 2018, Page(s) 266-275, ISSN 0141-6359
Éditeur: Elsevier BV
DOI: 10.1016/j.precisioneng.2018.01.004

Green-State Micromilling of Additive Manufactured AISI316 L

Auteurs: Sandeep Kuriakose, Paolo Parenti, Salvatore Cataldo, Massimiliano Annoni
Publié dans: Journal of Micro and Nano-Manufacturing, Numéro 7/1, 2019, ISSN 2166-0468
Éditeur: ASME
DOI: 10.1115/1.4042977

Process investigation and mechanical properties of electro sinter forged (ESF) titanium discs

Auteurs: Emanuele Cannella, Chris Valentin Nielsen, Niels Bay
Publié dans: The International Journal of Advanced Manufacturing Technology, 2019, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-019-03972-z

Mechanical durability of hydrophobic surfaces fabricated by injection moulding of laser-induced textures

Auteurs: Jean-Michel Romano, Mert Gulcur, Antonio Garcia-Giron, Elena Martinez-Solanas, Ben R. Whiteside, Stefan S. Dimov
Publié dans: Applied Surface Science, Numéro 476, 2019, Page(s) 850-860, ISSN 0169-4332
Éditeur: Elsevier BV
DOI: 10.1016/j.apsusc.2019.01.162

3D Multiphysics Simulation of Jet Electrochemical Machining of Intersecting Line Removals

Auteurs: Raphael Paul, Matthias Hackert-Oschätzchen, Igor Danilov, Matin Yahyavi Zanjani, Andreas Schubert
Publié dans: Procedia CIRP, Numéro 82, 2019, Page(s) 196-201, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2019.04.154

Dynamic behaviours of water droplets impacting on laser ablated surfaces

Auteurs: Yukui Cai, Xichun Luo, Yankang Tian, Rashed Md. Murad Hasan, Wenlong Chang, Yi Qin
Publié dans: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Numéro 580, 2019, Page(s) 123743, ISSN 0927-7757
Éditeur: Elsevier BV
DOI: 10.1016/j.colsurfa.2019.123743

A Sequential Process for Manufacturing Nature-Inspired Anisotropic Superhydrophobic Structures on AISI 316L Stainless Steel

Auteurs: Yukui Cai, Zongwei Xu, Hong Wang, King Hang Aaron Lau, Fei Ding, Jining Sun, Yi Qin, Xichun Luo
Publié dans: Nanomanufacturing and Metrology, Numéro 2/3, 2019, Page(s) 148-159, ISSN 2520-811X
Éditeur: Springer
DOI: 10.1007/s41871-019-00046-2

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Auteurs: Ali Davoudinejad, Yukui Cai, David Bue Pedersen, Xichun Luo, Guido Tosello
Publié dans: Materials & Design, Numéro 176, 2019, Page(s) 107839, ISSN 0264-1275
Éditeur: Elsevier BV
DOI: 10.1016/j.matdes.2019.107839

On the Application of Replica Molding Technology for the Indirect Measurement of Surface and Geometry of Micromilled Components

Auteurs: Federico Baruffi, Paolo Parenti, Francesco Cacciatore, Massimiliano Annoni, Guido Tosello
Publié dans: Micromachines, Numéro 8/6, 2017, Page(s) 195, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi8060195

Designing a Tool System for Lowering Friction during the Ejection of In-Die Sintered Micro Gears

Auteurs: Emanuele Cannella, Emil Nielsen, Alessandro Stolfi
Publié dans: Micromachines, Numéro 8/7, 2017, Page(s) 214, ISSN 2072-666X
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi8070214

Livrables

Publications

Partager cette page

Télécharger