European Training Network on “Process Fingerprint for Zero-defect Net-shape MICROMANufacturing”

Rezultaty

MICROMAN micro manufacturing handbook
ESR scientific publications
MICROMAN Session at Multi-Material Micro Manuf. Conf. (4M/ICOMM)

Conference

ESRs open positions advertisement

Videos from selected technological workshops

Videos from selected technological workshops Deadlines: M48

MICROMAN public project website and MICROMAN LinkedIn profile

ADM

ESR PhD degrees

ESR PhD degrees --- For those ESR not finishing their PhD project within the terms of the MICROMAN project (D5.5 and milestone M9) (and that therefore cannot be awarded the PhD degree at M48) the MICROMAN European Micro Manufacturing Academy ‘Certified Micro Manufacturing Doctorate Engineer’ title will be awarded since all ESRs will have completerd the MICROMAN training (see milestone M10)

Publikacje

Evaluation of On-Machine Gap Measurement Strategies in Jet-Electrochemical Machining

Autorzy: Matin Yahyavi Zanjani, PD Dr.-Ing. habil. Matthias Hackert-Oschätzchen, André Martin, Prof. Dr.-Ing. Andreas Schubert
Opublikowane w: Proceedings of International Symposium on Electrochemical Machining Technology, 2017, 2017, Strona(/y) 94-100
Wydawca: International Symposium on Electrochemical Machining Technology

Electro sinter forging of titanium disks

Autorzy: Emanuele Cannella, Chris Valentin Nielsen, Niels Oluf Bay
Opublikowane w: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, 2017
Wydawca: euspen

Tool design and materials for electro sinter forging (ESF)

Autorzy: Emanuele Cannella, Chris Valentin Nielsen
Opublikowane w: Proceedings of the 8th JSTP International Seminar on Precision Forging, 2018, Strona(/y) 93-96
Wydawca: Japan Society for Technology of Plasticity

Ejection force analysis of sintered aluminium micro gears using a shrink-fit die principle

Autorzy: Emanuele Cannella, Emil Krabbe Nielsen, Mogens Arentoft
Opublikowane w: Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016), 2016, Strona(/y) pp. 41- 44
Wydawca: 4M Association
DOI: 10.3850/978-981-11-0749-8694

Process Fingerprint Concept for Micro Grinding of Dental Ceramic Implants

Autorzy: Pablo Fook, Carla Flosky, Oltmann Riemer
Opublikowane w: Kolloquium Mikroproduktion, 2017, Strona(/y) 163-170, ISBN 978-3-933762-56-6
Wydawca: BIAS Verlag, 2017

Process/Product Fingerprint concept for micro injection moulding of a medical micro component

Autorzy: Antonio Luca, Oltmann Riemer
Opublikowane w: Proceedings of the Kolloquium Mikroproduktion, 2017, Strona(/y) 77-82, ISBN 978-3-933762-56-6
Wydawca: BIAS Verlag, 2017

Prediction of micro-sized flash using micro-injection moulding process simulations

Autorzy: Federico Baruffi, Matteo Calaon, Guido Tosello
Opublikowane w: Proceedings of the 18th International Conference & Exhibition of euspen, Numer 2018, 2018, Strona(/y) 263-264, ISBN 978-0-9957751-2-1
Wydawca: European Society for Precision Engineering and Nanotechnology

Micro injection moulding process optimization of an ultra-small POM three-dimensional component

Autorzy: Federico Baruffi, Matteo Calaon, Guido Tosello
Opublikowane w: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, Numer 2017, 2017
Wydawca: euspen

On the performance of micro injection moulding process simulations of TPE micro rings

Autorzy: Federico Baruffi, Matteo Calaon, Guido Tosello
Opublikowane w: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, Numer 2017, 2017
Wydawca: euspen

Process parameter influence on Electro-sinter-forging (ESF) of titanium discs

Autorzy: Emanuele Cannella; Chris Valentin Nielsen; Niels Bay
Opublikowane w: Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology, 2018
Wydawca: euspen 2018

Micro product and process fingerprints for zero-defect net-shape micromanufacturing

Autorzy: Guido Tosello, Mert Gulcur, Ben Whiteside, Phil Coates, Antonio Luca, Pablo Fook, Oltmann Riemer, Igor Danilov, Matin Yahyavi Zanjani, Matthias Hackert-Oschätzchen, Andreas Schubert, Federico Baruffi, Soufian Ben Achour, Matteo Calaon, Chris Valentin Nielsen, Giuliano Bissacco, Anette Rasmussen, Mattia Bellotti, Krishna Kumar Saxena, Jun Qian, Dominiek Reynaerts, Teguh Santoso, Sandeep Kuriakose,
Opublikowane w: Proceedings of the 19th International Conference of euspen, 2019, Strona(/y) 98-99
Wydawca: euspen

On the Applicability of Micro-injection Moulding Simulations to Multivariate Integrated Process/Product Optimization

Autorzy: F. Baruffi, M. Calaon, G. Tosello, R. Elsborg
Opublikowane w: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Strona(/y) 171-174, ISBN 978-981-11-2728-1
Wydawca: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_18

Thermal characterization of a micro polishing machine and effect on path strategy compensation

Autorzy: Soufian Ben Achour, Alessandro Checchi, Giuliano Bissacco, Leonardo De Chiffre, Hans Nørgaard Hansen
Opublikowane w: Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology, 2019, Strona(/y) 446-447
Wydawca: euspen

Applicability of Acoustic Emission monitoring to micro polishing

Autorzy: Soufian Ben Achour, Giuliano Bissacco, Leonardo De Chiffre
Opublikowane w: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, 2018, Strona(/y) 385-356
Wydawca: euspen

Twin-wire electrical discharge grinding for shaping tapered micro rods

Autorzy: Yan-Qing Wang, Mattia Bellotti, jun Qian, Dominiek Reynaerts,
Opublikowane w: Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology, 2019, Strona(/y) 444-445
Wydawca: euspen

Wire electrical discharge grinding of micro rods for bonding-free fabrication of soft pneumatic microactuators

Autorzy: Mattia Bellotti, Edoardo Milana, Benjamin Gorissen, Jun Qian, Dominiek Reynaerts
Opublikowane w: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology,, 2018, Strona(/y) 413-414
Wydawca: euspen

Transient Simulation of the Removal Process in Plasma Electrolytic Polishing of Stainless Steel

Autorzy: Igor Danilov, Matthias Hackert-Oschätzchen, I. Schaarsschmidt, Andreas Schubert
Opublikowane w: COMSOL conference, 2018, ISBN 978-0-9910001-6-6
Wydawca: COMSOL

In-line monitoring of micro structured surface replication in micro-injection moulding

Autorzy: Federico Baruffi, Mert Gulcur, Matteo Calaon, Ben Whiteside, Guido Tosello
Opublikowane w: Abstract presented at the euspen Special Interest Group on Structured and Freeform Surfaces, 2018
Wydawca: euspen

Surface integrity investigation of ground ceramic workpieces for biomedical applications

Autorzy: Pablo Fook, Oltmann Riemer, Bernhard Karpuschewski
Opublikowane w: Proceedings of the 19th euspen International Conference & Exhibition, 2019
Wydawca: euspen

Process and product fingerprint concept for microinjection moulding of thermoplastic microneedle arrays

Autorzy: Mert Gulcur, Ben Whiteside, Pablo Fook, Kai Rickens, Oltmann Riemer
Opublikowane w: Proceedings of the euspen 19th International Conference & Exhibition, 2019
Wydawca: euspen

Surface and subsurface characterisation of bioceramic workpieces machined by micro-grinding

Autorzy: Pablo Fook, Kai Rickens, Oltmann Riemer
Opublikowane w: Proceedings of the 18th euspen International Conference & Exhibition, 2018
Wydawca: euspen

Characterisation of Zirconia-based Ceramics after Micro-Grinding

Autorzy: Pablo Fook, Oltmann Riemer
Opublikowane w: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Strona(/y) 175-178, ISBN 978-981-11-2728-1
Wydawca: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_31

Effect of thermal conductivity on the achievable flow length of micro injection moulded parts

Autorzy: Antonio Luca, Carla Flosky, Oltmann Riemer
Opublikowane w: Proceedings of the 19th euspen International Conference & Exhibition, 2019, Strona(/y) 398-399
Wydawca: euspen

Prediction of shrinkage and warpage effects of a micro component via injection molding process simulation

Autorzy: Antonio Luca, Henrik Siesenis, Oltmann Riemer
Opublikowane w: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Strona(/y) 167-170, ISBN 978-981-11-2728-1
Wydawca: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_08

A hybrid laser ablation and chemical etching process for manufacturing nature-inspired anisotropic superhydrophobic structures

Autorzy: Yukui Cai, Xichun Luo, Zongwei Xu, King Hang Aaron Lau, Fei Ding, Yi Qin
Opublikowane w: Proceedings of the 19th euspen International Conference & Exhibition, 2019
Wydawca: euspen

Simulation Study of Dynamic Behaviour of Water Droplet on Laser Machined Surface

Autorzy: Yukui Cai, Xichun Luo
Opublikowane w: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Strona(/y) 179-182, ISBN 978-981-11-2728-1
Wydawca: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_94

Fabrication of hydrophobic structures by nanosecond pulse laser

Autorzy: Yukui Cai, Ana Sousa, King Hang Aaron Lau, Wenlong Chang, Xichun Luo
Opublikowane w: 15th International Conference on Manufacturing Research, 2017
Wydawca: IOS Press

On-machine optical surface topography measurement sensor based on focus variation

Autorzy: Subbareddy Darukumalli, Teguh Santoso, Wahyudin Syam, Franz Helmli, Richard Leach
Opublikowane w: Proceedings of the 19th euspen International Conference & Exhibition, 2019
Wydawca: euspen

Investigating the effect of the feedstock shape on ultrasonic microinjection moulding

Autorzy: Mert Gulcur, Ben Whiteside, Phil Coates
Opublikowane w: Proceedings of the ANTEC conference 2019, 2019
Wydawca: SPE

Replication of laser structured surfaces using ultrasonic micro-injection moulding

Autorzy: Mert Gulcur, Ben Whiteside, Pavel Penchev, Jean-Michel Romano,
Opublikowane w: Abstract presented at the euspen Special Interest Group on Structured and Freeform Surfaces, 2018
Wydawca: euspen

Process fingerprinting for optimized production of thermoplastic microneedle arrays using ultrasonic microinjection moulding

Autorzy: Mert Gulcur, Ben Whiteside
Opublikowane w: Abstract for P70 – Polymer Engineering International/UK-China AMRI Research Workshop, 2018
Wydawca: University of Bradford

Ultrasonic injection moulding of polypropylene and thermal visualization of the process using bespoke injection mould tool

Autorzy: Mert Gulcur, Ben Whiteside, Karthick Nair, Max Babenko, Phil Coates
Opublikowane w: Proceedings of the 18th euspen International Conference & Exhibition, 2018
Wydawca: euspen

Effect of initial material shape and compaction routes on ultrasonic injection moulding of thermoplastic materials

Autorzy: Mert Gulcur, Ben Whiteside, Max Babenko
Opublikowane w: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, 2017
Wydawca: euspen

Laser confocal microscope noise evaluation on injection compression moulded (ICM) transparent polymer Fresnel lenses

Autorzy: Dario Loaldi, Matteo Calaon, Danilo Quagliotti, Federico Baruffi, Paolo Parenti, Guido Tosello, Massimiliano Annoni
Opublikowane w: Proceedings of the 17th euspen International Conference & Exhibition, 2017, Strona(/y) 357-358
Wydawca: euspen

Correction of Systematic Behaviour in Topographical Surface Analysis

Autorzy: D. Quagliotti, F. Baruffi, G. Tosello, S. Gasparin, M. Annoni, P. Parenti, R. Sobiecki, H. N. Hansen
Opublikowane w: 4M/IWMF2016 The Global Conference on Micro Manufacture : Incorporating the 11th International Conference on Multi-Material Micro Manufacture (4M) and the 10th International Workshop on Microfactories (IWMF), 2016, Strona(/y) 277-280, ISBN 978-981-11-0749-8
Wydawca: Research Publishing Services
DOI: 10.3850/978-981-11-0749-8_738

Investigation on the Micromilled Surface Characterization Through Replica Technology

Autorzy: F. Baruffi, P. Parenti, F. Cacciatore, M. Annoni, G. Tosello
Opublikowane w: 4M/IWMF2016 The Global Conference on Micro Manufacture : Incorporating the 11th International Conference on Multi-Material Micro Manufacture (4M) and the 10th International Workshop on Microfactories (IWMF), 2016, Strona(/y) 273-276, ISBN 978-981-11-0749-8
Wydawca: Research Publishing Services
DOI: 10.3850/978-981-11-0749-8_726

Performance verification of focus variation and confocal microscopes measuring tilted ultra-fine surfaces

Autorzy: Danilo Quagliotti, Federico Baruffi, Guido Tosello, Stefania Gasparin, Massimiliano Annoni, Paolo Parenti, Rene Sobiecki, Hans Nørgaard Hansen
Opublikowane w: Proceedings of the 16th euspen International Conference & Exhibition, 2016
Wydawca: euspen

Research on hybrid laser-electrochemical micromachining : Prototype machine-tool development and test-machining results

Autorzy: Krishna Kumar Saxena, Jun Qian, Dmoniek Reynaerts
Opublikowane w: Proceedings of the 19th euspen International Conference & Exhibition, 2019, Strona(/y) 476-479
Wydawca: euspen

Micromilling of Metallic Feedstock Produced by Extrusion Additive Manufacturing

Autorzy: Kuriakose Sandeep, Parenti Paolo, Cataldo Salvatore, Annoni Massimiliano
Opublikowane w: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Strona(/y) 125-128, ISBN 978-981-11-2728-1
Wydawca: Research Publishing Services
DOI: 10.3850/978-981-11-2728-1_92

Debinding and Pre-Sintering of High Aspect Ratio Micro Bi-Lumen Tubes Produced by Extrusion of 17-4PH Feedstock

Autorzy: Kuriakose, Sandeep; Cataldo, Salvatore; Parenti, Paolo; Annoni, MASSIMILIANO PIETRO GIOVANNI
Opublikowane w: Proceeding of 3rd World Congress on Micro and Nano Manufacturing, Numer Proceeding of 3rd World Congress on Micro and Nano Manufacturing, 2019
Wydawca: 4M Association, the International Institution for Micro Manufacturing (I2M2) and the International Forum on Micro Manufacturing (IFMM)

Effect of Feedstock Properties on Extrusion of High Aspect Ratio Micro Bi-Lumen Tubes

Autorzy: Kuriakose, Sandeep; Annoni, MASSIMILIANO PIETRO GIOVANNI
Opublikowane w: 3rd World Congress on Micro and Nano Manufacturing, Numer 3rd World Congress on Micro and Nano Manufacturing, 2019
Wydawca: 4M Association, the International Institution for Micro Manufacturing (I2M2) and the International Forum on Micro Manufacturing (IFMM)

Investigation on the micro injection molding process of an overmolded multi-material micro component

Autorzy: Federico Baruffi, Matteo Calaon, Guido Tosello, René Elsborg
Opublikowane w: Proceedings of the 2017 World Congress on Micro and Nano Manufacturing, Numer Proceedings of the 2017 World Congress on Micro and Nano Manufacturing, 2017, Strona(/y) 5 pages
Wydawca: 4M Association

Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steel

Autorzy: Ajeet Singh Rajput, Henning Zeidler, Andreas Schubert
Opublikowane w: Proceedings of the 17th international conference of the european society for precision engineering and nanotechnology, 2017, Strona(/y) 193-194, ISBN 978-0-9957751-0-7
Wydawca: euspen

Application of Laser Scanning as a Pre-machining metrology technique in Jet-ECM

Autorzy: Matin Yahyavi Zanjani, Henning Zeidler, André Martin, Andreas Schubert
Opublikowane w: Proceedings of the 17th international conference of the european society for precision engineering and nanotechnology, 2017, Strona(/y) 185-186, ISBN 978-0-9957751-0-7
Wydawca: euspen

Hydrophobicity of Pyramid Structures Fabricated by Micro Milling

Autorzy: Yukui Cai, Wenlong Chang, Xichun Luo, Yi Qin
Opublikowane w: Proceedings of 2017 World Congress on Micro and Nano Manufacturing: A Joint Conference of ICOMM/4M/IFMM, 2017
Wydawca: 4M Association

Influence of variotherm injection moulding on the flow length of a micro part

Autorzy: Antonio Luca, Andreas Menten, Carla Flosky, Oltmann Riemer
Opublikowane w: 2017 World Congress on Micro and Nano Manufacturing, 2017
Wydawca: ICOMM/4M/IFMM

Analysis of mould design affecting the filling behaviour of an injection moulded micro part

Autorzy: Antonio Luca, Oltmann Riemer, Carla Flosky
Opublikowane w: euspen’s 17th International Conference & Exhibition, Hannover, DE, May 2017, 2017
Wydawca: euspen

Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component

Autorzy: Federico Baruffi, Matteo Calaon, Guido Tosello, Hans N. Hansen, Manfred Prantl, Nathan Miller
Opublikowane w: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, Numer 2017, 2017, Strona(/y) pp. 495-496, ISBN 9780-995775107
Wydawca: European Society for Precision Engineering and Nanotechnology

Definition of the reference point in micro-EDM drilling of a wire drawing die

Autorzy: Bellotti, Mattia Saxena, Krishna Kumar Xueling, Liu Nabuurs, Marius Qian, Jun Reynaerts, Dominiek
Opublikowane w: Proceedings of the WCMNM 2017, Numer 361-364, 2017
Wydawca: World Congress on Micro and Nano Manufacturing location:Kaohsiung (Taiwan) date:27-30 March 2017

Green-state micromilling of AISI316L feedstock

Autorzy: Parenti, Paolo; Kuriakose, Sandeep; Mussi, Valerio; Strano, Matteo; Annoni, Massimiliano
Opublikowane w: Proceedings of World Congress on Micro and Nano Manufacturing, Numer 1, 2017, Strona(/y) 369-372, ISBN 978-986-05-2101-6
Wydawca: World Congress on Micro and Nano Manufacturing

Experimental Study on Jet Electrochemical Machining of Intersecting Single Grooves

Autorzy: Matin Yahyavi Zanjani, PD Dr.-Ing. habil. Dipl.-Phys. Mattias Hackert‐Oschätzchen, André Martin, Prof. Dr.-Ing. Andreas Schubert
Opublikowane w: Euspen Special Interest Group Meeting Micro / NanoManufacturing, 8th and 9th November 2017, 2017
Wydawca: European Society for Precision Engineering and Nanotechnology (Euspen)

Effects of micro-injection moulding process parameters on accuracy and precision of thermoplastic elastomer micro rings

Autorzy: Federico Baruffi, Matteo Calaon, Guido Tosello
Opublikowane w: Precision Engineering, Numer 51, 2018, Strona(/y) 353-361, ISSN 0141-6359
Wydawca: Elsevier BV
DOI: 10.1016/j.precisioneng.2017.09.006

Lubricant Influence on the Ejection and Roughness of In-Die Electro Sinter Forged Ti-Discs

Autorzy: Emanuele Cannella, Chris Valentin Nielsen
Opublikowane w: Key Engineering Materials, Numer 767, 2018, Strona(/y) 171-178, ISSN 1662-9795
Wydawca: Trans Tech Publications Inc.
DOI: 10.4028/www.scientific.net/KEM.767.171

Micro-Injection Moulding In-Line Quality Assurance Based on Product and Process Fingerprints

Autorzy: Federico Baruffi, Matteo Calaon, Guido Tosello
Opublikowane w: Micromachines, Numer 9/6, 2018, Strona(/y) 293, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi9060293

Electro Sinter Forging (ESF)

Autorzy: Emanuele Cannella, Chris Valentin Nielsen, Niels Bay
Opublikowane w: Micromachines, Numer 10/4, 2019, Strona(/y) 218, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10040218

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Autorzy: Yang Zhang, David Bue Pedersen, Michael Mischkot, Matteo Calaon, Federico Baruffi, Guido Tosello
Opublikowane w: Journal of Visualized Experiments, Numer 138, 2018, ISSN 1940-087X
Wydawca: MYJoVE Corporation
DOI: 10.3791/57335

Comparison of micro and conventional injection moulding based on process precision and accuracy

Autorzy: Federico Baruffi, Alessandro Charalambis, Matteo Calaon, René Elsborg, Guido Tosello
Opublikowane w: Procedia CIRP, Numer 75, 2018, Strona(/y) 149-154, ISSN 2212-8271
Wydawca: Elsevier BV
DOI: 10.1016/j.procir.2018.04.046

Process Fingerprint in Micro-EDM Drilling

Autorzy: Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Opublikowane w: Micromachines, Numer 10/4, 2019, Strona(/y) 240, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10040240

Fast Mesoscale Texturing by Multi-Electrode Scanning Micro Electrochemical Flow Cell

Autorzy: Cheng Guo, Krishna Kumar Saxena, Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Opublikowane w: Procedia CIRP, Numer 68, 2018, Strona(/y) 741-745, ISSN 2212-8271
Wydawca: Elsevier BV
DOI: 10.1016/j.procir.2017.12.130

Characterization of Circumferential Surface Roughness of Micro-EDMed Holes Using Replica Technology

Autorzy: Krishna Kumar Saxena, Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Opublikowane w: Procedia CIRP, Numer 68, 2018, Strona(/y) 582-587, ISSN 2212-8271
Wydawca: Elsevier BV
DOI: 10.1016/j.procir.2017.12.118

Enhancement of the Micro-EDM Process for Drilling Through-holes

Autorzy: Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Opublikowane w: Procedia CIRP, Numer 68, 2018, Strona(/y) 610-615, ISSN 2212-8271
Wydawca: Elsevier BV
DOI: 10.1016/j.procir.2017.12.123

A review on process capabilities of electrochemical micromachining and its hybrid variants

Autorzy: Krishna Kumar Saxena, Jun Qian, Dominiek Reynaerts
Opublikowane w: International Journal of Machine Tools and Manufacture, Numer 127, 2018, Strona(/y) 28-56, ISSN 0890-6955
Wydawca: Elsevier BV
DOI: 10.1016/j.ijmachtools.2018.01.004

Process Control in Jet Electrochemical Machining of Stainless Steel through Inline Metrology of Current Density

Autorzy: Matin Yahyavi Zanjani, Matthias Hackert-Oschätzchen, André Martin, Gunnar Meichsner, Jan Edelmann, Andreas Schubert
Opublikowane w: Micromachines, Numer 10/4, 2019, Strona(/y) 261, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10040261

Product/Process Fingerprint in Micro Manufacturing

Autorzy: Guido Tosello
Opublikowane w: Micromachines, Numer 10/5, 2019, Strona(/y) 340, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10050340

Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology

Autorzy: Igor Danilov, Matthias Hackert-Oschätzchen, Mike Zinecker, Gunnar Meichsner, Jan Edelmann, Andreas Schubert
Opublikowane w: Micromachines, Numer 10/3, 2019, Strona(/y) 214, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10030214

Characterisation of zirconia-based ceramics after micro-grinding

Autorzy: Pablo Fook, Oltmann Riemer
Opublikowane w: Journal of Micro and Nano-Manufacturing, 2019, ISSN 2166-0468
Wydawca: ASME
DOI: 10.1115/1.4043693

Structuring of Bioceramics by Micro-Grinding for Dental Implant Applications

Autorzy: Pablo Fook, Daniel Berger, Oltmann Riemer, Bernhard Karpuschewski
Opublikowane w: Micromachines, Numer 10/5, 2019, Strona(/y) 312, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10050312

Analysis of the Downscaling Effect and Definition of the Process Fingerprints in Micro Injection of Spiral Geometries

Autorzy: Antonio Luca, Oltmann Riemer
Opublikowane w: Micromachines, Numer 10/5, 2019, Strona(/y) 335, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10050335

Superhydrophobicity of microstructured surfaces on zirconia by nanosecond pulsed laser

Autorzy: Yukui Cai, Wenlong Chang, Xichun Luo, Yi Qin
Opublikowane w: Journal of Micromanufacturing, Numer 2/1, 2019, Strona(/y) 5-14, ISSN 2516-5984
Wydawca: SAGE publishing
DOI: 10.1177/2516598418799933

Product and Process Fingerprint for Nanosecond Pulsed Laser Ablated Superhydrophobic Surface

Autorzy: Yukui Cai, Xichun Luo, Zhanqiang Liu, Yi Qin, Wenlong Chang, Yazhou Sun
Opublikowane w: Micromachines, Numer 10/3, 2019, Strona(/y) 177, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10030177

A single-step fabrication approach for development of antimicrobial surfaces

Autorzy: Yukui Cai, Xichun Luo, Michelle Maclean, Yi Qin, Mark Duxbury, Fei Ding
Opublikowane w: Journal of Materials Processing Technology, Numer 271, 2019, Strona(/y) 249-260, ISSN 0924-0136
Wydawca: Elsevier BV
DOI: 10.1016/j.jmatprotec.2019.04.012

Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser

Autorzy: Yukui Cai, Wenlong Chang, Xichun Luo, Ana M.L. Sousa, King Hang Aaron Lau, Yi Qin
Opublikowane w: Precision Engineering, Numer 52, 2018, Strona(/y) 266-275, ISSN 0141-6359
Wydawca: Elsevier BV
DOI: 10.1016/j.precisioneng.2018.01.004

Green-State Micromilling of Additive Manufactured AISI316 L

Autorzy: Sandeep Kuriakose, Paolo Parenti, Salvatore Cataldo, Massimiliano Annoni
Opublikowane w: Journal of Micro and Nano-Manufacturing, Numer 7/1, 2019, ISSN 2166-0468
Wydawca: ASME
DOI: 10.1115/1.4042977

Process investigation and mechanical properties of electro sinter forged (ESF) titanium discs

Autorzy: Emanuele Cannella, Chris Valentin Nielsen, Niels Bay
Opublikowane w: The International Journal of Advanced Manufacturing Technology, 2019, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-019-03972-z

Mechanical durability of hydrophobic surfaces fabricated by injection moulding of laser-induced textures

Autorzy: Jean-Michel Romano, Mert Gulcur, Antonio Garcia-Giron, Elena Martinez-Solanas, Ben R. Whiteside, Stefan S. Dimov
Opublikowane w: Applied Surface Science, Numer 476, 2019, Strona(/y) 850-860, ISSN 0169-4332
Wydawca: Elsevier BV
DOI: 10.1016/j.apsusc.2019.01.162

3D Multiphysics Simulation of Jet Electrochemical Machining of Intersecting Line Removals

Autorzy: Raphael Paul, Matthias Hackert-Oschätzchen, Igor Danilov, Matin Yahyavi Zanjani, Andreas Schubert
Opublikowane w: Procedia CIRP, Numer 82, 2019, Strona(/y) 196-201, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2019.04.154

Dynamic behaviours of water droplets impacting on laser ablated surfaces

Autorzy: Yukui Cai, Xichun Luo, Yankang Tian, Rashed Md. Murad Hasan, Wenlong Chang, Yi Qin
Opublikowane w: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Numer 580, 2019, Strona(/y) 123743, ISSN 0927-7757
Wydawca: Elsevier BV
DOI: 10.1016/j.colsurfa.2019.123743

A Sequential Process for Manufacturing Nature-Inspired Anisotropic Superhydrophobic Structures on AISI 316L Stainless Steel

Autorzy: Yukui Cai, Zongwei Xu, Hong Wang, King Hang Aaron Lau, Fei Ding, Jining Sun, Yi Qin, Xichun Luo
Opublikowane w: Nanomanufacturing and Metrology, Numer 2/3, 2019, Strona(/y) 148-159, ISSN 2520-811X
Wydawca: Springer
DOI: 10.1007/s41871-019-00046-2

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Autorzy: Ali Davoudinejad, Yukui Cai, David Bue Pedersen, Xichun Luo, Guido Tosello
Opublikowane w: Materials & Design, Numer 176, 2019, Strona(/y) 107839, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/j.matdes.2019.107839

On the Application of Replica Molding Technology for the Indirect Measurement of Surface and Geometry of Micromilled Components

Autorzy: Federico Baruffi, Paolo Parenti, Francesco Cacciatore, Massimiliano Annoni, Guido Tosello
Opublikowane w: Micromachines, Numer 8/6, 2017, Strona(/y) 195, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi8060195

Designing a Tool System for Lowering Friction during the Ejection of In-Die Sintered Micro Gears

Autorzy: Emanuele Cannella, Emil Nielsen, Alessandro Stolfi
Opublikowane w: Micromachines, Numer 8/7, 2017, Strona(/y) 214, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi8070214

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz