Skip to main content

European Training Network on “Process Fingerprint for Zero-defect Net-shape MICROMANufacturing”

Deliverables

ESR PhD degrees

ESR PhD degrees --- For those ESR not finishing their PhD project within the terms of the MICROMAN project (D5.5 and milestone M9) (and that therefore cannot be awarded the PhD degree at M48) the MICROMAN European Micro Manufacturing Academy ‘Certified Micro Manufacturing Doctorate Engineer’ title will be awarded since all ESRs will have completerd the MICROMAN training (see milestone M10)

Searching for OpenAIRE data...

Publications

Evaluation of On-Machine Gap Measurement Strategies in Jet-Electrochemical Machining

Author(s): Matin Yahyavi Zanjani, PD Dr.-Ing. habil. Matthias Hackert-Oschätzchen, André Martin, Prof. Dr.-Ing. Andreas Schubert
Published in: Proceedings of International Symposium on Electrochemical Machining Technology, 2017, 2017, Page(s) 94-100

Electro sinter forging of titanium disks

Author(s): Emanuele Cannella, Chris Valentin Nielsen, Niels Oluf Bay
Published in: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, 2017

Tool design and materials for electro sinter forging (ESF)

Author(s): Emanuele Cannella, Chris Valentin Nielsen
Published in: Proceedings of the 8th JSTP International Seminar on Precision Forging, 2018, Page(s) 93-96

Ejection force analysis of sintered aluminium micro gears using a shrink-fit die principle

Author(s): Emanuele Cannella, Emil Krabbe Nielsen, Mogens Arentoft
Published in: Proceedings of the 11th International Conference on Multi-Material Micro Manufacture (4M2016) : co-organised with 10th International Workshop on Microfactories (IWMF2016), 2016, Page(s) pp. 41- 44
DOI: 10.3850/978-981-11-0749-8694

Process Fingerprint Concept for Micro Grinding of Dental Ceramic Implants

Author(s): Pablo Fook, Carla Flosky, Oltmann Riemer
Published in: Kolloquium Mikroproduktion, 2017, Page(s) 163-170

Process/Product Fingerprint concept for micro injection moulding of a medical micro component

Author(s): Antonio Luca, Oltmann Riemer
Published in: Proceedings of the Kolloquium Mikroproduktion, 2017, Page(s) 77-82

Prediction of micro-sized flash using micro-injection moulding process simulations

Author(s): Federico Baruffi, Matteo Calaon, Guido Tosello
Published in: Proceedings of the 18th International Conference & Exhibition of euspen, Issue 2018, 2018, Page(s) 263-264

Micro injection moulding process optimization of an ultra-small POM three-dimensional component

Author(s): Federico Baruffi, Matteo Calaon, Guido Tosello
Published in: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, Issue 2017, 2017

On the performance of micro injection moulding process simulations of TPE micro rings

Author(s): Federico Baruffi, Matteo Calaon, Guido Tosello
Published in: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, Issue 2017, 2017

Process parameter influence on Electro-sinter-forging (ESF) of titanium discs

Author(s): Emanuele Cannella; Chris Valentin Nielsen; Niels Bay
Published in: Proceedings of the 18th International Conference of the european Society for Precision Engineering and Nanotechnology, 2018

Micro product and process fingerprints for zero-defect net-shape micromanufacturing

Author(s): Guido Tosello, Mert Gulcur, Ben Whiteside, Phil Coates, Antonio Luca, Pablo Fook, Oltmann Riemer, Igor Danilov, Matin Yahyavi Zanjani, Matthias Hackert-Oschätzchen, Andreas Schubert, Federico Baruffi, Soufian Ben Achour, Matteo Calaon, Chris Valentin Nielsen, Giuliano Bissacco, Anette Rasmussen, Mattia Bellotti, Krishna Kumar Saxena, Jun Qian, Dominiek Reynaerts, Teguh Santoso, Sandeep Kuriakose,
Published in: Proceedings of the 19th International Conference of euspen, 2019, Page(s) 98-99

On the Applicability of Micro-injection Moulding Simulations to Multivariate Integrated Process/Product Optimization

Author(s): F. Baruffi, M. Calaon, G. Tosello, R. Elsborg
Published in: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 171-174
DOI: 10.3850/978-981-11-2728-1_18

Thermal characterization of a micro polishing machine and effect on path strategy compensation

Author(s): Soufian Ben Achour, Alessandro Checchi, Giuliano Bissacco, Leonardo De Chiffre, Hans Nørgaard Hansen
Published in: Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology, 2019, Page(s) 446-447

Applicability of Acoustic Emission monitoring to micro polishing

Author(s): Soufian Ben Achour, Giuliano Bissacco, Leonardo De Chiffre
Published in: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, 2018, Page(s) 385-356

Twin-wire electrical discharge grinding for shaping tapered micro rods

Author(s): Yan-Qing Wang, Mattia Bellotti, jun Qian, Dominiek Reynaerts,
Published in: Proceedings of the 19th International Conference of the European Society for Precision Engineering and Nanotechnology, 2019, Page(s) 444-445

Wire electrical discharge grinding of micro rods for bonding-free fabrication of soft pneumatic microactuators

Author(s): Mattia Bellotti, Edoardo Milana, Benjamin Gorissen, Jun Qian, Dominiek Reynaerts
Published in: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology,, 2018, Page(s) 413-414

Transient Simulation of the Removal Process in Plasma Electrolytic Polishing of Stainless Steel

Author(s): Igor Danilov, Matthias Hackert-Oschätzchen, I. Schaarsschmidt, Andreas Schubert
Published in: COMSOL conference, 2018

In-line monitoring of micro structured surface replication in micro-injection moulding

Author(s): Federico Baruffi, Mert Gulcur, Matteo Calaon, Ben Whiteside, Guido Tosello
Published in: Abstract presented at the euspen Special Interest Group on Structured and Freeform Surfaces, 2018

Surface integrity investigation of ground ceramic workpieces for biomedical applications

Author(s): Pablo Fook, Oltmann Riemer, Bernhard Karpuschewski
Published in: Proceedings of the 19th euspen International Conference & Exhibition, 2019

Process and product fingerprint concept for microinjection moulding of thermoplastic microneedle arrays

Author(s): Mert Gulcur, Ben Whiteside, Pablo Fook, Kai Rickens, Oltmann Riemer
Published in: Proceedings of the euspen 19th International Conference & Exhibition, 2019

Surface and subsurface characterisation of bioceramic workpieces machined by micro-grinding

Author(s): Pablo Fook, Kai Rickens, Oltmann Riemer
Published in: Proceedings of the 18th euspen International Conference & Exhibition, 2018

Characterisation of Zirconia-based Ceramics after Micro-Grinding

Author(s): Pablo Fook, Oltmann Riemer
Published in: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 175-178
DOI: 10.3850/978-981-11-2728-1_31

Effect of thermal conductivity on the achievable flow length of micro injection moulded parts

Author(s): Antonio Luca, Carla Flosky, Oltmann Riemer
Published in: Proceedings of the 19th euspen International Conference & Exhibition, 2019, Page(s) 398-399

Prediction of shrinkage and warpage effects of a micro component via injection molding process simulation

Author(s): Antonio Luca, Henrik Siesenis, Oltmann Riemer
Published in: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 167-170
DOI: 10.3850/978-981-11-2728-1_08

A hybrid laser ablation and chemical etching process for manufacturing nature-inspired anisotropic superhydrophobic structures

Author(s): Yukui Cai, Xichun Luo, Zongwei Xu, King Hang Aaron Lau, Fei Ding, Yi Qin
Published in: Proceedings of the 19th euspen International Conference & Exhibition, 2019

Simulation Study of Dynamic Behaviour of Water Droplet on Laser Machined Surface

Author(s): Yukui Cai, Xichun Luo
Published in: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 179-182
DOI: 10.3850/978-981-11-2728-1_94

Fabrication of hydrophobic structures by nanosecond pulse laser

Author(s): Yukui Cai, Ana Sousa, King Hang Aaron Lau, Wenlong Chang, Xichun Luo
Published in: 15th International Conference on Manufacturing Research, 2017

On-machine optical surface topography measurement sensor based on focus variation

Author(s): Subbareddy Darukumalli, Teguh Santoso, Wahyudin Syam, Franz Helmli, Richard Leach
Published in: Proceedings of the 19th euspen International Conference & Exhibition, 2019

Investigating the effect of the feedstock shape on ultrasonic microinjection moulding

Author(s): Mert Gulcur, Ben Whiteside, Phil Coates
Published in: Proceedings of the ANTEC conference 2019, 2019

Replication of laser structured surfaces using ultrasonic micro-injection moulding

Author(s): Mert Gulcur, Ben Whiteside, Pavel Penchev, Jean-Michel Romano,
Published in: Abstract presented at the euspen Special Interest Group on Structured and Freeform Surfaces, 2018

Process fingerprinting for optimized production of thermoplastic microneedle arrays using ultrasonic microinjection moulding

Author(s): Mert Gulcur, Ben Whiteside
Published in: Abstract for P70 – Polymer Engineering International/UK-China AMRI Research Workshop, 2018

Ultrasonic injection moulding of polypropylene and thermal visualization of the process using bespoke injection mould tool

Author(s): Mert Gulcur, Ben Whiteside, Karthick Nair, Max Babenko, Phil Coates
Published in: Proceedings of the 18th euspen International Conference & Exhibition, 2018

Effect of initial material shape and compaction routes on ultrasonic injection moulding of thermoplastic materials

Author(s): Mert Gulcur, Ben Whiteside, Max Babenko
Published in: Abstract from euspen Special Interest Group Meeting: Micro/Nano Manufacturing, 2017

Laser confocal microscope noise evaluation on injection compression moulded (ICM) transparent polymer Fresnel lenses

Author(s): Dario Loaldi, Matteo Calaon, Danilo Quagliotti, Federico Baruffi, Paolo Parenti, Guido Tosello, Massimiliano Annoni
Published in: Proceedings of the 17th euspen International Conference & Exhibition, 2017, Page(s) 357-358

Correction of Systematic Behaviour in Topographical Surface Analysis

Author(s): D. Quagliotti, F. Baruffi, G. Tosello, S. Gasparin, M. Annoni, P. Parenti, R. Sobiecki, H. N. Hansen
Published in: 4M/IWMF2016 The Global Conference on Micro Manufacture : Incorporating the 11th International Conference on Multi-Material Micro Manufacture (4M) and the 10th International Workshop on Microfactories (IWMF), 2016, Page(s) 277-280
DOI: 10.3850/978-981-11-0749-8_738

Investigation on the Micromilled Surface Characterization Through Replica Technology

Author(s): F. Baruffi, P. Parenti, F. Cacciatore, M. Annoni, G. Tosello
Published in: 4M/IWMF2016 The Global Conference on Micro Manufacture : Incorporating the 11th International Conference on Multi-Material Micro Manufacture (4M) and the 10th International Workshop on Microfactories (IWMF), 2016, Page(s) 273-276
DOI: 10.3850/978-981-11-0749-8_726

Performance verification of focus variation and confocal microscopes measuring tilted ultra-fine surfaces

Author(s): Danilo Quagliotti, Federico Baruffi, Guido Tosello, Stefania Gasparin, Massimiliano Annoni, Paolo Parenti, Rene Sobiecki, Hans Nørgaard Hansen
Published in: Proceedings of the 16th euspen International Conference & Exhibition, 2016

Research on hybrid laser-electrochemical micromachining : Prototype machine-tool development and test-machining results

Author(s): Krishna Kumar Saxena, Jun Qian, Dmoniek Reynaerts
Published in: Proceedings of the 19th euspen International Conference & Exhibition, 2019, Page(s) 476-479

Micromilling of Metallic Feedstock Produced by Extrusion Additive Manufacturing

Author(s): Kuriakose Sandeep, Parenti Paolo, Cataldo Salvatore, Annoni Massimiliano
Published in: WCMNM 2018 World Congress on Micro and Nano Manufacturing, 2018, Page(s) 125-128
DOI: 10.3850/978-981-11-2728-1_92

Debinding and Pre-Sintering of High Aspect Ratio Micro Bi-Lumen Tubes Produced by Extrusion of 17-4PH Feedstock

Author(s): Kuriakose, Sandeep; Cataldo, Salvatore; Parenti, Paolo; Annoni, MASSIMILIANO PIETRO GIOVANNI
Published in: Proceeding of 3rd World Congress on Micro and Nano Manufacturing, Issue Proceeding of 3rd World Congress on Micro and Nano Manufacturing, 2019

Effect of Feedstock Properties on Extrusion of High Aspect Ratio Micro Bi-Lumen Tubes

Author(s): Kuriakose, Sandeep; Annoni, MASSIMILIANO PIETRO GIOVANNI
Published in: 3rd World Congress on Micro and Nano Manufacturing, Issue 3rd World Congress on Micro and Nano Manufacturing, 2019

Investigation on the micro injection molding process of an overmolded multi-material micro component

Author(s): Federico Baruffi, Matteo Calaon, Guido Tosello, René Elsborg
Published in: Proceedings of the 2017 World Congress on Micro and Nano Manufacturing, Issue Proceedings of the 2017 World Congress on Micro and Nano Manufacturing, 2017, Page(s) 5 pages

Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steel

Author(s): Ajeet Singh Rajput, Henning Zeidler, Andreas Schubert
Published in: Proceedings of the 17th international conference of the european society for precision engineering and nanotechnology, 2017, Page(s) 193-194

Application of Laser Scanning as a Pre-machining metrology technique in Jet-ECM

Author(s): Matin Yahyavi Zanjani, Henning Zeidler, André Martin, Andreas Schubert
Published in: Proceedings of the 17th international conference of the european society for precision engineering and nanotechnology, 2017, Page(s) 185-186

Hydrophobicity of Pyramid Structures Fabricated by Micro Milling

Author(s): Yukui Cai, Wenlong Chang, Xichun Luo, Yi Qin
Published in: Proceedings of 2017 World Congress on Micro and Nano Manufacturing: A Joint Conference of ICOMM/4M/IFMM, 2017

Influence of variotherm injection moulding on the flow length of a micro part

Author(s): Antonio Luca, Andreas Menten, Carla Flosky, Oltmann Riemer
Published in: 2017 World Congress on Micro and Nano Manufacturing, 2017

Analysis of mould design affecting the filling behaviour of an injection moulded micro part

Author(s): Antonio Luca, Oltmann Riemer, Carla Flosky
Published in: euspen’s 17th International Conference & Exhibition, Hannover, DE, May 2017, 2017

Replication quality assessment and uncertainty evaluation of a polymer precision injection moulded component

Author(s): Federico Baruffi, Matteo Calaon, Guido Tosello, Hans N. Hansen, Manfred Prantl, Nathan Miller
Published in: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, Issue 2017, 2017, Page(s) pp. 495-496

Definition of the reference point in micro-EDM drilling of a wire drawing die

Author(s): Bellotti, Mattia Saxena, Krishna Kumar Xueling, Liu Nabuurs, Marius Qian, Jun Reynaerts, Dominiek
Published in: Proceedings of the WCMNM 2017, Issue 361-364, 2017

Green-state micromilling of AISI316L feedstock

Author(s): Parenti, Paolo; Kuriakose, Sandeep; Mussi, Valerio; Strano, Matteo; Annoni, Massimiliano
Published in: Proceedings of World Congress on Micro and Nano Manufacturing, Issue 1, 2017, Page(s) 369-372

Experimental Study on Jet Electrochemical Machining of Intersecting Single Grooves

Author(s): Matin Yahyavi Zanjani, PD Dr.-Ing. habil. Dipl.-Phys. Mattias Hackert‐Oschätzchen, André Martin, Prof. Dr.-Ing. Andreas Schubert
Published in: Euspen Special Interest Group Meeting Micro / NanoManufacturing, 8th and 9th November 2017, 2017

Effects of micro-injection moulding process parameters on accuracy and precision of thermoplastic elastomer micro rings

Author(s): Federico Baruffi, Matteo Calaon, Guido Tosello
Published in: Precision Engineering, Issue 51, 2018, Page(s) 353-361, ISSN 0141-6359
DOI: 10.1016/j.precisioneng.2017.09.006

Lubricant Influence on the Ejection and Roughness of In-Die Electro Sinter Forged Ti-Discs

Author(s): Emanuele Cannella, Chris Valentin Nielsen
Published in: Key Engineering Materials, Issue 767, 2018, Page(s) 171-178, ISSN 1662-9795
DOI: 10.4028/www.scientific.net/KEM.767.171

Micro-Injection Moulding In-Line Quality Assurance Based on Product and Process Fingerprints

Author(s): Federico Baruffi, Matteo Calaon, Guido Tosello
Published in: Micromachines, Issue 9/6, 2018, Page(s) 293, ISSN 2072-666X
DOI: 10.3390/mi9060293

Electro Sinter Forging (ESF)

Author(s): Emanuele Cannella, Chris Valentin Nielsen, Niels Bay
Published in: Micromachines, Issue 10/4, 2019, Page(s) 218, ISSN 2072-666X
DOI: 10.3390/mi10040218

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Author(s): Yang Zhang, David Bue Pedersen, Michael Mischkot, Matteo Calaon, Federico Baruffi, Guido Tosello
Published in: Journal of Visualized Experiments, Issue 138, 2018, ISSN 1940-087X
DOI: 10.3791/57335

Comparison of micro and conventional injection moulding based on process precision and accuracy

Author(s): Federico Baruffi, Alessandro Charalambis, Matteo Calaon, René Elsborg, Guido Tosello
Published in: Procedia CIRP, Issue 75, 2018, Page(s) 149-154, ISSN 2212-8271
DOI: 10.1016/j.procir.2018.04.046

Process Fingerprint in Micro-EDM Drilling

Author(s): Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Published in: Micromachines, Issue 10/4, 2019, Page(s) 240, ISSN 2072-666X
DOI: 10.3390/mi10040240

Fast Mesoscale Texturing by Multi-Electrode Scanning Micro Electrochemical Flow Cell

Author(s): Cheng Guo, Krishna Kumar Saxena, Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Published in: Procedia CIRP, Issue 68, 2018, Page(s) 741-745, ISSN 2212-8271
DOI: 10.1016/j.procir.2017.12.130

Characterization of Circumferential Surface Roughness of Micro-EDMed Holes Using Replica Technology

Author(s): Krishna Kumar Saxena, Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Published in: Procedia CIRP, Issue 68, 2018, Page(s) 582-587, ISSN 2212-8271
DOI: 10.1016/j.procir.2017.12.118

Enhancement of the Micro-EDM Process for Drilling Through-holes

Author(s): Mattia Bellotti, Jun Qian, Dominiek Reynaerts
Published in: Procedia CIRP, Issue 68, 2018, Page(s) 610-615, ISSN 2212-8271
DOI: 10.1016/j.procir.2017.12.123

A review on process capabilities of electrochemical micromachining and its hybrid variants

Author(s): Krishna Kumar Saxena, Jun Qian, Dominiek Reynaerts
Published in: International Journal of Machine Tools and Manufacture, Issue 127, 2018, Page(s) 28-56, ISSN 0890-6955
DOI: 10.1016/j.ijmachtools.2018.01.004

Process Control in Jet Electrochemical Machining of Stainless Steel through Inline Metrology of Current Density

Author(s): Matin Yahyavi Zanjani, Matthias Hackert-Oschätzchen, André Martin, Gunnar Meichsner, Jan Edelmann, Andreas Schubert
Published in: Micromachines, Issue 10/4, 2019, Page(s) 261, ISSN 2072-666X
DOI: 10.3390/mi10040261

Product/Process Fingerprint in Micro Manufacturing

Author(s): Guido Tosello
Published in: Micromachines, Issue 10/5, 2019, Page(s) 340, ISSN 2072-666X
DOI: 10.3390/mi10050340

Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology

Author(s): Igor Danilov, Matthias Hackert-Oschätzchen, Mike Zinecker, Gunnar Meichsner, Jan Edelmann, Andreas Schubert
Published in: Micromachines, Issue 10/3, 2019, Page(s) 214, ISSN 2072-666X
DOI: 10.3390/mi10030214

Characterisation of zirconia-based ceramics after micro-grinding

Author(s): Pablo Fook, Oltmann Riemer
Published in: Journal of Micro and Nano-Manufacturing, 2019, ISSN 2166-0468
DOI: 10.1115/1.4043693

Structuring of Bioceramics by Micro-Grinding for Dental Implant Applications

Author(s): Pablo Fook, Daniel Berger, Oltmann Riemer, Bernhard Karpuschewski
Published in: Micromachines, Issue 10/5, 2019, Page(s) 312, ISSN 2072-666X
DOI: 10.3390/mi10050312

Analysis of the Downscaling Effect and Definition of the Process Fingerprints in Micro Injection of Spiral Geometries

Author(s): Antonio Luca, Oltmann Riemer
Published in: Micromachines, Issue 10/5, 2019, Page(s) 335, ISSN 2072-666X
DOI: 10.3390/mi10050335

Superhydrophobicity of microstructured surfaces on zirconia by nanosecond pulsed laser

Author(s): Yukui Cai, Wenlong Chang, Xichun Luo, Yi Qin
Published in: Journal of Micromanufacturing, Issue 2/1, 2019, Page(s) 5-14, ISSN 2516-5984
DOI: 10.1177/2516598418799933

Product and Process Fingerprint for Nanosecond Pulsed Laser Ablated Superhydrophobic Surface

Author(s): Yukui Cai, Xichun Luo, Zhanqiang Liu, Yi Qin, Wenlong Chang, Yazhou Sun
Published in: Micromachines, Issue 10/3, 2019, Page(s) 177, ISSN 2072-666X
DOI: 10.3390/mi10030177

A single-step fabrication approach for development of antimicrobial surfaces

Author(s): Yukui Cai, Xichun Luo, Michelle Maclean, Yi Qin, Mark Duxbury, Fei Ding
Published in: Journal of Materials Processing Technology, Issue 271, 2019, Page(s) 249-260, ISSN 0924-0136
DOI: 10.1016/j.jmatprotec.2019.04.012

Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser

Author(s): Yukui Cai, Wenlong Chang, Xichun Luo, Ana M.L. Sousa, King Hang Aaron Lau, Yi Qin
Published in: Precision Engineering, Issue 52, 2018, Page(s) 266-275, ISSN 0141-6359
DOI: 10.1016/j.precisioneng.2018.01.004

Green-State Micromilling of Additive Manufactured AISI316 L

Author(s): Sandeep Kuriakose, Paolo Parenti, Salvatore Cataldo, Massimiliano Annoni
Published in: Journal of Micro and Nano-Manufacturing, Issue 7/1, 2019, ISSN 2166-0468
DOI: 10.1115/1.4042977

Process investigation and mechanical properties of electro sinter forged (ESF) titanium discs

Author(s): Emanuele Cannella, Chris Valentin Nielsen, Niels Bay
Published in: The International Journal of Advanced Manufacturing Technology, 2019, ISSN 0268-3768
DOI: 10.1007/s00170-019-03972-z

Mechanical durability of hydrophobic surfaces fabricated by injection moulding of laser-induced textures

Author(s): Jean-Michel Romano, Mert Gulcur, Antonio Garcia-Giron, Elena Martinez-Solanas, Ben R. Whiteside, Stefan S. Dimov
Published in: Applied Surface Science, Issue 476, 2019, Page(s) 850-860, ISSN 0169-4332
DOI: 10.1016/j.apsusc.2019.01.162

3D Multiphysics Simulation of Jet Electrochemical Machining of Intersecting Line Removals

Author(s): Raphael Paul, Matthias Hackert-Oschätzchen, Igor Danilov, Matin Yahyavi Zanjani, Andreas Schubert
Published in: Procedia CIRP, Issue 82, 2019, Page(s) 196-201, ISSN 2212-8271
DOI: 10.1016/j.procir.2019.04.154

Dynamic behaviours of water droplets impacting on laser ablated surfaces

Author(s): Yukui Cai, Xichun Luo, Yankang Tian, Rashed Md. Murad Hasan, Wenlong Chang, Yi Qin
Published in: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Issue 580, 2019, Page(s) 123743, ISSN 0927-7757
DOI: 10.1016/j.colsurfa.2019.123743

A Sequential Process for Manufacturing Nature-Inspired Anisotropic Superhydrophobic Structures on AISI 316L Stainless Steel

Author(s): Yukui Cai, Zongwei Xu, Hong Wang, King Hang Aaron Lau, Fei Ding, Jining Sun, Yi Qin, Xichun Luo
Published in: Nanomanufacturing and Metrology, Issue 2/3, 2019, Page(s) 148-159, ISSN 2520-811X
DOI: 10.1007/s41871-019-00046-2

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Author(s): Ali Davoudinejad, Yukui Cai, David Bue Pedersen, Xichun Luo, Guido Tosello
Published in: Materials & Design, Issue 176, 2019, Page(s) 107839, ISSN 0264-1275
DOI: 10.1016/j.matdes.2019.107839

On the Application of Replica Molding Technology for the Indirect Measurement of Surface and Geometry of Micromilled Components

Author(s): Federico Baruffi, Paolo Parenti, Francesco Cacciatore, Massimiliano Annoni, Guido Tosello
Published in: Micromachines, Issue 8/6, 2017, Page(s) 195, ISSN 2072-666X
DOI: 10.3390/mi8060195

Designing a Tool System for Lowering Friction during the Ejection of In-Die Sintered Micro Gears

Author(s): Emanuele Cannella, Emil Nielsen, Alessandro Stolfi
Published in: Micromachines, Issue 8/7, 2017, Page(s) 214, ISSN 2072-666X
DOI: 10.3390/mi8070214