Hydraulics modelling for drilling automation

Livrables

Personal career development plans for all ESRs

Definition case study on complex influx/loss scenarios
Model validation for complex influx/loss scenarios
Definition case study on standard (non-complex) influx/loss scenarios
Final report on project achievements
Automatic model order reduction techniques for multi-phase hydraulic drilling models for simulation and estimation & control
Multi-phase flow model description
Definition case study on normal drilling operations without influx/loss
Physics-based model complexity reduction approach for multi-phase hydraulic drilling models
Model validation for normal drilling operations without influx/loss
Model validation for standard (non-complex) influx/loss scenarios

Recruitment ESRs completed

Recruitment ESRs completed: summary report

Awarded PhD degrees ESRs

Awarded PhD degrees ESRs. Note that PhD programs at TU/e are fixed to 4 years and as a consequence the PhD defense of the ESRs at TU/e will be later than month 42.

Completed training program on Core Skill Areas 2&3
Publication of at least two peer-reviewed journal paper per ESR
Invited session proposals for IEEE Conference on Decision and Control on modelling of multiphase flow for drilling automation
Workshop on future valorisation of the results and industrial knowledge transfer
All the ESRs pass their first-year Ph.D. evaluation at their respective institutions
Matlab code implementing the multi-phase flow model
Completed training programs on Core Skill Area 1

Completed training programs on Core Skill Area 1, involving mainly training activities Teaching Activities 1-3

Project website

Publications

Model Order Reduction for Managed Pressure Drilling Systems based on a Model with Local Nonlinearities

Auteurs: S. Naderi Lordejani, B. Besselink, M.H. Abbasi, G.-O. Kaasa, W. H. A. Schilders, N. van de Wouw
Publié dans: Proceedings of the 3rd IFAC Workshop on Automatic Control in Offshore Oil and Gas Production (IFAC OOGP 2018), 2018
Éditeur: IFAC

An Extended Model Order Reduction Technique for Linear Delay Systems

Auteurs: Naderi, S., Besselink, B., van de Wouw, N.
Publié dans: in the Proceedings of the 2019 Conference on Decision and Control, 2019
Éditeur: IEEE

Transient Modeling of Influx and Observer Implementation for Estimation While Drilling

Auteurs: N. Velmurugan and F. Di Meglio
Publié dans: Proceedings of the Conference on Decision and Control, 2018
Éditeur: IEEE

Observer Design for a Coupled ODE-PDE System from a Wellbore Reservoir Drilling Model

Auteurs: L. Camacho-Solorio, N. Velmurugan, F. Di Meglio and M. Krstic
Publié dans: Proceedings of the Conference on Decision and Control, 2019
Éditeur: IEEE

Model order reduction for linear time delay systems: a delay-dependent approach based on energy functionals

Auteurs: Naderi, S., Besselink, B., CHaillet, A., van de Wouw, N.
Publié dans: Automatica, Numéro Volume 112, 2020, ISSN 0005-1098
Éditeur: Pergamon Press Ltd.

A Godunov-type scheme for the drift flux model with variable cross section

Auteurs: Mohammad Abbasi, Sajad Naderilordejani, Naveen Velmurugan, Christian Berg, Laura Iapichino, Wil Schilders, Nathan van de Wouw
Publié dans: Journal of Petroleum Science and Engineering, Numéro Volume 179, 2019, ISSN 0920-4105
Éditeur: Elsevier BV

Modelling and numerical implementation of managed pressure drilling systems for the assessment of pressure control systems

Auteurs: S. Naderi Lordejani, M. H. Abbasi, N. Velmurugan, C. Berg, J. A. Stakvik, B. Besselink, L. Iapichino, F. Di Meglio, W.H.A. Schilders, N. van de Wouw
Publié dans: SPE Drilling and Completion, 2020, Page(s) SPE-201108-PA, ISSN 1930-0204
Éditeur: SPE

A Well-Balanced Godunov-Type Scheme for the Isothermal Euler Equations and the Drift Flux Model with Laminar Friction and Gravitation

Auteurs: M.H. Abbasi, S. Naderi Lordejani, C. Berg, L. Iapichino, W.H.A. Schilders and N. van de Wouw
Publié dans: Journal of Computational Physics, Numéro Submitted, 2019, ISSN 0021-9991
Éditeur: Academic Press

Error estimation in reduced basis method for systems with time-varying and nonlinear boundary conditions

Auteurs: M.H. Abbasi, L. Iapichino, B. Besselink, W.H.A. Schilders and N. van de Wouw
Publié dans: Computer Methods in Applied Mechanics and Engineering, Numéro Vol. 360, number 112688, 2020, ISSN 0045-7825
Éditeur: Elsevier BV

Reduced Basis Method for Managed Pressure Drilling Based on a Model with Local Nonlinearities

Auteurs: M.H. Abbasi, L. Iapichino, S. Naderi Lordejani, W.H.A. Schilders and N. van de Wouw
Publié dans: International Journal for Numerical Methods in Engineering, Numéro Submitted, 2020, ISSN 0029-5981
Éditeur: John Wiley & Sons Inc.

Control-oriented modelling for managed pressure drilling automation using model order reduction

Auteurs: S. Naderi Lordejani, B. Besselink, M. H. Abbasi, G.-O. Kaasa, W. H. A. Schilders and N. van de Wouw
Publié dans: IEEE transactions on control systems technology, 2020, ISSN 1063-6536
Éditeur: Institute of Electrical and Electronics Engineers

The Influx Management Envelope Considering Real Fluid Behaviour

Auteurs: C. Berg, G. Evjen, N. Velmurugan, M. Culen
Publié dans: SPE Drilling & Completion, 2019, ISSN 1064-6671
Éditeur: Society of Petroleum Engineers, Inc.

The Influx Management Envelope Considering Real Fluid Behaviour Drilling Controls

Auteurs: Christian Berg, Geir Arne Evjen, Naveen Velmurugan, Martin Culen
Publié dans: SPE Drilling and Completion, Numéro 10.2118/198916-PA, 2019, ISSN 1064-6671
Éditeur: Society of Petroleum Engineers, Inc.

Livrables

Publications

Partager cette page

Télécharger