Deliverables Documents, reports (10) Atomistic modelling of processes at materials interfaces Summary of D5.6 Summary for dissemination outside the consortium Specific set of recommendations for material development in WP2 based on micro-models / DFT Summary D2.1, 2.2, 2.3, 2.4 Summary of the most outstanding results collected inside Task 21 22 23 24 for dissemination Catalogue of innovations risks - month 48 Catalogue of innovations risks - month 36 Catalogue of innovations risks - month 12 Catalogue of innovations risks - month 24 Visual identity kit - 48 month Visual identity kit - 48 month Visual identity kit - 12 month The kit will comprise all communication tools mentioned in this WP. Key messages will be identified for each target group, and language adapted consequently. Publications Peer reviewed articles (34) Effect of PAN-based and pitch-based carbon fibres on microstructure and properties of continuous Cf/ZrB2-SiC UHTCMCs Author(s): D. Sciti, L. Zoli, A. Vinci, L. Silvestroni, S. Mungiguerra, P. Galizia Published in: Journal of the European Ceramic Society, 2020, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2020.05.032 Influence of Y2O3 addition on the mechanical and oxidation behaviour of carbon fibre reinforced ZrB2/SiC composites Author(s): Antonio Vinci, Luca Zoli, Pietro Galizia, Diletta Sciti Published in: Journal of the European Ceramic Society, Issue 40/15, 2020, Page(s) 5067-5075, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2020.06.043 Ultra-high-temperature testing of sintered ZrB2-based ceramic composites in atmospheric re-entry environment Author(s): Stefano Mungiguerra, Giuseppe D. Di Martino, Anselmo Cecere, Raffaele Savino, Luca Zoli, Laura Silvestroni, Diletta Sciti Published in: International Journal of Heat and Mass Transfer, Issue 156, 2020, Page(s) 119910, ISSN 0017-9310 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.ijheatmasstransfer.2020.119910 Reactive melt infiltration of carbon fibre reinforced ZrB2/B composites with Zr2Cu Author(s): Antonio Vinci, Luca Zoli, Pietro Galizia, Marius Kütemeyer, Dietmar Koch, Martin Frieß, Diletta Sciti Published in: Composites Part A: Applied Science and Manufacturing, Issue 137, 2020, Page(s) 105973, ISSN 1359-835X Publisher: Pergamon Press Ltd. DOI: 10.1016/j.compositesa.2020.105973 Aero-thermo-chemical characterization of ultra-high-temperature ceramics for aerospace applications Author(s): Raffaele Savino, Luigi Criscuolo, Giuseppe Daniele Di Martino, Stefano Mungiguerra Published in: Journal of the European Ceramic Society, Issue 38/8, 2018, Page(s) 2937-2953, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2017.12.043 Understanding the mechanical properties of novel UHTCMCs through random forest and regression tree analysis Author(s): Antonio Vinci, Luca Zoli, Diletta Sciti, Cesare Melandri, Stefano Guicciardi Published in: Materials & Design, Issue 145, 2018, Page(s) 97-107, ISSN 0264-1275 Publisher: Elsevier BV DOI: 10.1016/j.matdes.2018.02.061 Synthesis of group IV and V metal diboride nanocrystals via borothermal reduction with sodium borohydride Author(s): Luca Zoli, Pietro Galizia, Laura Silvestroni, Diletta Sciti Published in: Journal of the American Ceramic Society, Issue 101/6, 2018, Page(s) 2627-2637, ISSN 0002-7820 Publisher: American Ceramic Society DOI: 10.1111/jace.15401 First‐principles investigation of the thermodynamic stability of M B 2 materials surfaces ( M = Ti/Zr/Hf) Author(s): Yanhui Zhang, Stefano Sanvito Published in: Journal of the American Ceramic Society, Issue 101/9, 2018, Page(s) 4118-4127, ISSN 0002-7820 Publisher: American Ceramic Society DOI: 10.1111/jace.15547 Tough salami-inspired Cf/ZrB2 UHTCMCs produced by electrophoretic deposition Author(s): Pietro Galizia, Simone Failla, Luca Zoli, Diletta Sciti Published in: Journal of the European Ceramic Society, Issue 38/2, 2018, Page(s) 403-409, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2017.09.047 Understanding the oxidation behavior of a ZrB 2 –MoSi 2 composite at ultra-high temperatures Author(s): Laura Silvestroni, Kerstin Stricker, Diletta Sciti, Hans-Joachim Kleebe Published in: Acta Materialia, Issue 151, 2018, Page(s) 216-228, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2018.03.042 On the thermal shock resistance and mechanical properties of novel unidirectional UHTCMCs for extreme environments Author(s): Luca Zoli, Antonio Vinci, Pietro Galizia, Cesare Melandri, Diletta Sciti Published in: Scientific Reports, Issue 8/1, 2018, ISSN 2045-2322 Publisher: Nature Publishing Group DOI: 10.1038/s41598-018-27328-x Toughening effect of non-periodic fiber distribution on crack propagation energy of UHTC composites Author(s): S. Failla, P. Galizia, L. Zoli, A. Vinci, D. Sciti Published in: Journal of Alloys and Compounds, Issue 777, 2019, Page(s) 612-618, ISSN 0925-8388 Publisher: Elsevier BV DOI: 10.1016/j.jallcom.2018.11.043 Ultra-high temperature ceramic composite Author(s): V. Rubio, P. Ramanujam, J. Binner Published in: Advances in Applied Ceramics, Issue 117/sup1, 2018, Page(s) s56-s61, ISSN 1743-6753 Publisher: Maney Publishing DOI: 10.1080/17436753.2018.1475140 Mechanical behaviour of carbon fibre reinforced TaC/SiC and ZrC/SiC composites up to 2100°C Author(s): Antonio Vinci, Luca Zoli, Diletta Sciti, Jeremy Watts, Greg E. Hilmas, William G. Fahrenholtz Published in: Journal of the European Ceramic Society, Issue 39/4, 2019, Page(s) 780-787, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2018.11.017 Influence of SiC content on the oxidation of carbon fibre reinforced ZrB 2 /SiC composites at 1500 and 1650 °C in air Author(s): Antonio Vinci, Luca Zoli, Diletta Sciti Published in: Journal of the European Ceramic Society, Issue 38/11, 2018, Page(s) 3767-3776, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2018.04.064 Testing ultra-high-temperature ceramics for thermal protection and rocket applications Author(s): R. Savino, S. Mungiguerra, G. D. Di Martino Published in: Advances in Applied Ceramics, Issue 117/sup1, 2018, Page(s) s9-s18, ISSN 1743-6753 Publisher: Maney Publishing DOI: 10.1080/17436753.2018.1509175 Influence of zirconium-based alloys on manufacturing and mechanical properties of ultra high temperature ceramic matrix composites Author(s): Marius Kütemeyer, Thomas Helmreich, Stefan Rosiwal, Dietmar Koch Published in: Advances in Applied Ceramics, Issue 117/sup1, 2018, Page(s) s62-s69, ISSN 1743-6753 Publisher: Maney Publishing DOI: 10.1080/17436753.2018.1509810 Rapid spark plasma sintering to produce dense UHTCs reinforced with undamaged carbon fibres Author(s): L. Zoli, A. Vinci, L. Silvestroni, D. Sciti, M. Reece, S. Grasso Published in: Materials & Design, Issue 130, 2017, Page(s) 1-7, ISSN 0264-1275 Publisher: Elsevier BV DOI: 10.1016/j.matdes.2017.05.029 Oxidation behaviour of a continuous carbon fibre reinforced ZrB 2 –SiC composite Author(s): Antonio Vinci, Luca Zoli, Elena Landi, Diletta Sciti Published in: Corrosion Science, Issue 123, 2017, Page(s) 129-138, ISSN 0010-938X Publisher: Pergamon Press Ltd. DOI: 10.1016/j.corsci.2017.04.012 Ablation behaviour of ultra-high temperature ceramic matrix composites: Role of MeSi2 addition Author(s): L. Silvestroni, A. Vinci, S. Failla, L. Zoli, V. Rubio, J. Binner, D. Sciti Published in: Journal of the European Ceramic Society, Issue 39/9, 2019, Page(s) 2771-2781, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.03.031 Impact of residual stress on thermal damage accumulation, and Young's modulus of fiber-reinforced ultra-high temperature ceramics Author(s): P. Galizia, L. Zoli, D. Sciti Published in: Materials & Design, Issue 160, 2018, Page(s) 803-809, ISSN 0264-1275 Publisher: Elsevier BV DOI: 10.1016/j.matdes.2018.10.019 Arc-jet wind tunnel characterization of ultra-high-temperature ceramic matrix composites Author(s): S. Mungiguerra, G.D. Di Martino, A. Cecere, R. Savino, L. Silvestroni, A. Vinci, L. Zoli, D. Sciti Published in: Corrosion Science, Issue 149, 2019, Page(s) 18-28, ISSN 0010-938X Publisher: Pergamon Press Ltd. DOI: 10.1016/j.corsci.2018.12.039 Ti3SiC2-Cf composites by spark plasma sintering: Processing, microstructure and thermo-mechanical properties Author(s): M.A. Lagos, C. Pellegrini, I. Agote, N. Azurmendi, J. Barcena, M. Parco, L. Silvestroni, L. Zoli, D. Sciti Published in: Journal of the European Ceramic Society, Issue 39/9, 2019, Page(s) 2824-2830, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.03.037 Pushing the limits of atomistic simulations towards ultra-high temperature: A machine-learning force field for ZrB2 Author(s): Yanhui Zhang, Alessandro Lunghi, Stefano Sanvito Published in: Acta Materialia, Issue 186, 2020, Page(s) 467-474, ISSN 1359-6454 Publisher: Elsevier BV DOI: 10.1016/j.actamat.2019.12.060 Interface engineering of graphene nanosheet reinforced ZrB 2 composites by tuning surface contacts Author(s): Yanhui Zhang, Stefano Sanvito Published in: Physical Review Materials, Issue 3/7, 2019, ISSN 2475-9953 Publisher: American Physical Society DOI: 10.1103/physrevmaterials.3.073604 Effect of hypersonic flow chemical composition on the oxidation behavior of a super-strong UHTC Author(s): Laura Silvestroni, Stefano Mungiguerra, Diletta Sciti, Giuseppe D. Di Martino, Raffaele Savino Published in: Corrosion Science, Issue 159, 2019, Page(s) 108125, ISSN 0010-938X Publisher: Pergamon Press Ltd. DOI: 10.1016/j.corsci.2019.108125 Influence of fibre content on the strength of carbon fibre reinforced HfC/SiC composites up to 2100 °C Author(s): Antonio Vinci, Luca Zoli, Diletta Sciti, Jeremy Watts, Greg E. Hilmas, William G. Fahrenholtz Published in: Journal of the European Ceramic Society, Issue 39/13, 2019, Page(s) 3594-3603, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.04.049 Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs – a review Author(s): Jon Binner, Matt Porter, Ben Baker, Ji Zou, Vinothini Venkatachalam, Virtudes Rubio Diaz, Andrea D'Angio, Prabhu Ramanujam, Tailin Zhang, T. S. R. C. Murthy Published in: International Materials Reviews, 2019, Page(s) 1-56, ISSN 0950-6608 Publisher: Maney Publishing DOI: 10.1080/09506608.2019.1652006 Merging toughness and oxidation resistance in a light ZrB2 composite Author(s): Laura Silvestroni, Cesare Melandri, Vinothini Venkatachalam, Jon Binner, Diletta Sciti Published in: Materials & Design, Issue 183, 2019, Page(s) 108078, ISSN 0264-1275 Publisher: Elsevier BV DOI: 10.1016/j.matdes.2019.108078 Off-axis damage tolerance of fiber-reinforced composites for aerospace systems Author(s): P. Galizia, D. Sciti, F. Saraga, L. Zoli Published in: Journal of the European Ceramic Society, Issue 40/7, 2020, Page(s) 2691-2698, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.12.038 A simple route to fabricate strong boride hierarchical composites for use at ultra-high temperature Author(s): Laura Silvestroni, Nicola Gilli, Andrea Migliori, Diletta Sciti, Jeremy Watts, Greg E. Hilmas, William G. Fahrenholtz Published in: Composites Part B: Engineering, Issue 183, 2020, Page(s) 107618, ISSN 1359-8368 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.compositesb.2019.107618 Is spark plasma sintering suitable for the densification of continuous carbon fibre - UHTCMCs? Author(s): Luca Zoli, Antonio Vinci, Pietro Galizia, Carlos F. Gutièrrez-Gonzalez, Sergio Rivera, Diletta Sciti Published in: Journal of the European Ceramic Society, Issue 40/7, 2020, Page(s) 2597-2603, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.12.004 Efficacy of a ZrB2–SiC matrix in protecting C fibres from oxidation in novel UHTCMC materials Author(s): L. Zoli, D. Sciti Published in: Materials & Design, Issue 113, 2017, Page(s) 207-213, ISSN 0264-1275 Publisher: Elsevier BV DOI: 10.1016/j.matdes.2016.09.104 Development of UHTCMCs via water based ZrB2 powder slurry infiltration and polymer infiltration and pyrolysis Author(s): Francesca Servadei, Luca Zoli, Pietro Galizia, Antonio Vinci, Diletta Sciti Published in: Journal of the European Ceramic Society, Issue 40/15, 2020, Page(s) 5076-5084, ISSN 0955-2219 Publisher: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2020.05.054 Conference proceedings (5) Ultra-High-Temperature Ceramic Matrix Composites in Hybrid Rocket Propulsion Environment Author(s): Stefano Mungiguerra, Giuseppe D. Di Martino, Raffaele Savino, Luca Zoli, Diletta Sciti, Miguel A. Lagos Published in: 2018 International Energy Conversion Engineering Conference, 2018, ISBN 978-1-62410-571-5 Publisher: American Institute of Aeronautics and Astronautics DOI: 10.2514/6.2018-4694 Characterization of carbon-fiber reinforced ultra-high-temperature ceramic matrix composites in arc-jet environment Author(s): Mungiguerra Stefano; Di Martino Giuseppe D.; Cecere Anselmo; Savino Raffaele; Zoli Luca; Silvestroni Laura; Sciti Diletta Published in: 69th International Astronautical Congress (IAC), Issue 1, 2018 Publisher: IAF DOI: 10.5281/zenodo.1473396 Hybrid rockets with nozzle in ultra-high-temperature ceramic composites Author(s): Di Martino Giuseppe D.; Mungiguerra Stefano; Cecere Anselmo; Savino Raffaele; Vinci Antonio; Zoli Luca; Sciti Diletta Published in: 69th International Astronautical Congress (IAC), Issue 1, 2018 Publisher: IAF DOI: 10.5281/zenodo.1473368 Effect of SiC concentration on aero-thermal behavior of ZrB2-based ceramics in hypersonic environment Author(s): Mungiguerra Stefano; Di Martino Giuseppe D.; Cecere Anselmo; Savino Raffaele; Monteverde Frédéric Published in: 70th International Astronautical Congress (IAC), Issue 1, 2019 Publisher: 70th International Astronautical Congress (IAC) DOI: 10.5281/zenodo.3744596 Ultra-High-Temperature Ceramic Matrix Composites for Hybrid Rocket Nozzles Author(s): Di Martino, Giuseppe D.; Mungiguerraa, Stefano; Cecere, Anselmo; Savino, Raffaele; Zoli, Luca; Vinci, Antonio; Silvestroni, Laura; Sciti, Diletta Published in: 70th International Astronautical Congress (IAC), Issue 1, 2019 Publisher: 70th International Astronautical Congress (IAC) DOI: 10.5281/zenodo.3744575 Other (2) Arc-Jet testing of ultra-high-temperature ceramic matrix composites for aerospace applications. Author(s): Mungiguerra Stefano Published in: First Workshop for Young Ceramists, Bologna, Italy, 26-27 November 2018, 2018 Publisher: First Workshop for Young Ceramists, Bologna, Italy, 26-27 November 2018 DOI: 10.5281/zenodo.2551293 Processing and characterization of carbon fibre reinforced ZrB2/SiC/WC composites Author(s): Vinci Antonio Published in: First Workshop for Young Ceramists, Bologna, Italy, 26-27 November 2018, 2018 Publisher: First Workshop for Young Ceramists, Bologna, Italy, 26-27 November 2018 DOI: 10.5281/zenodo.2551275 Intellectual Property Rights Patent (1) PROCESS FOR OBTAINING COMPOSITE, ULTRA-REFRACTORY, FIBRE-REINFORCED CERAMIC MATERIALS Application/Publication number: 20 19059964 Date: 2019-11-20 Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available