Resultado final Documents, reports (10) Atomistic modelling of processes at materials interfaces Summary of D5.6 Summary for dissemination outside the consortium Specific set of recommendations for material development in WP2 based on micro-models / DFT Summary D2.1, 2.2, 2.3, 2.4 Summary of the most outstanding results collected inside Task 21 22 23 24 for dissemination Catalogue of innovations risks - month 48 Catalogue of innovations risks - month 36 Catalogue of innovations risks - month 12 Catalogue of innovations risks - month 24 Visual identity kit - 48 month Visual identity kit - 48 month Visual identity kit - 12 month The kit will comprise all communication tools mentioned in this WP. Key messages will be identified for each target group, and language adapted consequently. Publicaciones Peer reviewed articles (34) Effect of PAN-based and pitch-based carbon fibres on microstructure and properties of continuous Cf/ZrB2-SiC UHTCMCs Autores: D. Sciti, L. Zoli, A. Vinci, L. Silvestroni, S. Mungiguerra, P. Galizia Publicado en: Journal of the European Ceramic Society, 2020, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2020.05.032 Influence of Y2O3 addition on the mechanical and oxidation behaviour of carbon fibre reinforced ZrB2/SiC composites Autores: Antonio Vinci, Luca Zoli, Pietro Galizia, Diletta Sciti Publicado en: Journal of the European Ceramic Society, Issue 40/15, 2020, Page(s) 5067-5075, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2020.06.043 Ultra-high-temperature testing of sintered ZrB2-based ceramic composites in atmospheric re-entry environment Autores: Stefano Mungiguerra, Giuseppe D. Di Martino, Anselmo Cecere, Raffaele Savino, Luca Zoli, Laura Silvestroni, Diletta Sciti Publicado en: International Journal of Heat and Mass Transfer, Issue 156, 2020, Page(s) 119910, ISSN 0017-9310 Editor: Pergamon Press Ltd. DOI: 10.1016/j.ijheatmasstransfer.2020.119910 Reactive melt infiltration of carbon fibre reinforced ZrB2/B composites with Zr2Cu Autores: Antonio Vinci, Luca Zoli, Pietro Galizia, Marius Kütemeyer, Dietmar Koch, Martin Frieß, Diletta Sciti Publicado en: Composites Part A: Applied Science and Manufacturing, Issue 137, 2020, Page(s) 105973, ISSN 1359-835X Editor: Pergamon Press Ltd. DOI: 10.1016/j.compositesa.2020.105973 Aero-thermo-chemical characterization of ultra-high-temperature ceramics for aerospace applications Autores: Raffaele Savino, Luigi Criscuolo, Giuseppe Daniele Di Martino, Stefano Mungiguerra Publicado en: Journal of the European Ceramic Society, Issue 38/8, 2018, Page(s) 2937-2953, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2017.12.043 Understanding the mechanical properties of novel UHTCMCs through random forest and regression tree analysis Autores: Antonio Vinci, Luca Zoli, Diletta Sciti, Cesare Melandri, Stefano Guicciardi Publicado en: Materials & Design, Issue 145, 2018, Page(s) 97-107, ISSN 0264-1275 Editor: Elsevier BV DOI: 10.1016/j.matdes.2018.02.061 Synthesis of group IV and V metal diboride nanocrystals via borothermal reduction with sodium borohydride Autores: Luca Zoli, Pietro Galizia, Laura Silvestroni, Diletta Sciti Publicado en: Journal of the American Ceramic Society, Issue 101/6, 2018, Page(s) 2627-2637, ISSN 0002-7820 Editor: American Ceramic Society DOI: 10.1111/jace.15401 First‐principles investigation of the thermodynamic stability of M B 2 materials surfaces ( M = Ti/Zr/Hf) Autores: Yanhui Zhang, Stefano Sanvito Publicado en: Journal of the American Ceramic Society, Issue 101/9, 2018, Page(s) 4118-4127, ISSN 0002-7820 Editor: American Ceramic Society DOI: 10.1111/jace.15547 Tough salami-inspired Cf/ZrB2 UHTCMCs produced by electrophoretic deposition Autores: Pietro Galizia, Simone Failla, Luca Zoli, Diletta Sciti Publicado en: Journal of the European Ceramic Society, Issue 38/2, 2018, Page(s) 403-409, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2017.09.047 Understanding the oxidation behavior of a ZrB 2 –MoSi 2 composite at ultra-high temperatures Autores: Laura Silvestroni, Kerstin Stricker, Diletta Sciti, Hans-Joachim Kleebe Publicado en: Acta Materialia, Issue 151, 2018, Page(s) 216-228, ISSN 1359-6454 Editor: Elsevier BV DOI: 10.1016/j.actamat.2018.03.042 On the thermal shock resistance and mechanical properties of novel unidirectional UHTCMCs for extreme environments Autores: Luca Zoli, Antonio Vinci, Pietro Galizia, Cesare Melandri, Diletta Sciti Publicado en: Scientific Reports, Issue 8/1, 2018, ISSN 2045-2322 Editor: Nature Publishing Group DOI: 10.1038/s41598-018-27328-x Toughening effect of non-periodic fiber distribution on crack propagation energy of UHTC composites Autores: S. Failla, P. Galizia, L. Zoli, A. Vinci, D. Sciti Publicado en: Journal of Alloys and Compounds, Issue 777, 2019, Page(s) 612-618, ISSN 0925-8388 Editor: Elsevier BV DOI: 10.1016/j.jallcom.2018.11.043 Ultra-high temperature ceramic composite Autores: V. Rubio, P. Ramanujam, J. Binner Publicado en: Advances in Applied Ceramics, Issue 117/sup1, 2018, Page(s) s56-s61, ISSN 1743-6753 Editor: Maney Publishing DOI: 10.1080/17436753.2018.1475140 Mechanical behaviour of carbon fibre reinforced TaC/SiC and ZrC/SiC composites up to 2100°C Autores: Antonio Vinci, Luca Zoli, Diletta Sciti, Jeremy Watts, Greg E. Hilmas, William G. Fahrenholtz Publicado en: Journal of the European Ceramic Society, Issue 39/4, 2019, Page(s) 780-787, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2018.11.017 Influence of SiC content on the oxidation of carbon fibre reinforced ZrB 2 /SiC composites at 1500 and 1650 °C in air Autores: Antonio Vinci, Luca Zoli, Diletta Sciti Publicado en: Journal of the European Ceramic Society, Issue 38/11, 2018, Page(s) 3767-3776, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2018.04.064 Testing ultra-high-temperature ceramics for thermal protection and rocket applications Autores: R. Savino, S. Mungiguerra, G. D. Di Martino Publicado en: Advances in Applied Ceramics, Issue 117/sup1, 2018, Page(s) s9-s18, ISSN 1743-6753 Editor: Maney Publishing DOI: 10.1080/17436753.2018.1509175 Influence of zirconium-based alloys on manufacturing and mechanical properties of ultra high temperature ceramic matrix composites Autores: Marius Kütemeyer, Thomas Helmreich, Stefan Rosiwal, Dietmar Koch Publicado en: Advances in Applied Ceramics, Issue 117/sup1, 2018, Page(s) s62-s69, ISSN 1743-6753 Editor: Maney Publishing DOI: 10.1080/17436753.2018.1509810 Rapid spark plasma sintering to produce dense UHTCs reinforced with undamaged carbon fibres Autores: L. Zoli, A. Vinci, L. Silvestroni, D. Sciti, M. Reece, S. Grasso Publicado en: Materials & Design, Issue 130, 2017, Page(s) 1-7, ISSN 0264-1275 Editor: Elsevier BV DOI: 10.1016/j.matdes.2017.05.029 Oxidation behaviour of a continuous carbon fibre reinforced ZrB 2 –SiC composite Autores: Antonio Vinci, Luca Zoli, Elena Landi, Diletta Sciti Publicado en: Corrosion Science, Issue 123, 2017, Page(s) 129-138, ISSN 0010-938X Editor: Pergamon Press Ltd. DOI: 10.1016/j.corsci.2017.04.012 Ablation behaviour of ultra-high temperature ceramic matrix composites: Role of MeSi2 addition Autores: L. Silvestroni, A. Vinci, S. Failla, L. Zoli, V. Rubio, J. Binner, D. Sciti Publicado en: Journal of the European Ceramic Society, Issue 39/9, 2019, Page(s) 2771-2781, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.03.031 Impact of residual stress on thermal damage accumulation, and Young's modulus of fiber-reinforced ultra-high temperature ceramics Autores: P. Galizia, L. Zoli, D. Sciti Publicado en: Materials & Design, Issue 160, 2018, Page(s) 803-809, ISSN 0264-1275 Editor: Elsevier BV DOI: 10.1016/j.matdes.2018.10.019 Arc-jet wind tunnel characterization of ultra-high-temperature ceramic matrix composites Autores: S. Mungiguerra, G.D. Di Martino, A. Cecere, R. Savino, L. Silvestroni, A. Vinci, L. Zoli, D. Sciti Publicado en: Corrosion Science, Issue 149, 2019, Page(s) 18-28, ISSN 0010-938X Editor: Pergamon Press Ltd. DOI: 10.1016/j.corsci.2018.12.039 Ti3SiC2-Cf composites by spark plasma sintering: Processing, microstructure and thermo-mechanical properties Autores: M.A. Lagos, C. Pellegrini, I. Agote, N. Azurmendi, J. Barcena, M. Parco, L. Silvestroni, L. Zoli, D. Sciti Publicado en: Journal of the European Ceramic Society, Issue 39/9, 2019, Page(s) 2824-2830, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.03.037 Pushing the limits of atomistic simulations towards ultra-high temperature: A machine-learning force field for ZrB2 Autores: Yanhui Zhang, Alessandro Lunghi, Stefano Sanvito Publicado en: Acta Materialia, Issue 186, 2020, Page(s) 467-474, ISSN 1359-6454 Editor: Elsevier BV DOI: 10.1016/j.actamat.2019.12.060 Interface engineering of graphene nanosheet reinforced ZrB 2 composites by tuning surface contacts Autores: Yanhui Zhang, Stefano Sanvito Publicado en: Physical Review Materials, Issue 3/7, 2019, ISSN 2475-9953 Editor: American Physical Society DOI: 10.1103/physrevmaterials.3.073604 Effect of hypersonic flow chemical composition on the oxidation behavior of a super-strong UHTC Autores: Laura Silvestroni, Stefano Mungiguerra, Diletta Sciti, Giuseppe D. Di Martino, Raffaele Savino Publicado en: Corrosion Science, Issue 159, 2019, Page(s) 108125, ISSN 0010-938X Editor: Pergamon Press Ltd. DOI: 10.1016/j.corsci.2019.108125 Influence of fibre content on the strength of carbon fibre reinforced HfC/SiC composites up to 2100 °C Autores: Antonio Vinci, Luca Zoli, Diletta Sciti, Jeremy Watts, Greg E. Hilmas, William G. Fahrenholtz Publicado en: Journal of the European Ceramic Society, Issue 39/13, 2019, Page(s) 3594-3603, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.04.049 Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs – a review Autores: Jon Binner, Matt Porter, Ben Baker, Ji Zou, Vinothini Venkatachalam, Virtudes Rubio Diaz, Andrea D'Angio, Prabhu Ramanujam, Tailin Zhang, T. S. R. C. Murthy Publicado en: International Materials Reviews, 2019, Page(s) 1-56, ISSN 0950-6608 Editor: Maney Publishing DOI: 10.1080/09506608.2019.1652006 Merging toughness and oxidation resistance in a light ZrB2 composite Autores: Laura Silvestroni, Cesare Melandri, Vinothini Venkatachalam, Jon Binner, Diletta Sciti Publicado en: Materials & Design, Issue 183, 2019, Page(s) 108078, ISSN 0264-1275 Editor: Elsevier BV DOI: 10.1016/j.matdes.2019.108078 Off-axis damage tolerance of fiber-reinforced composites for aerospace systems Autores: P. Galizia, D. Sciti, F. Saraga, L. Zoli Publicado en: Journal of the European Ceramic Society, Issue 40/7, 2020, Page(s) 2691-2698, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.12.038 A simple route to fabricate strong boride hierarchical composites for use at ultra-high temperature Autores: Laura Silvestroni, Nicola Gilli, Andrea Migliori, Diletta Sciti, Jeremy Watts, Greg E. Hilmas, William G. Fahrenholtz Publicado en: Composites Part B: Engineering, Issue 183, 2020, Page(s) 107618, ISSN 1359-8368 Editor: Pergamon Press Ltd. DOI: 10.1016/j.compositesb.2019.107618 Is spark plasma sintering suitable for the densification of continuous carbon fibre - UHTCMCs? Autores: Luca Zoli, Antonio Vinci, Pietro Galizia, Carlos F. Gutièrrez-Gonzalez, Sergio Rivera, Diletta Sciti Publicado en: Journal of the European Ceramic Society, Issue 40/7, 2020, Page(s) 2597-2603, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2019.12.004 Efficacy of a ZrB2–SiC matrix in protecting C fibres from oxidation in novel UHTCMC materials Autores: L. Zoli, D. Sciti Publicado en: Materials & Design, Issue 113, 2017, Page(s) 207-213, ISSN 0264-1275 Editor: Elsevier BV DOI: 10.1016/j.matdes.2016.09.104 Development of UHTCMCs via water based ZrB2 powder slurry infiltration and polymer infiltration and pyrolysis Autores: Francesca Servadei, Luca Zoli, Pietro Galizia, Antonio Vinci, Diletta Sciti Publicado en: Journal of the European Ceramic Society, Issue 40/15, 2020, Page(s) 5076-5084, ISSN 0955-2219 Editor: Elsevier BV DOI: 10.1016/j.jeurceramsoc.2020.05.054 Conference proceedings (5) Ultra-High-Temperature Ceramic Matrix Composites in Hybrid Rocket Propulsion Environment Autores: Stefano Mungiguerra, Giuseppe D. Di Martino, Raffaele Savino, Luca Zoli, Diletta Sciti, Miguel A. Lagos Publicado en: 2018 International Energy Conversion Engineering Conference, 2018, ISBN 978-1-62410-571-5 Editor: American Institute of Aeronautics and Astronautics DOI: 10.2514/6.2018-4694 Characterization of carbon-fiber reinforced ultra-high-temperature ceramic matrix composites in arc-jet environment Autores: Mungiguerra Stefano; Di Martino Giuseppe D.; Cecere Anselmo; Savino Raffaele; Zoli Luca; Silvestroni Laura; Sciti Diletta Publicado en: 69th International Astronautical Congress (IAC), Issue 1, 2018 Editor: IAF DOI: 10.5281/zenodo.1473396 Hybrid rockets with nozzle in ultra-high-temperature ceramic composites Autores: Di Martino Giuseppe D.; Mungiguerra Stefano; Cecere Anselmo; Savino Raffaele; Vinci Antonio; Zoli Luca; Sciti Diletta Publicado en: 69th International Astronautical Congress (IAC), Issue 1, 2018 Editor: IAF DOI: 10.5281/zenodo.1473368 Effect of SiC concentration on aero-thermal behavior of ZrB2-based ceramics in hypersonic environment Autores: Mungiguerra Stefano; Di Martino Giuseppe D.; Cecere Anselmo; Savino Raffaele; Monteverde Frédéric Publicado en: 70th International Astronautical Congress (IAC), Issue 1, 2019 Editor: 70th International Astronautical Congress (IAC) DOI: 10.5281/zenodo.3744596 Ultra-High-Temperature Ceramic Matrix Composites for Hybrid Rocket Nozzles Autores: Di Martino, Giuseppe D.; Mungiguerraa, Stefano; Cecere, Anselmo; Savino, Raffaele; Zoli, Luca; Vinci, Antonio; Silvestroni, Laura; Sciti, Diletta Publicado en: 70th International Astronautical Congress (IAC), Issue 1, 2019 Editor: 70th International Astronautical Congress (IAC) DOI: 10.5281/zenodo.3744575 Other (2) Arc-Jet testing of ultra-high-temperature ceramic matrix composites for aerospace applications. Autores: Mungiguerra Stefano Publicado en: First Workshop for Young Ceramists, Bologna, Italy, 26-27 November 2018, 2018 Editor: First Workshop for Young Ceramists, Bologna, Italy, 26-27 November 2018 DOI: 10.5281/zenodo.2551293 Processing and characterization of carbon fibre reinforced ZrB2/SiC/WC composites Autores: Vinci Antonio Publicado en: First Workshop for Young Ceramists, Bologna, Italy, 26-27 November 2018, 2018 Editor: First Workshop for Young Ceramists, Bologna, Italy, 26-27 November 2018 DOI: 10.5281/zenodo.2551275 Derechos de propiedad intelectual Patent (1) PROCESS FOR OBTAINING COMPOSITE, ULTRA-REFRACTORY, FIBRE-REINFORCED CERAMIC MATERIALS Número de solicitud/publicación: 20 19059964 Fecha: 2019-11-20 Buscando datos de OpenAIRE... Se ha producido un error en la búsqueda de datos de OpenAIRE No hay resultados disponibles
