Modified cost effective fibre based structures with improved multi-functionality and performance

Nanoscale thermal properties of carbon nanotubes/epoxy composites by atomistic simulations

Autores: Shahin Mohammad Nejad, Rajat Srivastava, Francesco Maria Bellussi, Hernán Chávez Thielemann, Pietro Asinari, Matteo Fasano
Publicado en: International Journal of Thermal Sciences, Edición 159, 2021, Página(s) 106588, ISSN 1290-0729
Editor: Elsevier BV
DOI: 10.1016/j.ijthermalsci.2020.106588

End-of-Life Recycling Options of (Nano)Enhanced CFRP Composite Prototypes Waste—A Life Cycle Perspective

Autores: F. Petrakli, A. Gkika, A. Bonou, P. Karayannis, E.P. Koumoulos, D. Semitekolos, A.F Trompeta, N. Rocha, R.M. Santos, G. Simmonds, G. Monaghan, G. Valota, G. Gong, C.A. Charitidis
Publicado en: Polymers, Edición 12, 2020, Página(s) 2129, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12092129

Fabrication and characterisation of electro-brush plated nickel-graphene oxide nano-composite coatings

Autores: Shaojun Qi, Xiaoying Li, Zhenxue Zhang, Hanshan Dong
Publicado en: Thin Solid Films, 2017, ISSN 0040-6090
Editor: Elsevier Sequoia
DOI: 10.1016/j.tsf.2017.06.064

Low-Cost Carbon Fillers to Improve Mechanical Properties and Conductivity of Epoxy Composites

Autores: Aamer Khan, Patrizia Savi, Simone Quaranta, Massimo Rovere, Mauro Giorcelli, Alberto Tagliaferro, Carlo Rosso, Charles Jia
Publicado en: Polymers, Edición 9/12, 2017, Página(s) 642, ISSN 2073-4360
Editor: DMPI
DOI: 10.3390/polym9120642

Sliding Dynamics of Parallel Graphene Sheets: Effect of Geometry and Van Der Waals Interactions on Nano-Spring Behavior

Autores: Alessandro Crisafulli, Ali Khodayari, Shahin Mohammadnejad, Matteo Fasano
Publicado en: Crystals, Edición 8/4, 2018, Página(s) 149, ISSN 2073-4352
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/cryst8040149

Interface Characterization of Epoxy Resin Nanocomposites: A Molecular Dynamics Approach

Autores: Carlos Sáenz Ezquerro, Manuel Laspalas, Agustín Chiminelli, Francisco Serrano, Clara Valero
Publicado en: Fibers, Edición 6/3, 2018, Página(s) 54, ISSN 2079-6439
Editor: Fibers 2018, MDPI
DOI: 10.3390/fib6030054

Viscoelastic response of carbon fibre reinforced polymer during push-out tests

Autores: Santiago Corujeira Gallo, Xiaoying Li, Zhenxue Zhang, Constantinos Charitidis, Hanshan Dong
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 112, 2018, Página(s) 178-185, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2018.06.003

Advanced carbon fibre composites via poly methacrylic acid surface treatment; surface analysis and mechanical properties investigation

Autores: Dionisis Semitekolos, Panagiotis Kainourgios, Craig Jones, Amit Rana, Elias P. Koumoulos, Costas A. Charitidis
Publicado en: Composites Part B: Engineering, Edición 155, 2018, Página(s) 237-243, ISSN 1359-8368
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2018.08.027

Development of Electrophoretic Deposition Prototype for Continuous Production of Carbon Nanotube-Modified Carbon Fiber Fabrics Used in High-Performance Multifunctional Composites

Autores: Guan Gong, Birgitha Nyström, Erik Sandlund, Daniel Eklund, Maxime Noël, Robert Westerlund, Sofia Stenberg, Liva Pupure, Andrejs Pupurs, Roberts Joffe
Publicado en: Fibers, Edición 6/4, 2018, Página(s) 71, ISSN 2079-6439
Editor: MDPI
DOI: 10.3390/fib6040071

Heat transfer at the interface of graphene nanoribbons with various relative orientations and gaps

Autores: Shahin Mohammadnejad, Masoud Bozorg Bigdeli, Rajat Srivastava and Matteo Fasano
Publicado en: MDPI, 2019, ISSN 2073-4360
Editor: MDPI

Nano-Graphitic based Non-Volatile Memories Fabricated by the Dynamic Spray-Gun Deposition Method

Autores: Paolo Bondavalli, Marie Martin, Louiza Hamidouche, Alberto Montanaro, Aikaterini-Flora Trompeta, Costas Charitidis
Publicado en: Micromachines, Edición 10/2, 2019, Página(s) 95, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10020095

Synergetic effects of carbon nanotube-graphene nanoplatelet hybrids in carbon fibre reinforced polymer composites

Autores: Magda Silva, Diogo Vale, Jéssica Rocha, Nuno Rocha, Raquel Miriam Santos
Publicado en: MATEC Web of Conferences, Edición 188, 2018, Página(s) 01015, ISSN 2261-236X
Editor: ICEAF-V
DOI: 10.1051/matecconf/201818801015

Assessing the Critical Multifunctionality Threshold for Optimal Electrical, Thermal, and Nanomechanical Properties of Carbon Nanotubes/Epoxy Nanocomposites for Aerospace Applications

Autores: Aikaterini-Flora Trompeta, Elias Koumoulos, Sotirios Stavropoulos, Theodoros Velmachos, Georgios Psarras, Costas Charitidis
Publicado en: Aerospace, Edición 6/1, 2019, Página(s) 7, ISSN 2226-4310
Editor: MDPI
DOI: 10.3390/aerospace6010007

Integrity of Carbon-Fibre Epoxy Composites through a Nanomechanical Mapping Protocol towards Quality Assurance

Autores: Elias Koumoulos, Costas Charitidis
Publicado en: Fibers, Edición 6/4, 2018, Página(s) 78, ISSN 2079-6439
Editor: MDPI
DOI: 10.3390/fib6040078

Biochar as a cheap and environmental friendly filler able to improve polymer mechanical properties

Autores: Mauro Giorcelli, Aamer Khan, Nicola M. Pugno, Carlo Rosso, Alberto Tagliaferro
Publicado en: Biomass and Bioenergy, Edición 120, 2019, Página(s) 219-223, ISSN 0961-9534
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.biombioe.2018.11.036

Mesoscopic Moment Equations for Heat Conduction: Characteristic Features and Slow–Fast Mode Decomposition

Autores: Luca Bergamasco, Matteo Alberghini, Matteo Fasano, Annalisa Cardellini, Eliodoro Chiavazzo and Pietro Asinari
Publicado en: Entropy, Edición 20/2, 2018, Página(s) 126, ISSN 1099-4300
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/e20020126

Plasma Surface Functionalization of Carbon Nanofibres with Silver, Palladium and Platinum Nanoparticles for Cost-Effective and High-Performance Supercapacitors

Autores: Zelun Li, Shaojun Qi, Yana Liang, Zhenxue Zhang, Xiaoying Li, Hanshan Dong
Publicado en: Micromachines, Edición 10/1, 2019, Página(s) 2, ISSN 2072-666X
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10010002

Analysis of the elastic properties of CNTs and their effect in polymer nanocomposites

Autores: Manuel Laspalas, Agustín Chiminelli, Carlos Saenz, Francisco Serrano, Clara Valero
Publicado en: MATEC Web of Conferences, Edición 188, 2018, Página(s) 01018, ISSN 2261-236X
Editor: ICEAF-V
DOI: 10.1051/matecconf/201818801018

Study on the carbon nanotubes reinforced nanocomposite coatings

Autores: Xiaochao Ji, Xiaoying Li, Helong Yu, Wei Zhang, Hanshan Dong
Publicado en: Diamond and Related Materials, Edición 91, 2019, Página(s) 247-254, ISSN 0925-9635
Editor: Elsevier BV
DOI: 10.1016/j.diamond.2018.11.027

Heat Transfer at the Interface of Graphene Nanoribbons with Different Relative Orientations and Gaps

Autores: Shahin Mohammad Nejad, Masoud Bozorg Bigdeli , Rajat Srivastava and Matteo Fasano
Publicado en: Energies, 2019, ISSN 1996-1073
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en12050796

Multiscale carbon fibre–reinforced polymer ( CFRP ) composites containing carbon nanotubes with tailored interfaces

Autores: Raquel M. Santos, Diogo Vale, Jéssica Rocha, Carla Martins, Sacha T. Mould, Nuno Rocha
Publicado en: Fatigue & Fracture of Engineering Materials & Structures, 2019, ISSN 8756-758X
Editor: Blackwell Publishing Inc.
DOI: 10.1111/ffe.13006

Production and 3D printing processing of bio-based thermoplastic filament

Autores: Eleni Gkartzou, Elias P. Koumoulos, Costas A. Charitidis
Publicado en: Manufacturing Review, Edición 4, 2017, Página(s) 1, ISSN 2265-4224
Editor: EDP Open
DOI: 10.1051/mfreview/2016020

Surface analysis and mechanical behaviour mapping of vertically aligned CNT forest array through nanoindentation

Autores: Elias P. Koumoulos, C.A. Charitidis
Publicado en: Applied Surface Science, Edición Volume 396, 2017, Página(s) 681–687, ISSN 0169-4332
Editor: Elsevier BV
DOI: 10.1016/j.apsusc.2016.11.008

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Autores: Elias P. Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A. Charitidis
Publicado en: Journal of Composites Science, Edición 3/3, 2019, Página(s) 86, ISSN 2504-477X
Editor: MDPI
DOI: 10.3390/jcs3030086

Constituents Phase Reconstruction through Applied Machine Learning in Nanoindentation Mapping Data of Mortar Surface

Autores: Elias P. Koumoulos, Konstantinos Paraskevoudis, Costas A. Charitidis
Publicado en: Journal of Composites Science, Edición 3/3, 2019, Página(s) 63, ISSN 2504-477X
Editor: MDPI
DOI: 10.3390/jcs3030063

Evaluation of the creep behaviour of the carbon fibre in an unidirectional pultruded reinforced composite using nano-indentation technique

Autores: Zhenxue Zhang, Santiago Corujeira Gallo, Xiaoying Li, Hanshan Dong, Dimitrios Dragatogiannis, Costas A. Charitidis
Publicado en: Polymer Testing, Edición 80, 2019, Página(s) 106091, ISSN 0142-9418
Editor: Elsevier BV
DOI: 10.1016/j.polymertesting.2019.106091

Enhancement of mechanical integrity of advanced composites using PMAA-electropolymerised CF fabrics

Autores: Dionisis Semitekolos, Panagiotis Goulis, Despoina Batsouli, Elias P. Koumoulos, Loukas Zoumpoulakis, Costas A. Charitidis
Publicado en: International Journal of Structural Integrity, Edición ahead-of-print/ahead-of-print, 2019, ISSN 1757-9864
Editor: Emerald Group Publishing Ltd.
DOI: 10.1108/ijsi-08-2018-0050

Deposition of graphene and related nanomaterials by dynamic spray-gun method: a new route to implement nanomaterials in real applications

Autores: Paolo Bondavalli, Didier Pribat, Pierre Legagneux, Marie-Blandine Martin, Louiza Hamidouche, Lilia Qassym, Gilles Feugnet, Aikaterini-Flora Trompeta, Constantinos A Charitidis
Publicado en: Journal of Physics: Materials, Edición 2/3, 2019, Página(s) 032002, ISSN 2515-7639
Editor: IOP Science
DOI: 10.1088/2515-7639/ab1795

Enhanced properties of PAN‐derived carbon fibres and resulting composites by active screen plasma surface functionalisation

Autores: Yana Liang, Xiaoying Li, Dionisis Semitekolos, Costas A. Charitidis, Hanshan Dong
Publicado en: Plasma Processes and Polymers, 2020, ISSN 1612-8850
Editor: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/ppap.201900252

Applying Machine Learning to Nanoindentation Data of (Nano-) Enhanced Composites

Autores: Elias Koumoulos, George Konstantopoulos, Costas Charitidis
Publicado en: Fibers, Edición 8/1, 2020, Página(s) 3, ISSN 2079-6439
Editor: Fibers
DOI: 10.3390/fib8010003

Synthesis and in-vitro antibacterial properties of the novel Ag wires reinforced carbon based composite coatings

Autores: Xiaochao Ji, Yangchun Dong, Xiaoying Li, Helong Yu, Tian Ma, Wei Zhang, Hanshan Dong
Publicado en: Applied Surface Science, Edición 517, 2020, Página(s) 146207, ISSN 0169-4332
Editor: Elsevier BV
DOI: 10.1016/j.apsusc.2020.146207

In vitro cytotoxicity assessment of pristine and carboxyl-functionalized MWCNTs

Autores: K. Kyriakidou, D. Brasinika, A.F.A. Trompeta, E. Bergamaschi, I.K. Karoussis, C.A. Charitidis
Publicado en: Food and Chemical Toxicology, Edición 141, 2020, Página(s) 111374, ISSN 0278-6915
Editor: Elsevier BV
DOI: 10.1016/j.fct.2020.111374

Testing Novel Portland Cement Formulations with Carbon Nanotubes and Intrinsic Properties Revelation: Nanoindentation Analysis with Machine Learning on Microstructure Identification

Autores: Georgios Konstantopoulos, Elias P. Koumoulos, Costas A. Charitidis
Publicado en: Nanomaterials, Edición 10/4, 2020, Página(s) 645, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano10040645

Classification of mechanism of reinforcement in the fiber-matrix interface: Application of Machine Learning on nanoindentation data

Autores: Georgios Konstantopoulos, Elias P. Koumoulos, Costas A. Charitidis
Publicado en: Materials & Design, Edición 192, 2020, Página(s) 108705, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2020.108705

Towards green carbon fibre manufacturing from waste cotton: a microstructural and physical property investigation

Autores: Pravin Jagdale, Elias P. Koumoulos, Irene Cannavaro, Aamer Khan, Micaela Castellino, Dimitrios A. Dragatogiannis, Alberto Tagliaferro, Costas A. Charitidis
Publicado en: Manufacturing Review, Edición 4, 2017, Página(s) 10, ISSN 2265-4224
Editor: EDP Sciencies
DOI: 10.1051/mfreview/2017008

Improving the macro-scale tribology of monolayer graphene oxide coating on stainless steel by a silane bonding layer

Autores: Shaojun Qi, Xiaoying Li, Hanshan Dong
Publicado en: Materials Letters, Edición 209, 2017, Página(s) 15-18, ISSN 0167-577X
Editor: Elsevier BV
DOI: 10.1016/j.matlet.2017.07.087

Lubricity Assessment, Wear and Friction of CNT-Based Structures in Nanoscale

Autores: Elias P. Koumoulos, Costas A. Charitidis
Publicado en: Lubricants, Edición 5/2, 2017, Página(s) 18, ISSN 2075-4442
Editor: MDPI
DOI: 10.3390/lubricants5020018

Comparative Physical–Mechanical Properties Assessment of Tailored Surface-Treated Carbon Fibres

Autores: Dionisis Semitekolos, Aikaterini-Flora Trompeta, Iryna Husarova, Tamara Man’ko, Aleksandr Potapov, Ol'ga Romenskaya, Yana Liang, Xiaoying Li, Mauro Giorcelli, Hanshan Dong, Alberto Tagliaferro, Costas A. Charitidis
Publicado en: Materials, Edición 13/14, 2020, Página(s) 3136, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma13143136

Dynamic Air-Brush Deposition Method for the New Generation of Graphene Based Supercapacitors

Autores: Paolo Bondavalli, Gregory Pognon, Elias Koumoulos, Costas Charitidis
Publicado en: MRS Advances, Edición 3/1-2, 2018, Página(s) 79-84, ISSN 2059-8521
Editor: MRS advances
DOI: 10.1557/adv.2018.65

FE Mechanical properties prediction of CFRP considering different carbon fiber surface treatments

Autores: C. Valero, A. Chiminelli, M. Laspalas, F. Serrano, C.Sáenz
Publicado en: Materiales compuestos, 2019, Página(s) vol 2 , no 4, pag 1-4, ISSN 2531-0739
Editor: Materiales compuestos

Assessing the integrity of CFRPs through nanomechanical mapping: the effect of CF surface modification

Autores: Elias P. Koumoulos, Panagiotis Kainourios, Costas A. Charitidis
Publicado en: International Conference of Engineering Against Failure (ICEAF) Proceedings, 2018, ISSN 2261-236X
Editor: EDP Sciences

Enhancement of Mechanical Integrity of Advanced Composites using PMAA-Electropolymerised CF Fabrics

Autores: Dionysios A. Semitekolos, Panagiotis Goulis, Despoina Batsouli, Elias P. Koumoulos, Loukas Zoumpoulakis and Costas Charitidis
Publicado en: International Conference of Engineering Against Failure (ICEAF) Proceedings, 2018, ISSN 2261-236X
Editor: EDP Sciences

DEVELOPMENT OF A PROCEDURE FOR ACCURATE SIMULATION OF THE RESIN TRANSFER MOULDING PROCESS

Autores: G. Stamatopoulos, D. Modi, C. Lira, N. Pantelelis, M. Stojkovic
Publicado en: 2018
Editor: ECCM18 - 18th European Conference on Composite Materials

Carbon fibre functionalization by plasma treatment for adhesion enhancement on polymers

Autores: Mauro Giorcelli, Salvatore Guastella, Pietro Mandracci, Yana Liang, Xiaoying Li, Alberto Tagliaferro
Publicado en: AIP Conference Proceedings volume 1981, 2018, Página(s) 020142
Editor: Author(s)
DOI: 10.1063/1.5046004

Electrophoretic deposition of carbon nanotubes on carbon fibers

Autores: Christos Argirusis, Elias P. Koumoulos, Constantinos A. Charitidis, Dimitrios A. Dragatogiannis, Georgia Sourkouni
Publicado en: Electrophoretic Deposition VI: Fundamentals and Applications, 2017
Editor: ECI

Multiscale carbon fibre reinforced polymer (CFRP) composites with tailored interfaces

Autores: R. M. Santos, D. Vale, J. Rocha, C. Martins, S. T. Mould, N. Rocha
Publicado en: FFEMS, 2017
Editor: FFEMS

Modified fibre based structure for marine and safety applications

Autores: M.Holt, G.Simmonds, G.Monaghan, S.Bancroft, R.M.Santos, N.Rocha, C.Graham, C.Jones and C.Lira
Publicado en: The 2nd International Conference on Material Strength and Applied Mechanics (MSAM 2019), 2019
Editor: MSAM 2019

Thermal properties of nanomaterials predicted through atomistic-to-continuum models supported by machine learning

Autores: Matteo Fasano, Rajat Srivastava, Annalisa Cardellini, Eliodoro Chiavazzo, Pietro Asinari
Publicado en: VECMA All-Hands Meeting (AHM), 2019
Editor: VECMA

Low percolation threshold in carbon fibre/epoxy composite containing carbon nanotubes for sensing of structural damage

Autores: R. M. Santos,, J. Rocha, M. Silva, N. Rocha
Publicado en: 33rd International Conference of The Polymer Processing Society (PPS-33), 2019
Editor: PPS

Novel Carbon Nanotube grafting on Carbon Fibres through Chemical Vapor Deposition: Investigation of epoxy matrix/fibre interface via nanoindentation test

Autores: S. Termine, A.F. Trompeta, D.A. Dragatogiannis, C.A. Charitidis
Publicado en: 2019
Editor: EASN

LIGHTNING STRIKE NUMERICAL SIMULATION ON COMPOSITE AERONAUTICAL STRUCTURE

Autores: Y. Essa, F.M. de la Escalera, I. Briones
Publicado en: 2019
Editor: YUZ

NUMERICAL MODELLING OF AEROSPACE STRUCTURE SUBJECTED TO LIGHTNING STRIKE PHENOMENON

Autores: Federico Martin de la Escalera, Ignacio Briones , Yasser Essa
Publicado en: 2019
Editor: 9th EASN International Conference on “Innovation in Aviation & Space” which will take place in Athens

USING NANODIAMONDS FOR HIGHER CARBON FIBER STRENGTH

Autores: • Tamara Manko, Oles Honchar Dnipro National University, Dnipro, Ukraine • Olexander Potapov, Iryna Husarova, Angelina Bormotova, Yuzhnoye State Design Office, Dnipro, Ukraine • Evgen Solodky, National Technical University of Ukraine “Kyiv Politechnic Institute”, Kyiv, Ukraine • Costas Charitidis, National Technical University of Athens, Greece
Publicado en: Collection of abstracts of the 7th International Conference “Space Technology: Present and Future”, Edición May 21-24, 2019 Dnipro, 2019, Página(s) 85
Editor: Yuzhnoye State Design Office

EFFECT OF ELECTROCHEMICAL TREATMENT ON FIBER STRENGTH

Autores: • Olexander Potapov, Iryna Husarova, Yuzhnoye State Design Office, Dnipro, Ukraine • Tamara Manko, Oles Honchar Dnipro National University, Dnipro, Ukraine • Costas Charitidis, National Technical University of Athens, Greece
Publicado en: Collection of abstracts of the 7th International Conference “Space Technology: Present and Future”, Edición May 21-24, 2019 Dnipro, 2019, Página(s) 89
Editor: Yuzhnoye State Design Office

Design of Vertical CVD Reactor for Continuous Production of CNTs: Challenges and Perspectives

Autores: A.F. Trompeta, A Ntziouni, G. Konstantopoulos, C. Kordatos, C.A. Charitidis
Publicado en: 2019
Editor: PESXM

Growth of exotic carbon based nanomaterials on challenging substrates through CVD

Autores: A.F. Trompeta, A Ntziouni, G. Konstantopoulos, C. Kordatos, C.A. Charitidis
Publicado en: 2019
Editor: PESXM

DEVELOPMENT OF A NANO-RISK ASSESSMENT TOOL BASED ON A HOLISTIC APPROACΗ

Autores: P. Karayannis, E.P. Koumoulos, C. A. Charitidis
Publicado en: 2019
Editor: PESXM

Applying machine learning to process and characterisation data of nanomaterials: A means for prediction

Autores: E.P. Koumoulos, C. A. Charitidis
Publicado en: 2019
Editor: EuroNanoForum2019

Combining LCC and LCA for sustainability assessment in nanoenhanced high performance composites

Autores: A. Gkika, F. Petrakli, N. Romanos, V. Stergiou, A.F. Trompeta, E.P. Koumoulos, C. A. Charitidis
Publicado en: 2019
Editor: EuroNanoForum2019

Composite material circular economy: the case of “green” fibres and nanoenhanced fibrous polymer composites

Autores: A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C. A. Charitidis
Publicado en: 2019
Editor: EuroNanoForum2019

Using a Data Management Plan for Materials Characterisation in Nanoindentation

Autores: M. Kalogerini, N. Romanos, E.P. Koumoulos, C. A. Charitidis
Publicado en: 2019
Editor: EuroNanoForum2019

Towards novel exposure & risk assessment techniques for nanomaterials

Autores: P.T. Karagiannis, E.P. Koumoulos, C. A. Charitidis
Publicado en: 2019
Editor: EuroNanoForum2019

Manufacturing of polymer composite materials with modified carbon fibres.

Autores: Dionysios Semitekolos
Publicado en: 2018
Editor: NTUA

CFRPs MANUFACTURING WITH FUNCTIONALISED CARBON FIBRES

Autores: DIONYSIOS SEMITEKOLOS
Publicado en: 2018
Editor: NTUA

CFRP manufacturing with Carbon fibres and Carbon Nanotubes via the vacuum infusion technique and investigation of mechanical properties

Autores: Tarnaris Odysseas
Publicado en: 2019
Editor: National Techinal University of Athens School of Chemical Engineering

Analysis of mechanical properties of nanocomposite materials reinforced with functionalized carbon nanotubes based on molecular dynamics simulations

Autores: Francesco Maria Bellussi (Itainnova), Pietro Asinari (POLITO), Agust´ın Chiminelli (Itainnova)
Publicado en: 2019
Editor: POLITO

Controlo de Tensão na Pré-Impregnação de Fibra de Carbono para Aplicações Aeroespaciais (Tension control in the carbon fibre pre-impregnation process for aerospace applications)

Autores: Ruben da Silva Madureira
Publicado en: 2017
Editor: University of Porto

Effect of Surfactants on the Rheological Properties and Microstructure of MWCNT/Epoxy Resin Suspensions

Autores: Carolina Sá da Cruz
Publicado en: 2017
Editor: University of Porto

Development of epoxy-based nanocomposites for multifunctional applications

Autores: Magda Sofia Santos Dias da Silva
Publicado en: 2017
Editor: University of Porto

Modelling carbon-based smart materials

Autores: Rajat Srivastava, Matteo Fasano, Shahin Mohammadnejad, Hern´an Ch´avez Thielemann, Eliodoro Chiavazzo and Pietro Asinari
Publicado en: 2018
Editor: Polito

Editorial for the Special Issue on Carbon Based Electronic Devices

Autores: A. Tagliaferro, C.A. Charitidis
Publicado en: Micromachines, Edición 10, 2019, Página(s) 856
Editor: MDPI
DOI: 10.3390/mi10120856

Carbon-Based Smart Materials

Autores: C.A. Charitidis, E.P. Koumoulos, D.A. Dragatogiannis
Publicado en: Carbon-Based Smart Materials, 2020, ISBN 9783-110479133
Editor: De Gruyter
DOI: 10.1515/9783110479133

Deposition of Graphene and related nanomaterials by dynamic spray-gun method: a new route to implement nanomaterials in real applications

Autores: Paolo Bondavalli,Didier Pribat,Pierre Legagneux,Marie-Blandine Martin,Louiza Hamidouche,Lilia Qassym,Aikaterini Flora Trompeta,Costantinos Charitidis
Publicado en: 2019
Editor: JPMATER

6 Carbon from waste source for Li-ion battery

Autores: P.Jagdale, G. Rius, K. Rajan, J.R. Nair, M. Rovere, A. Tagliaferro, C. Gerbaldi
Publicado en: Carbon-Based Smart Materials, 2020, Página(s) 153-180, ISBN 9783-110479133
Editor: De Gruyter
DOI: 10.1515/9783110479133-006

3 Modeling carbon-based smart materials

Autores: R. Srivastava, M. Fasano, S.M. Nejad, H.C. Thielemann, E. Chiavazzo, P. Asinari
Publicado en: Carbon-Based Smart Materials, 2020, Página(s) 33-80, ISBN 9783-110479133
Editor: De Gruyter
DOI: 10.1515/9783110479133-003

2 Plasma surface activation and functionalization of carbon-based materials

Autores: H. Dong, S.C. Gallo
Publicado en: Carbon-Based Smart Materials, 2020, Página(s) 17-32, ISBN 9783-110479133
Editor: De Gruyter
DOI: 10.1515/9783110479133-002

Resultado final

Publicaciones

Compartir esta página

Descargar