Modified cost effective fibre based structures with improved multi-functionality and performance

Nanoscale thermal properties of carbon nanotubes/epoxy composites by atomistic simulations

Autorzy: Shahin Mohammad Nejad, Rajat Srivastava, Francesco Maria Bellussi, Hernán Chávez Thielemann, Pietro Asinari, Matteo Fasano
Opublikowane w: International Journal of Thermal Sciences, Numer 159, 2021, Strona(/y) 106588, ISSN 1290-0729
Wydawca: Elsevier BV
DOI: 10.1016/j.ijthermalsci.2020.106588

End-of-Life Recycling Options of (Nano)Enhanced CFRP Composite Prototypes Waste—A Life Cycle Perspective

Autorzy: F. Petrakli, A. Gkika, A. Bonou, P. Karayannis, E.P. Koumoulos, D. Semitekolos, A.F Trompeta, N. Rocha, R.M. Santos, G. Simmonds, G. Monaghan, G. Valota, G. Gong, C.A. Charitidis
Opublikowane w: Polymers, Numer 12, 2020, Strona(/y) 2129, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym12092129

Fabrication and characterisation of electro-brush plated nickel-graphene oxide nano-composite coatings

Autorzy: Shaojun Qi, Xiaoying Li, Zhenxue Zhang, Hanshan Dong
Opublikowane w: Thin Solid Films, 2017, ISSN 0040-6090
Wydawca: Elsevier Sequoia
DOI: 10.1016/j.tsf.2017.06.064

Low-Cost Carbon Fillers to Improve Mechanical Properties and Conductivity of Epoxy Composites

Autorzy: Aamer Khan, Patrizia Savi, Simone Quaranta, Massimo Rovere, Mauro Giorcelli, Alberto Tagliaferro, Carlo Rosso, Charles Jia
Opublikowane w: Polymers, Numer 9/12, 2017, Strona(/y) 642, ISSN 2073-4360
Wydawca: DMPI
DOI: 10.3390/polym9120642

Sliding Dynamics of Parallel Graphene Sheets: Effect of Geometry and Van Der Waals Interactions on Nano-Spring Behavior

Autorzy: Alessandro Crisafulli, Ali Khodayari, Shahin Mohammadnejad, Matteo Fasano
Opublikowane w: Crystals, Numer 8/4, 2018, Strona(/y) 149, ISSN 2073-4352
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/cryst8040149

Interface Characterization of Epoxy Resin Nanocomposites: A Molecular Dynamics Approach

Autorzy: Carlos Sáenz Ezquerro, Manuel Laspalas, Agustín Chiminelli, Francisco Serrano, Clara Valero
Opublikowane w: Fibers, Numer 6/3, 2018, Strona(/y) 54, ISSN 2079-6439
Wydawca: Fibers 2018, MDPI
DOI: 10.3390/fib6030054

Viscoelastic response of carbon fibre reinforced polymer during push-out tests

Autorzy: Santiago Corujeira Gallo, Xiaoying Li, Zhenxue Zhang, Constantinos Charitidis, Hanshan Dong
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 112, 2018, Strona(/y) 178-185, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2018.06.003

Advanced carbon fibre composites via poly methacrylic acid surface treatment; surface analysis and mechanical properties investigation

Autorzy: Dionisis Semitekolos, Panagiotis Kainourgios, Craig Jones, Amit Rana, Elias P. Koumoulos, Costas A. Charitidis
Opublikowane w: Composites Part B: Engineering, Numer 155, 2018, Strona(/y) 237-243, ISSN 1359-8368
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2018.08.027

Development of Electrophoretic Deposition Prototype for Continuous Production of Carbon Nanotube-Modified Carbon Fiber Fabrics Used in High-Performance Multifunctional Composites

Autorzy: Guan Gong, Birgitha Nyström, Erik Sandlund, Daniel Eklund, Maxime Noël, Robert Westerlund, Sofia Stenberg, Liva Pupure, Andrejs Pupurs, Roberts Joffe
Opublikowane w: Fibers, Numer 6/4, 2018, Strona(/y) 71, ISSN 2079-6439
Wydawca: MDPI
DOI: 10.3390/fib6040071

Heat transfer at the interface of graphene nanoribbons with various relative orientations and gaps

Autorzy: Shahin Mohammadnejad, Masoud Bozorg Bigdeli, Rajat Srivastava and Matteo Fasano
Opublikowane w: MDPI, 2019, ISSN 2073-4360
Wydawca: MDPI

Nano-Graphitic based Non-Volatile Memories Fabricated by the Dynamic Spray-Gun Deposition Method

Autorzy: Paolo Bondavalli, Marie Martin, Louiza Hamidouche, Alberto Montanaro, Aikaterini-Flora Trompeta, Costas Charitidis
Opublikowane w: Micromachines, Numer 10/2, 2019, Strona(/y) 95, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10020095

Synergetic effects of carbon nanotube-graphene nanoplatelet hybrids in carbon fibre reinforced polymer composites

Autorzy: Magda Silva, Diogo Vale, Jéssica Rocha, Nuno Rocha, Raquel Miriam Santos
Opublikowane w: MATEC Web of Conferences, Numer 188, 2018, Strona(/y) 01015, ISSN 2261-236X
Wydawca: ICEAF-V
DOI: 10.1051/matecconf/201818801015

Assessing the Critical Multifunctionality Threshold for Optimal Electrical, Thermal, and Nanomechanical Properties of Carbon Nanotubes/Epoxy Nanocomposites for Aerospace Applications

Autorzy: Aikaterini-Flora Trompeta, Elias Koumoulos, Sotirios Stavropoulos, Theodoros Velmachos, Georgios Psarras, Costas Charitidis
Opublikowane w: Aerospace, Numer 6/1, 2019, Strona(/y) 7, ISSN 2226-4310
Wydawca: MDPI
DOI: 10.3390/aerospace6010007

Integrity of Carbon-Fibre Epoxy Composites through a Nanomechanical Mapping Protocol towards Quality Assurance

Autorzy: Elias Koumoulos, Costas Charitidis
Opublikowane w: Fibers, Numer 6/4, 2018, Strona(/y) 78, ISSN 2079-6439
Wydawca: MDPI
DOI: 10.3390/fib6040078

Biochar as a cheap and environmental friendly filler able to improve polymer mechanical properties

Autorzy: Mauro Giorcelli, Aamer Khan, Nicola M. Pugno, Carlo Rosso, Alberto Tagliaferro
Opublikowane w: Biomass and Bioenergy, Numer 120, 2019, Strona(/y) 219-223, ISSN 0961-9534
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.biombioe.2018.11.036

Mesoscopic Moment Equations for Heat Conduction: Characteristic Features and Slow–Fast Mode Decomposition

Autorzy: Luca Bergamasco, Matteo Alberghini, Matteo Fasano, Annalisa Cardellini, Eliodoro Chiavazzo and Pietro Asinari
Opublikowane w: Entropy, Numer 20/2, 2018, Strona(/y) 126, ISSN 1099-4300
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/e20020126

Plasma Surface Functionalization of Carbon Nanofibres with Silver, Palladium and Platinum Nanoparticles for Cost-Effective and High-Performance Supercapacitors

Autorzy: Zelun Li, Shaojun Qi, Yana Liang, Zhenxue Zhang, Xiaoying Li, Hanshan Dong
Opublikowane w: Micromachines, Numer 10/1, 2019, Strona(/y) 2, ISSN 2072-666X
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi10010002

Analysis of the elastic properties of CNTs and their effect in polymer nanocomposites

Autorzy: Manuel Laspalas, Agustín Chiminelli, Carlos Saenz, Francisco Serrano, Clara Valero
Opublikowane w: MATEC Web of Conferences, Numer 188, 2018, Strona(/y) 01018, ISSN 2261-236X
Wydawca: ICEAF-V
DOI: 10.1051/matecconf/201818801018

Study on the carbon nanotubes reinforced nanocomposite coatings

Autorzy: Xiaochao Ji, Xiaoying Li, Helong Yu, Wei Zhang, Hanshan Dong
Opublikowane w: Diamond and Related Materials, Numer 91, 2019, Strona(/y) 247-254, ISSN 0925-9635
Wydawca: Elsevier BV
DOI: 10.1016/j.diamond.2018.11.027

Heat Transfer at the Interface of Graphene Nanoribbons with Different Relative Orientations and Gaps

Autorzy: Shahin Mohammad Nejad, Masoud Bozorg Bigdeli , Rajat Srivastava and Matteo Fasano
Opublikowane w: Energies, 2019, ISSN 1996-1073
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en12050796

Multiscale carbon fibre–reinforced polymer ( CFRP ) composites containing carbon nanotubes with tailored interfaces

Autorzy: Raquel M. Santos, Diogo Vale, Jéssica Rocha, Carla Martins, Sacha T. Mould, Nuno Rocha
Opublikowane w: Fatigue & Fracture of Engineering Materials & Structures, 2019, ISSN 8756-758X
Wydawca: Blackwell Publishing Inc.
DOI: 10.1111/ffe.13006

Production and 3D printing processing of bio-based thermoplastic filament

Autorzy: Eleni Gkartzou, Elias P. Koumoulos, Costas A. Charitidis
Opublikowane w: Manufacturing Review, Numer 4, 2017, Strona(/y) 1, ISSN 2265-4224
Wydawca: EDP Open
DOI: 10.1051/mfreview/2016020

Surface analysis and mechanical behaviour mapping of vertically aligned CNT forest array through nanoindentation

Autorzy: Elias P. Koumoulos, C.A. Charitidis
Opublikowane w: Applied Surface Science, Numer Volume 396, 2017, Strona(/y) 681–687, ISSN 0169-4332
Wydawca: Elsevier BV
DOI: 10.1016/j.apsusc.2016.11.008

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Autorzy: Elias P. Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A. Charitidis
Opublikowane w: Journal of Composites Science, Numer 3/3, 2019, Strona(/y) 86, ISSN 2504-477X
Wydawca: MDPI
DOI: 10.3390/jcs3030086

Constituents Phase Reconstruction through Applied Machine Learning in Nanoindentation Mapping Data of Mortar Surface

Autorzy: Elias P. Koumoulos, Konstantinos Paraskevoudis, Costas A. Charitidis
Opublikowane w: Journal of Composites Science, Numer 3/3, 2019, Strona(/y) 63, ISSN 2504-477X
Wydawca: MDPI
DOI: 10.3390/jcs3030063

Evaluation of the creep behaviour of the carbon fibre in an unidirectional pultruded reinforced composite using nano-indentation technique

Autorzy: Zhenxue Zhang, Santiago Corujeira Gallo, Xiaoying Li, Hanshan Dong, Dimitrios Dragatogiannis, Costas A. Charitidis
Opublikowane w: Polymer Testing, Numer 80, 2019, Strona(/y) 106091, ISSN 0142-9418
Wydawca: Elsevier BV
DOI: 10.1016/j.polymertesting.2019.106091

Enhancement of mechanical integrity of advanced composites using PMAA-electropolymerised CF fabrics

Autorzy: Dionisis Semitekolos, Panagiotis Goulis, Despoina Batsouli, Elias P. Koumoulos, Loukas Zoumpoulakis, Costas A. Charitidis
Opublikowane w: International Journal of Structural Integrity, Numer ahead-of-print/ahead-of-print, 2019, ISSN 1757-9864
Wydawca: Emerald Group Publishing Ltd.
DOI: 10.1108/ijsi-08-2018-0050

Deposition of graphene and related nanomaterials by dynamic spray-gun method: a new route to implement nanomaterials in real applications

Autorzy: Paolo Bondavalli, Didier Pribat, Pierre Legagneux, Marie-Blandine Martin, Louiza Hamidouche, Lilia Qassym, Gilles Feugnet, Aikaterini-Flora Trompeta, Constantinos A Charitidis
Opublikowane w: Journal of Physics: Materials, Numer 2/3, 2019, Strona(/y) 032002, ISSN 2515-7639
Wydawca: IOP Science
DOI: 10.1088/2515-7639/ab1795

Enhanced properties of PAN‐derived carbon fibres and resulting composites by active screen plasma surface functionalisation

Autorzy: Yana Liang, Xiaoying Li, Dionisis Semitekolos, Costas A. Charitidis, Hanshan Dong
Opublikowane w: Plasma Processes and Polymers, 2020, ISSN 1612-8850
Wydawca: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/ppap.201900252

Applying Machine Learning to Nanoindentation Data of (Nano-) Enhanced Composites

Autorzy: Elias Koumoulos, George Konstantopoulos, Costas Charitidis
Opublikowane w: Fibers, Numer 8/1, 2020, Strona(/y) 3, ISSN 2079-6439
Wydawca: Fibers
DOI: 10.3390/fib8010003

Synthesis and in-vitro antibacterial properties of the novel Ag wires reinforced carbon based composite coatings

Autorzy: Xiaochao Ji, Yangchun Dong, Xiaoying Li, Helong Yu, Tian Ma, Wei Zhang, Hanshan Dong
Opublikowane w: Applied Surface Science, Numer 517, 2020, Strona(/y) 146207, ISSN 0169-4332
Wydawca: Elsevier BV
DOI: 10.1016/j.apsusc.2020.146207

In vitro cytotoxicity assessment of pristine and carboxyl-functionalized MWCNTs

Autorzy: K. Kyriakidou, D. Brasinika, A.F.A. Trompeta, E. Bergamaschi, I.K. Karoussis, C.A. Charitidis
Opublikowane w: Food and Chemical Toxicology, Numer 141, 2020, Strona(/y) 111374, ISSN 0278-6915
Wydawca: Elsevier BV
DOI: 10.1016/j.fct.2020.111374

Testing Novel Portland Cement Formulations with Carbon Nanotubes and Intrinsic Properties Revelation: Nanoindentation Analysis with Machine Learning on Microstructure Identification

Autorzy: Georgios Konstantopoulos, Elias P. Koumoulos, Costas A. Charitidis
Opublikowane w: Nanomaterials, Numer 10/4, 2020, Strona(/y) 645, ISSN 2079-4991
Wydawca: MDPI
DOI: 10.3390/nano10040645

Classification of mechanism of reinforcement in the fiber-matrix interface: Application of Machine Learning on nanoindentation data

Autorzy: Georgios Konstantopoulos, Elias P. Koumoulos, Costas A. Charitidis
Opublikowane w: Materials & Design, Numer 192, 2020, Strona(/y) 108705, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/j.matdes.2020.108705

Towards green carbon fibre manufacturing from waste cotton: a microstructural and physical property investigation

Autorzy: Pravin Jagdale, Elias P. Koumoulos, Irene Cannavaro, Aamer Khan, Micaela Castellino, Dimitrios A. Dragatogiannis, Alberto Tagliaferro, Costas A. Charitidis
Opublikowane w: Manufacturing Review, Numer 4, 2017, Strona(/y) 10, ISSN 2265-4224
Wydawca: EDP Sciencies
DOI: 10.1051/mfreview/2017008

Improving the macro-scale tribology of monolayer graphene oxide coating on stainless steel by a silane bonding layer

Autorzy: Shaojun Qi, Xiaoying Li, Hanshan Dong
Opublikowane w: Materials Letters, Numer 209, 2017, Strona(/y) 15-18, ISSN 0167-577X
Wydawca: Elsevier BV
DOI: 10.1016/j.matlet.2017.07.087

Lubricity Assessment, Wear and Friction of CNT-Based Structures in Nanoscale

Autorzy: Elias P. Koumoulos, Costas A. Charitidis
Opublikowane w: Lubricants, Numer 5/2, 2017, Strona(/y) 18, ISSN 2075-4442
Wydawca: MDPI
DOI: 10.3390/lubricants5020018

Comparative Physical–Mechanical Properties Assessment of Tailored Surface-Treated Carbon Fibres

Autorzy: Dionisis Semitekolos, Aikaterini-Flora Trompeta, Iryna Husarova, Tamara Man’ko, Aleksandr Potapov, Ol'ga Romenskaya, Yana Liang, Xiaoying Li, Mauro Giorcelli, Hanshan Dong, Alberto Tagliaferro, Costas A. Charitidis
Opublikowane w: Materials, Numer 13/14, 2020, Strona(/y) 3136, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma13143136

Dynamic Air-Brush Deposition Method for the New Generation of Graphene Based Supercapacitors

Autorzy: Paolo Bondavalli, Gregory Pognon, Elias Koumoulos, Costas Charitidis
Opublikowane w: MRS Advances, Numer 3/1-2, 2018, Strona(/y) 79-84, ISSN 2059-8521
Wydawca: MRS advances
DOI: 10.1557/adv.2018.65

FE Mechanical properties prediction of CFRP considering different carbon fiber surface treatments

Autorzy: C. Valero, A. Chiminelli, M. Laspalas, F. Serrano, C.Sáenz
Opublikowane w: Materiales compuestos, 2019, Strona(/y) vol 2 , no 4, pag 1-4, ISSN 2531-0739
Wydawca: Materiales compuestos

Assessing the integrity of CFRPs through nanomechanical mapping: the effect of CF surface modification

Autorzy: Elias P. Koumoulos, Panagiotis Kainourios, Costas A. Charitidis
Opublikowane w: International Conference of Engineering Against Failure (ICEAF) Proceedings, 2018, ISSN 2261-236X
Wydawca: EDP Sciences

Enhancement of Mechanical Integrity of Advanced Composites using PMAA-Electropolymerised CF Fabrics

Autorzy: Dionysios A. Semitekolos, Panagiotis Goulis, Despoina Batsouli, Elias P. Koumoulos, Loukas Zoumpoulakis and Costas Charitidis
Opublikowane w: International Conference of Engineering Against Failure (ICEAF) Proceedings, 2018, ISSN 2261-236X
Wydawca: EDP Sciences

DEVELOPMENT OF A PROCEDURE FOR ACCURATE SIMULATION OF THE RESIN TRANSFER MOULDING PROCESS

Autorzy: G. Stamatopoulos, D. Modi, C. Lira, N. Pantelelis, M. Stojkovic
Opublikowane w: 2018
Wydawca: ECCM18 - 18th European Conference on Composite Materials

Carbon fibre functionalization by plasma treatment for adhesion enhancement on polymers

Autorzy: Mauro Giorcelli, Salvatore Guastella, Pietro Mandracci, Yana Liang, Xiaoying Li, Alberto Tagliaferro
Opublikowane w: AIP Conference Proceedings volume 1981, 2018, Strona(/y) 020142
Wydawca: Author(s)
DOI: 10.1063/1.5046004

Electrophoretic deposition of carbon nanotubes on carbon fibers

Autorzy: Christos Argirusis, Elias P. Koumoulos, Constantinos A. Charitidis, Dimitrios A. Dragatogiannis, Georgia Sourkouni
Opublikowane w: Electrophoretic Deposition VI: Fundamentals and Applications, 2017
Wydawca: ECI

Multiscale carbon fibre reinforced polymer (CFRP) composites with tailored interfaces

Autorzy: R. M. Santos, D. Vale, J. Rocha, C. Martins, S. T. Mould, N. Rocha
Opublikowane w: FFEMS, 2017
Wydawca: FFEMS

Modified fibre based structure for marine and safety applications

Autorzy: M.Holt, G.Simmonds, G.Monaghan, S.Bancroft, R.M.Santos, N.Rocha, C.Graham, C.Jones and C.Lira
Opublikowane w: The 2nd International Conference on Material Strength and Applied Mechanics (MSAM 2019), 2019
Wydawca: MSAM 2019

Thermal properties of nanomaterials predicted through atomistic-to-continuum models supported by machine learning

Autorzy: Matteo Fasano, Rajat Srivastava, Annalisa Cardellini, Eliodoro Chiavazzo, Pietro Asinari
Opublikowane w: VECMA All-Hands Meeting (AHM), 2019
Wydawca: VECMA

Low percolation threshold in carbon fibre/epoxy composite containing carbon nanotubes for sensing of structural damage

Autorzy: R. M. Santos,, J. Rocha, M. Silva, N. Rocha
Opublikowane w: 33rd International Conference of The Polymer Processing Society (PPS-33), 2019
Wydawca: PPS

Novel Carbon Nanotube grafting on Carbon Fibres through Chemical Vapor Deposition: Investigation of epoxy matrix/fibre interface via nanoindentation test

Autorzy: S. Termine, A.F. Trompeta, D.A. Dragatogiannis, C.A. Charitidis
Opublikowane w: 2019
Wydawca: EASN

LIGHTNING STRIKE NUMERICAL SIMULATION ON COMPOSITE AERONAUTICAL STRUCTURE

Autorzy: Y. Essa, F.M. de la Escalera, I. Briones
Opublikowane w: 2019
Wydawca: YUZ

NUMERICAL MODELLING OF AEROSPACE STRUCTURE SUBJECTED TO LIGHTNING STRIKE PHENOMENON

Autorzy: Federico Martin de la Escalera, Ignacio Briones , Yasser Essa
Opublikowane w: 2019
Wydawca: 9th EASN International Conference on “Innovation in Aviation & Space” which will take place in Athens

USING NANODIAMONDS FOR HIGHER CARBON FIBER STRENGTH

Autorzy: • Tamara Manko, Oles Honchar Dnipro National University, Dnipro, Ukraine • Olexander Potapov, Iryna Husarova, Angelina Bormotova, Yuzhnoye State Design Office, Dnipro, Ukraine • Evgen Solodky, National Technical University of Ukraine “Kyiv Politechnic Institute”, Kyiv, Ukraine • Costas Charitidis, National Technical University of Athens, Greece
Opublikowane w: Collection of abstracts of the 7th International Conference “Space Technology: Present and Future”, Numer May 21-24, 2019 Dnipro, 2019, Strona(/y) 85
Wydawca: Yuzhnoye State Design Office

EFFECT OF ELECTROCHEMICAL TREATMENT ON FIBER STRENGTH

Autorzy: • Olexander Potapov, Iryna Husarova, Yuzhnoye State Design Office, Dnipro, Ukraine • Tamara Manko, Oles Honchar Dnipro National University, Dnipro, Ukraine • Costas Charitidis, National Technical University of Athens, Greece
Opublikowane w: Collection of abstracts of the 7th International Conference “Space Technology: Present and Future”, Numer May 21-24, 2019 Dnipro, 2019, Strona(/y) 89
Wydawca: Yuzhnoye State Design Office

Design of Vertical CVD Reactor for Continuous Production of CNTs: Challenges and Perspectives

Autorzy: A.F. Trompeta, A Ntziouni, G. Konstantopoulos, C. Kordatos, C.A. Charitidis
Opublikowane w: 2019
Wydawca: PESXM

Growth of exotic carbon based nanomaterials on challenging substrates through CVD

Autorzy: A.F. Trompeta, A Ntziouni, G. Konstantopoulos, C. Kordatos, C.A. Charitidis
Opublikowane w: 2019
Wydawca: PESXM

DEVELOPMENT OF A NANO-RISK ASSESSMENT TOOL BASED ON A HOLISTIC APPROACΗ

Autorzy: P. Karayannis, E.P. Koumoulos, C. A. Charitidis
Opublikowane w: 2019
Wydawca: PESXM

Applying machine learning to process and characterisation data of nanomaterials: A means for prediction

Autorzy: E.P. Koumoulos, C. A. Charitidis
Opublikowane w: 2019
Wydawca: EuroNanoForum2019

Combining LCC and LCA for sustainability assessment in nanoenhanced high performance composites

Autorzy: A. Gkika, F. Petrakli, N. Romanos, V. Stergiou, A.F. Trompeta, E.P. Koumoulos, C. A. Charitidis
Opublikowane w: 2019
Wydawca: EuroNanoForum2019

Composite material circular economy: the case of “green” fibres and nanoenhanced fibrous polymer composites

Autorzy: A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C. A. Charitidis
Opublikowane w: 2019
Wydawca: EuroNanoForum2019

Using a Data Management Plan for Materials Characterisation in Nanoindentation

Autorzy: M. Kalogerini, N. Romanos, E.P. Koumoulos, C. A. Charitidis
Opublikowane w: 2019
Wydawca: EuroNanoForum2019

Towards novel exposure & risk assessment techniques for nanomaterials

Autorzy: P.T. Karagiannis, E.P. Koumoulos, C. A. Charitidis
Opublikowane w: 2019
Wydawca: EuroNanoForum2019

Manufacturing of polymer composite materials with modified carbon fibres.

Autorzy: Dionysios Semitekolos
Opublikowane w: 2018
Wydawca: NTUA

CFRPs MANUFACTURING WITH FUNCTIONALISED CARBON FIBRES

Autorzy: DIONYSIOS SEMITEKOLOS
Opublikowane w: 2018
Wydawca: NTUA

CFRP manufacturing with Carbon fibres and Carbon Nanotubes via the vacuum infusion technique and investigation of mechanical properties

Autorzy: Tarnaris Odysseas
Opublikowane w: 2019
Wydawca: National Techinal University of Athens School of Chemical Engineering

Analysis of mechanical properties of nanocomposite materials reinforced with functionalized carbon nanotubes based on molecular dynamics simulations

Autorzy: Francesco Maria Bellussi (Itainnova), Pietro Asinari (POLITO), Agust´ın Chiminelli (Itainnova)
Opublikowane w: 2019
Wydawca: POLITO

Controlo de Tensão na Pré-Impregnação de Fibra de Carbono para Aplicações Aeroespaciais (Tension control in the carbon fibre pre-impregnation process for aerospace applications)

Autorzy: Ruben da Silva Madureira
Opublikowane w: 2017
Wydawca: University of Porto

Effect of Surfactants on the Rheological Properties and Microstructure of MWCNT/Epoxy Resin Suspensions

Autorzy: Carolina Sá da Cruz
Opublikowane w: 2017
Wydawca: University of Porto

Development of epoxy-based nanocomposites for multifunctional applications

Autorzy: Magda Sofia Santos Dias da Silva
Opublikowane w: 2017
Wydawca: University of Porto

Modelling carbon-based smart materials

Autorzy: Rajat Srivastava, Matteo Fasano, Shahin Mohammadnejad, Hern´an Ch´avez Thielemann, Eliodoro Chiavazzo and Pietro Asinari
Opublikowane w: 2018
Wydawca: Polito

Editorial for the Special Issue on Carbon Based Electronic Devices

Autorzy: A. Tagliaferro, C.A. Charitidis
Opublikowane w: Micromachines, Numer 10, 2019, Strona(/y) 856
Wydawca: MDPI
DOI: 10.3390/mi10120856

Carbon-Based Smart Materials

Autorzy: C.A. Charitidis, E.P. Koumoulos, D.A. Dragatogiannis
Opublikowane w: Carbon-Based Smart Materials, 2020, ISBN 9783-110479133
Wydawca: De Gruyter
DOI: 10.1515/9783110479133

Deposition of Graphene and related nanomaterials by dynamic spray-gun method: a new route to implement nanomaterials in real applications

Autorzy: Paolo Bondavalli,Didier Pribat,Pierre Legagneux,Marie-Blandine Martin,Louiza Hamidouche,Lilia Qassym,Aikaterini Flora Trompeta,Costantinos Charitidis
Opublikowane w: 2019
Wydawca: JPMATER

6 Carbon from waste source for Li-ion battery

Autorzy: P.Jagdale, G. Rius, K. Rajan, J.R. Nair, M. Rovere, A. Tagliaferro, C. Gerbaldi
Opublikowane w: Carbon-Based Smart Materials, 2020, Strona(/y) 153-180, ISBN 9783-110479133
Wydawca: De Gruyter
DOI: 10.1515/9783110479133-006

3 Modeling carbon-based smart materials

Autorzy: R. Srivastava, M. Fasano, S.M. Nejad, H.C. Thielemann, E. Chiavazzo, P. Asinari
Opublikowane w: Carbon-Based Smart Materials, 2020, Strona(/y) 33-80, ISBN 9783-110479133
Wydawca: De Gruyter
DOI: 10.1515/9783110479133-003

2 Plasma surface activation and functionalization of carbon-based materials

Autorzy: H. Dong, S.C. Gallo
Opublikowane w: Carbon-Based Smart Materials, 2020, Strona(/y) 17-32, ISBN 9783-110479133
Wydawca: De Gruyter
DOI: 10.1515/9783110479133-002

Rezultaty

Publikacje

Udostępnij tę stronę Udostępnij tę stronę w mediach społecznościowych

Pobierz Pobierz zawartość strony