Objectif
The goal of the project is to develop high performance turbocharger for aeronautical application. This machine will allow increasing power density, efficiency and maintainability of the aeronautical piston engine. Key objectives for the equipment are:
• High compressor pressure ratio (up to approx. 5:1)
• High corrected compressor air flow rate (up to 350 g/sec)
• Capability to be used in broad range of altitude (min. 6000m) and temperatures (ISA +/- 35°C)
• Capability to cope with high gyroscopic loads (up to 9G and 4 rad/sec in all directions)
• Long endurance at high loads (MTBF at least 1200hrs, with inspection interval min 500hrs)
• Low maintenance and high robustness, with emphasis on capability to cope with oil pollution and flow variation, including ability to operate without oil for certain amount of time)
• Capable to operate without wastegate and actuator
• Low weight
• Aeronautical certificability
Project targets will be evaluated by performing testing on the gas stand modified to meet specific requirements of the project. After the tests Post Test Analysis will be performed to assess condition of the parts and create recommendation for further developments aiming on having turbocharger ready for certification and production.
Champ scientifique
- engineering and technologyenvironmental engineeringenergy and fuelsliquid fuels
- engineering and technologymechanical engineeringtribologylubrication
- agricultural sciencesagriculture, forestry, and fisheriesagriculturehorticulturefruit growing
- natural sciencesphysical sciencesclassical mechanicsfluid mechanicsfluid dynamicscomputational fluid dynamics
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
Programme(s)
Régime de financement
CS2-IA - Innovation actionCoordinateur
68169 MANNHEIM
Allemagne