Next generation of superhard non-CRM materials and solutions in tooling

Risultati finali

20 publications either in international journals or through relevant conferences
Public website online
Stakeholders workshops

Tool Cost to Performance Ratio
Wear model
Report on performance analysis
Second report on task 1.1
Tool design
First report on task 1.1
Report on specialized setups

Pubblicazioni

Development of a simulation model to study tool loads in pcBN when machining AISI 316L

Autori: Mathias Agmell, Volodymyr Bushlya, Sampsa V. A. Laakso, Aylin Ahadi, Jan-Eric Ståhl
Pubblicato in: The International Journal of Advanced Manufacturing Technology, Numero 96/5-8, 2018, Pagina/e 2853-2865, ISSN 0268-3768
Editore: Springer Verlag
DOI: 10.1007/s00170-018-1673-y

Influence of oxygen on the tool wear in machining

Autori: Volodymyr Bushlya, Filip Lenrick, Jan-Eric Ståhl, Rachid M’Saoubi
Pubblicato in: CIRP Annals, Numero 67/1, 2018, Pagina/e 79-82, ISSN 0007-8506
Editore: Hallwag AG
DOI: 10.1016/j.cirp.2018.03.011

Influence of GnP additive to vegetable oil on machining performance when MQL-assisted turning Alloy 718

Autori: Oleksandr Gutnichenko, Volodymyr Bushlya, Sverker Bihagen, Jan-Eric Ståhl
Pubblicato in: Procedia Manufacturing, Numero 25, 2018, Pagina/e 330-337, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2018.06.091

Application of Colding tool life equation on the drilling fiber reinforcement polymers

Autori: Andrew Hrechuk, Daniel Johansson, Volodymyr Bushlya, Leonid Devin, Jan-Eric Ståhl
Pubblicato in: Procedia Manufacturing, Numero 25, 2018, Pagina/e 302-308, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2018.06.087

Equivalent Chip Thickness and its Influence on Tool Life

Autori: Daniel Johansson, Rebecka Lindvall, Malin Fröström, Volodymyr Bushlya, Jan-Eric Ståhl
Pubblicato in: Procedia Manufacturing, Numero 25, 2018, Pagina/e 344-350, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2018.06.102

Selecting Cutting Data Tests for Cutting Data Modeling Using the Colding Tool Life Model

Autori: Daniel Johansson, Ville Akujärvi, Sören Hägglund, Volodymyr Bushlya, Jan-Eric Ståhl
Pubblicato in: Procedia CIRP, Numero 72, 2018, Pagina/e 197-201, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2018.03.035

An inverse problem for retrieving time dependency of heat flux in metal cutting via linear programming

Autori: V. Kryzhanivskyy, O. Shupikov, V. Bushlya, O. Gutnichenko, M. Hörndahl, R. M’Saoubi, J.-E. Ståhl
Pubblicato in: Procedia Manufacturing, Numero 25, 2018, Pagina/e 287-293, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2018.06.085

Heat flux in metal cutting: Experiment, model, and comparative analysis

Autori: V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, R. M'Saoubi, J.-E. Ståhl
Pubblicato in: International Journal of Machine Tools and Manufacture, Numero 134, 2018, Pagina/e 81-97, ISSN 0890-6955
Editore: Elsevier BV
DOI: 10.1016/j.ijmachtools.2018.07.002

Investigation of the mechanical properties and cutting performance of cBN-based cutting tools with Cr 3 C 2 binder phase.

Autori: Kateryna Slipchenko, Igor Petrusha, Vladimir Turkevich, Jakob Johansson, Volodymyr Bushlya, Jan-Eric Ståhl
Pubblicato in: Procedia CIRP, Numero 72, 2018, Pagina/e 1433-1438, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2018.03.180

CPR a general Cost Performance Ratio in Manufacturing-A KPI for judgement of different technologies and development scenarios

Autori: Christina Windmark, Volodymyr Bushlya, Jan-Eric Ståhl
Pubblicato in: Procedia CIRP, Numero 72, 2018, Pagina/e 1220-1226, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2018.03.106

Assessment of Commonly used Tool Life Models in Metal Cutting

Autori: Daniel Johansson, Sören Hägglund, Volodymyr Bushlya, Jan-Eric Ståhl
Pubblicato in: Procedia Manufacturing, Numero 11, 2017, Pagina/e 602-609, ISSN 2351-9789
Editore: Elsevier
DOI: 10.1016/j.promfg.2017.07.154

Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning

Autori: Oleksandr Gutnichenko, Volodymyr Bushlya, Sverker Bihagen, Jan-Eric Ståhl
Pubblicato in: Procedia CIRP, Numero 77, 2018, Pagina/e 437-440, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2018.08.281

Features of the Formation of Structure and Phase Composition in the Process of Reactive Sintering of Cubic Boron Nitride with Ti, Cr, V Compounds

Autori: Slipchenko, K. V., Petrusha, I. A., Turkevich, V. Z., Bushlya, V. M. & Stahl J.-E.
Pubblicato in: Metallofiz Noveishie Tekhnol, Numero No40 2018, 2018, Pagina/e 1081-1091, ISSN 1024-1809
Editore: National'na Akademiya Nauk Ukrainy

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution

Autori: Kryzhanivskyy, V., Bushlya, V., Gutnichenko, O., M’Saoubi, R., Ståhl, J.-E.
Pubblicato in: Journal of Superhard Materials, Numero Volume 39 (3), 2017, Pagina/e 192-202, ISSN 1063-4576
Editore: Springer Verlag

Superhard pcBN materials with chromium compounds as a binder

Autori: Kolabylina, T., Bushlya, V., Petrusha, I., Johansson, D., Ståhl, J.-E., Turkevich, V.
Pubblicato in: Journal of Superhard Materials, Numero Volume 39 (3), 2017, Pagina/e 155-165, ISSN 1063-4576
Editore: Springer Verlag

Sensitivity of Colding tool life equation on the dimensions of experimental dataset

Autori: D. Johansson, S. Hägglund, V. Bushlya, J.-E. Ståhl
Pubblicato in: Journal of Superhard Materials, Numero Volume 39 (4), 2017, Pagina/e 67-79, ISSN 1063-4576
Editore: Springer Verlag

WC-Co-Re cemented carbides: Structure, properties and potential applications

Autori: I. Konyashin, S. Farag, B. Ries, B. Roebuck
Pubblicato in: International Journal of Refractory Metals, Numero Volume 78, 2018, 2018, Pagina/e 247-253, ISSN 0263-4368
Editore: Elsevier BV

Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder: Structure, properties, application

Autori: Kolabylina, T., Bushlya, V., Petrusha, I., Johansson, D., Ståhl, J.-E., Turkevich, V.
Pubblicato in: Journal of Superhard Materials, Numero Volume 39 (3), 2017, Pagina/e 155-165, ISSN 1063-4576
Editore: Springer Verlag

Boron monosulfide: Equation of state and pressure-induced phase transition

Autori: K. A. Cherednichenko, I. A. Kruglov, A. R. Oganov, Y. Le Godec, M. Mezouar, V. L. Solozhenko
Pubblicato in: Journal of Applied Physics, Numero 123/13, 2018, Pagina/e 135903, ISSN 0021-8979
Editore: American Institute of Physics
DOI: 10.1063/1.5025164

Equation of state of boron subarsenide B 12 As2 to 47 GPa

Autori: Kirill A. Cherednichenko, Yann Le Godec, Vladimir L. Solozhenko
Pubblicato in: High Pressure Research, Numero 38/3, 2018, Pagina/e 224-231, ISSN 0895-7959
Editore: Taylor & Francis
DOI: 10.1080/08957959.2018.1476507

Mechanical properties of superhard boron subnitride B13N2

Autori: V. L. Solozhenko, V. Bushlya
Pubblicato in: Journal of Superhard Materials, Numero 39/6, 2017, Pagina/e 422-426, ISSN 1063-4576
Editore: Springer Verlag
DOI: 10.3103/s1063457617060065

On melting of boron subnitride B13N2 under pressure

Autori: V. L. Solozhenko, V. A. Mukhanov
Pubblicato in: Journal of Superhard Materials, Numero 39/2, 2017, Pagina/e 147-148, ISSN 1063-4576
Editore: Springer Verlag
DOI: 10.3103/s1063457617020113

Phase Diagram of the B–BN System at Pressures up to 24 GPa: Experimental Study and Thermodynamic Analysis

Autori: Vladimir L. Solozhenko, Vladimir Z. Turkevich
Pubblicato in: The Journal of Physical Chemistry C, Numero 122/15, 2018, Pagina/e 8505-8509, ISSN 1932-7447
Editore: American Chemical Society
DOI: 10.1021/acs.jpcc.8b00102

Structure and equation of state of tetragonal boron subnitride B 50 N 2

Autori: Kirill A. Cherednichenko, Vladimir L. Solozhenko
Pubblicato in: Journal of Applied Physics, Numero 122/15, 2017, Pagina/e 155901, ISSN 0021-8979
Editore: American Institute of Physics
DOI: 10.1063/1.4996854

Thermal expansion of boron subnitrides

Autori: Kirill A. Cherednichenko, Lara Gigli, Vladimir L. Solozhenko
Pubblicato in: Solid State Communications, Numero 275, 2018, Pagina/e 21-24, ISSN 0038-1098
Editore: Elsevier BV
DOI: 10.1016/j.ssc.2018.03.007

Thermoelastic equation of state of boron subphosphide B12P2

Autori: V. L. Solozhenko, K. A. Cherednichenko, O. O. Kurakevych
Pubblicato in: Journal of Superhard Materials, Numero 39/1, 2017, Pagina/e 71-74, ISSN 1063-4576
Editore: Springer Verlag
DOI: 10.3103/s1063457617010099

Mechanical properties of ultra-hard nanocrystalline cubic boron nitride

Autori: Vladimir L. Solozhenko, Volodymyr Bushlya, Jinming Zhou
Pubblicato in: Journal of Applied Physics, Numero 126/7, 2019, Pagina/e 075107, ISSN 0021-8979
Editore: American Institute of Physics
DOI: 10.1063/1.5109636

The Influence of Sintering Temperature on Phase Composition and Mechanical Properties of $c$BN-Based Composites with Addition of Vanadium Compounds

Autori: K. V. Slipchenko, I. A. Petrusha, V. Z. Turkevich, D. A. Stratiichuk, V. M. Slipchenko, N. M. Bilyavina, D. V. Turkevich, V. M. Bushlya, J.-E. Stahl
Pubblicato in: METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, Numero 41/12, 2019, Pagina/e 1599-1610, ISSN 1024-1809
Editore: National'na Akademiya Nauk Ukrainy
DOI: 10.15407/mfint.41.12.1599

Obtaining superhard composites in the system Cdiam—SiB4—WC under conditions of high pressures and temperatures

Autori: D.A. Stratiichuk, V.Z. Turkevich, V.M. Bushlya
Pubblicato in: Reports of the National Academy of Sciences of Ukraine, Numero 10, 2019, Pagina/e 49-56, ISSN 1025-6415
Editore: Akademperiodyca
DOI: 10.15407/dopovidi2019.10.049

Mechanical Properties of Boron Phosphides

Autori: V. L. Solozhenko, V. Bushlya
Pubblicato in: Journal of Superhard Materials, Numero 41/2, 2019, Pagina/e 84-89, ISSN 1063-4576
Editore: Springer Verlag
DOI: 10.3103/s1063457619020023

Nanotwinning in Boron Subphosphide B12P2

Autori: B. A. Kulnitskiy, I. A. Perezhogin, V. D. Blank, V. A. Mukhanov, V. L. Solozhenko
Pubblicato in: Journal of Superhard Materials, Numero 41/2, 2019, Pagina/e 139-141, ISSN 1063-4576
Editore: Springer Verlag
DOI: 10.3103/s1063457619020102

Thermal expansion of α-boron and some boron-rich pnictides

Autori: Kirill A. Cherednichenko, Vladimir L. Solozhenko
Pubblicato in: Solid State Communications, Numero 303-304, 2019, Pagina/e 113735, ISSN 0038-1098
Editore: Elsevier BV
DOI: 10.1016/j.ssc.2019.113735

Quantitative analysis of chip segmentation in machining using an automated image processing method

Autori: Andrew Hrechuk, Volodymyr Bushlya, Rachid M’Saoubi, Jan-Eric Ståhl
Pubblicato in: Procedia CIRP, Numero 82, 2019, Pagina/e 314-319, ISSN 2212-8271
Editore: Elsevier
DOI: 10.1016/j.procir.2019.03.272

Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications

Autori: V. Bushlya, I. Petrusha, O. Gutnichenko, O. Osipov, R. M'Saoubi, V. Turkevich, J.-E. Ståhl
Pubblicato in: International Journal of Refractory Metals and Hard Materials, Numero 86, 2020, Pagina/e 105100, ISSN 0263-4368
Editore: Elsevier BV
DOI: 10.1016/j.ijrmhm.2019.105100

Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting

Autori: V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, R. M'Saoubi, J. E. Ståhl
Pubblicato in: Procedia CIRP, Numero Volume 58, 2017, Pagina/e 122-127, ISSN 2212-8271
Editore: Elsevier

The Influence of VC-Al Additive Content on Structure and Phase Composition of cBN Based Superhard Materials

Autori: Slipchenko, K., Petrusha, I., Turkevich, V., Johansson, J., Bushlya, V., & Ståhl, J. E.
Pubblicato in: Rock destructive and metal cutting tools – technique and technology of their manufacturing and application, Numero Vol.21, 2018, 2018, Pagina/e 275-284, ISSN 2223-3938
Editore: ISM

Thermobaric sintering of cubic boron nitride in the presence of unstable iron and chromium nitrides.

Autori: I.A. Petrusha, Yu.O. Melniichuk, V.M. Bushlya, N.M. Bilyavyna, O.S. Osipov, D.A. Stratiichuk, T.I. Smirnova, K.V. Slipchenko
Pubblicato in: Proceedings of the Conference “Rock Destructive and Metal Machining Tools” in Truskavets, 2016
Editore: ISM

Risultati finali

Pubblicazioni

Condividi questa pagina Condividi questa pagina sui social network

Scarica Scarica il contenuto della pagina