Commercialization of a full carbon wheel manufactured with an automated high-volume process for the automotive market

Información del proyecto

CARIM

Identificador del acuerdo de subvención: 690915

DOI

10.3030/690915

Proyecto cerrado

Fecha de la firma de la CE 18 Diciembre 2015

Fecha de inicio 1 Enero 2016

Fecha de finalización 30 Abril 2018

Financiado con arreglo a

• Horizon 2020 Framework Programme

Coste total

€ 2 429 466,00

Aportación de la UE

€ 1 930 033,88

Coordinado por

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Germany

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Websites, patent fillings, videos etc. (6)

Regularly updated dissemination material

D5.2: Dissemination material: at least 2 press releases, project presentation, poster and flyer, newsletter and synopsis of results, prepared starting from month 3 and regularly updated. M6 (onwards)

Presentation of the project at trade fairs and conferences

D5.4: Presentation of the project at least 2 trade fairs and conferences. Reported M28

Project website; continuously updated

D5.1: Project website; the public website will be functioning by month 3, and it will continuously be updated with the public results of the project, and with information directed to the different expected audiences. M3

Industrial workshops (1)

D6.5: Industrial workshops. M12, M24

Open access publications

D5.3: Publications: at least 2 Open Access, peer-reviewed publications and 2 publications in other media e.g. trade journals. Reported at the end of the project in M28

Industrial workshops (2)

D6.9: Industrial workshops. M12, M28

Demonstrators, pilots, prototypes (4)

HP-RTM mold for manufacturing of the wheel ready to be taken into operation

D3.2: Final design of HP-RTM mold for manufacturing of the wheel / manufactured mold ready to be taken into operation on HP-RTM equipment available at Fraunhofer ICT. M12

Process chain ready for production of prototypes

D3.3: Implemented manufacturing process chain for preforming and HP-RTM in industrial scale with integrated monitoring system for prototype production. M18

Preforming mould and manufacturing equipment ready to be taken into operation

D3.1: Final design of preforming mold and equipment technology for manufacturing of wheel preforms / manufactured mold ready to be taken into operation on the PreformCenter equipment at Fraunhofer ICT. M12

Manufactured Prototypes for homologation

D3.4: Prototypes for testing and validation of the wheel / Manufacturing process data. M18

Documents, reports (2)

Environmental test report for carbon wheel

D4.2 Results of environmental test report of carbon wheel prototypes. M28

Report for dynamic full life-cycle simulation

D4.3 Full life-cycle simulation report, correlated with mechanical tests. M18

Publicaciones

Peer reviewed articles (1)

Development of full carbon wheels for sport cars with high-volume technology

Autores: Francesco Rondina, Sara Taddia, Laura Mazzocchetti, Lorenzo Donati, Giangiacomo Minak, Philipp Rosenberg, Andrea Bedeschi, Enrico Dolcini
Publicado en: Composite Structures, Edición 192, 2018, Página(s) 368-378, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2018.02.083