Knock prevention and increase of reliability and efficiency of high power gaseous internal combustion engines

Informations projet

Knocky

N° de convention de subvention: 691232

DOI

10.3030/691232

Projet clôturé

Date de signature de la CE 3 Novembre 2015

Date de début 1 Decembre 2015

Date de fin 30 Novembre 2019

Financé au titre de

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coût total

€ 936 000,00

Contribution de l’UE

€ 927 000,00

Coordonné par

POLITECHNIKA CZESTOCHOWSKA
Poland

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (21)

"Mid-term Report #1 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

"Mid-term Report #6 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

Published articles

The report will present manuscripts prepared for publication in journals.

"Report on seminar #1 organization"

The report will present both agenda and seminar No. 1 proceedings prepared on the basis of works by researchers involved in the project.

"Report on webinar #2 organization"

"The report will present discusion on the webinar #2. It will contain agenda and conclusions from this meeting via internet communication."

"Report on webinar #3 organization"

"The report will present discusion on the webinar #3. It will contain agenda and conclusions from this meeting via internet communication."

Report on research works

The document will present results of the work conducted on flame visualisation. The document will be in both paper version and video format presenting flame propagation. It will also contain information on progress in works by researchers.

Report from Kick-off meeting

Report of the knock-off meeting will present discussion, strategy and conclusions towards fruitful realisation of the project workpackages.

Report on symposium organization and other actions undertaken in the WP6

The report presents course of the symposium in which final conclusions aas well as summary of the project and dissemination strategies will be inserted.

Report on combustion and knock models

Combustion in the IC engine will be modeled. Abnormal combustion so-called knock will be also modelled. The report will present results of the work on combustion models and knock models as well.

"Report on seminar #2 organization"

The report will present both agenda and seminar No. 2 proceedings prepared on the basis of works by researchers involved in the project.

Report 2 on data processing works

The report will present progress in tests as well as provide the data from engine indicating systems with the signal processing analysis.

Report 1 on data processing works

It will provide the data from engine tests prepared for signal processing analysis.

"Mid-term Report #3 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

Report 2 on final results

The document will provide information on WorkPackage 4 termination. Additionally it will contain conclusions, that will be presented in various conference proceedings.

"Mid-term Report #2 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

"Report on webinar #1 organization"

"The report will present discusion on the seminar #1 set up as webinar with aid of internet communication."

"Report on webinar #4 organization"

"The report will present discusion on the webinar #4. It will contain agenda and conclusions from this meeting via internet communication."

Report on workshop organization organization

The report will present agenda of the workshop. Additionally, the report will contain tasks presented in the workshop, the tutors and prelegents.

"Mid-term Report #4 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

"Mid-term Report #5 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

Websites, patent fillings, videos etc. (1)

Report on website construction

The website of the project will be prepared. It will contain information about project outline and progress in project realisattion. Additionally, it will contain various crucial information for project participants and project timetable.

Publications

Peer reviewed articles (14)

The combustion properties analysis of various liquid fuels based on crude oil and renewables

Auteurs: K Grab-Rogalinski, S Szwaja
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 148, 2016, Page(s) 012066, ISSN 1757-8981
Éditeur: IOP Publishing Ltd
DOI: 10.1088/1757-899X/148/1/012066

The Possibility of Use a waste Product of Biofuels Production-Glycerol as a fuel to the Compression Ignition Engine

Auteurs: Grab-Rogaliński Karol Szwaja Stanisław
Publié dans: Journal of Kones, Numéro 23 3/4 2016, 2016, Page(s) 157-164, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/12314005.1216471

LAMINAR BURNING VELOCITY PREDICTIONS OF SINGLE-FUEL MIXTURES OF C1-C7 NORMAL HYDROCARBON AND AIR

Auteurs: Agnieszka Jach, Mateusz Żbikowski, Andrzej Teodorczyk
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.4337

THE IMPORTANCE OF MIXTURE PREPARATION FOR INDUSTRIAL HEAT AND POWER GAS ENGINES

Auteurs: Mathias Romańczyk, Witold Elsner
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.4356

INVESTIGATION OF KNOCK SUPPRESSION CHARACTERISTICS IN A BOOSTED METHANE – GASOLINE BLENDED FUELLED SI ENGINE

Auteurs: Zhuyong Yang, Niranjan Miganakallu, Sandesh Rao, Jaideep Harsulkar, Jeffrey Naber, Yashodeep Lonari, Stanislaw Szwaja
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.4376

CFD SIMULATIONS AS A SUPPORT OF EXPERIMENTAL RESEARCH IN A RAPID COMPRESSION EXPANSION MACHINE FACILITY

Auteurs: Agnieszka Jach, Rafał Pyszczek, Łukasz Jan Kapusta, Andrzej Teodorczyk
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 4 2018, 2018, ISSN 2354-0133
Éditeur: Institiute of Aviation
DOI: 10.5604/01.3001.0012.4786

MODELLING OF THE OVER-EXPANDED CYCLE COMBUSTION ENGINE

Auteurs: Arkadiusz Jamrozik, Wojciech Tutak Karol Grab-Rogaliński
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.4338

COMBUSTION OF RME – DIESEL AND NExBTL – DIESEL BLENDS WITH HYDROGEN IN THE COMPRESSION IGNITION ENGINE

Auteurs: Romualdas Juknelevičius, Stanislaw Szwaja, Michal Pyrc, Michal Gruca, Saugirdas Pukalskas
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.4341

IN-CYLINDER COMBUSTION ANALYSIS OF A SI ENGINE FUELLED WITH HYDROGEN ENRICHED COMPRESSED NATURAL GAS (HCNG): ENGINE PERFORMANCE, EFFICIENCY AND EMISSIONS

Auteurs: Romualdas Juknelevičius, Roopesh Kumar Mehra, Fanhua Ma, Stanislaw Szwaja
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.4340

MULTIDIMENSIONAL SIMULATION OF COMBUSTION AND KNOCK ONSET IN GAS ENGINES

Auteurs: Reinhard Tatschl, Peter Priesching, Jürgen Schneider
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 2 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.2860

Influence of gas inlet angle on the mixing process in a Venturi mixer

Auteurs: Mathias Romańczyk
Publié dans: ITM Web of Conferences, Numéro 15, 2017, Page(s) 07005, ISSN 2271-2097
Éditeur: EDP Sciences - Web of Conferences
DOI: 10.1051/itmconf/20171507005

FLAME PROPAGATION IN GAS FEEDING PIPELINES TO THE IC ENGINE

Auteurs: Michal Gruca, Stanislaw Szwaja, Michal Pyrc
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Éditeur: Instistue of Aviation
DOI: 10.5604/01.3001.0012.4333

STUDY OF THE INFLUENCES OF BLENDING DIFFERENT PROPORTIONS OF PROPANE INTO METHANE ON COMBUSTION CHARACTERISTICS AT THE KNOCK THRESHOLD BY USING RCM

Auteurs: Farzad Shokrollahi, Miroslaw Wyszynski, Juha-Pekka Sundell
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 1 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.2489

THERMODYNAMIC ANALYSIS OF COMBUSTION EVENTS IN THE NATURAL GAS FUELLED SI ENGINE WITH VVT

Auteurs: Magdalena Szwaja, Paweł Mazuro, Stanisław Szwaja
Publié dans: Journal of KONES Powertrain and Transport, Vol. 25, No. 4 2018, 2018, ISSN 2354-0133
Éditeur: Institute of Aviation
DOI: 10.5604/01.3001.0012.4819

Conference proceedings (13)

Numerical modeling of spark ignition in internal combustion engines

Auteurs: Pyszczek R, Hahn J, Priesching Teodorczyk A
Publié dans: XXIII International Symposium on Combustion Processes - Book of Abstracts, 2017, Page(s) 25-26
Éditeur: Polish Section of the Combustion Institute

Methane Number model based on a Deep Neural Network

Auteurs: Jach, Agnieszka; Malik, Konrad; Kapusta, Łukasz Jan; Żbikowski, Mateusz; Teodorczyk, Andrzej
Publié dans: 27th International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS) - Book of abstracts, Numéro 27th, evert two years, 2019
Éditeur: Institute for the Dynamics of Explosions and Reactive Systems
DOI: 10.5281/zenodo.3611989

CFD simulations of self-ignition limit with the ECFM-3Z model compared to experimental results from a rapid compression-expansion machine for engine relevant conditions

Auteurs: Jach, Agnieszka; Pyszczek, Rafał; Kapusta, Łukasz Jan; Löfholm, Per; Leino, Juha; Sundell, Juha-Pekka; Teodorczyk, Andrzej
Publié dans: 37th International Symposium on Combustion - Book of abstracts, Numéro 37th, every two years, 2018
Éditeur: The Combustion Institute
DOI: 10.5281/zenodo.3605631

Spark discharge modeling in internal combustion engines

Auteurs: Pyszczek, Rafał; Hahn, Jooyoung; Prieshing, Peter; Teodorczyk, Andrzej
Publié dans: 37th International Symposium on Combustion - Book of abstracts, Numéro 37th, every two years, 2018
Éditeur: The Combustion Institute
DOI: 10.5281/zenodo.3605797

Spark discharge visualization in a rapid compression-expansion machine

Auteurs: Kapusta, Łukasz Jan; Jach, Agnieszka; Pyszczek, Rafał; Löfholm, Per; Leino, Juha; Sundell, Wärtsilä Finland Oy; Teodorczyk, Andrzej
Publié dans: 37th International Symposium on Combustion - Book of abstracts, Numéro 37th, every two years, 2018
Éditeur: The Combustion Institute
DOI: 10.5281/zenodo.3605625

Assessment of detailed chemical kinetic mechanisms performance in reproduction of ignition delay times of C1-C5 alkanes according to the Curve Matching method

Auteurs: Jach, Agnieszka; Rudy, Wojciech; Pękalski, Andrzej; Teodorczyk, Andrzej
Publié dans: 37th International Symposium on Combustion - Book of abstracts, Numéro 37th, every two years, 2018
Éditeur: The Combustion Institute
DOI: 10.5281/zenodo.3606816

Investigations on Air-Fuel Mixture Formation for industrial Gas Engines

Auteurs: Romanczyk, Mathias
Publié dans: KNOCKY Symposium, 2019
Éditeur: Czestochowa University of Technology
DOI: 10.5281/zenodo.3612151

Optical Research in the KNOCKY Project

Auteurs: Kapusta, Łukasz Jan
Publié dans: KNOCKY Symposium, 2019
Éditeur: Warsaw University of Technology
DOI: 10.5281/zenodo.3612153

Knock Propensity of Gaseous Fuels – Research at Wärtsilä Fuel Laboratory

Auteurs: Löfholm, Per
Publié dans: KNOCKY Symposium, 2019
Éditeur: Wartsila Finland Oy
DOI: 10.5281/zenodo.3612137

MOTORTECH Gas Engine Technology – New Challenges, New Competencies

Auteurs: Holdack, Christian
Publié dans: KNOCKY Symposium, 2019
Éditeur: Motortech GmbH
DOI: 10.5281/zenodo.3612145

Spark Ignition Modeling – Model Development and Implementation

Auteurs: Pyszczek, Rafał
Publié dans: KNOCKY Symposium, 2019
Éditeur: Warsaw University of Technology
DOI: 10.5281/zenodo.3612141

Numerical modeling of spark ignition in internal combustion engines

Auteurs: Pyszczek Rafał, Hahn Jooyoung, Priesching Peter, Teodorczyk Andrzej
Publié dans: Proceedings of the 5th International Conference Contemporary Problems of Thermal Engineering, 2018, Page(s) 955-965, ISBN 978-83-61506-46-1
Éditeur: Institute of Thermal Technology

Rate of Heat Release and Flame Speed in Premixed Charge Combustion in a Rapid Compression Machine with and without Prechamber

Auteurs: Łukasz Jan Kapusta Karol Grab-Rogaliński Per Löfholm Juha-Pekka Sundell
Publié dans: Proceedings of the 8th European Combustion Meeting, Numéro 8th, 2017
Éditeur: Adria Section of the Combustion Institute

Other (1)

Report on Combustion and Knock Models

Auteurs: Pyszczek Rafal, Kapusta Lukasz
Publié dans: Numéro Ref. Ares(2017)5878985 - 30/11/2017, 2017, Page(s) 60
Éditeur: Warsaw

Thesis and dissertations (2)

On determination of ignition delay times for the modeling of DDT

Auteurs: Jach, Agnieszka
Publié dans: 2019
Éditeur: Warsaw University of Technology
DOI: 10.5281/zenodo.3611944

Numerical Modeling of Spark Ignition in Internal Combustion Engines

Auteurs: Pyszczek, Rafał
Publié dans: 2019
Éditeur: Warsaw University of Technology
DOI: 10.5281/zenodo.3611981