Knock prevention and increase of reliability and efficiency of high power gaseous internal combustion engines

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

"Mid-term Report #1 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

"Mid-term Report #6 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

Published articles

The report will present manuscripts prepared for publication in journals.

"Report on seminar #1 organization"

The report will present both agenda and seminar No. 1 proceedings prepared on the basis of works by researchers involved in the project.

"Report on webinar #2 organization"

"The report will present discusion on the webinar #2. It will contain agenda and conclusions from this meeting via internet communication."

"Report on webinar #3 organization"

"The report will present discusion on the webinar #3. It will contain agenda and conclusions from this meeting via internet communication."

Report on research works

The document will present results of the work conducted on flame visualisation. The document will be in both paper version and video format presenting flame propagation. It will also contain information on progress in works by researchers.

Report from Kick-off meeting

Report of the knock-off meeting will present discussion, strategy and conclusions towards fruitful realisation of the project workpackages.

Report on symposium organization and other actions undertaken in the WP6

The report presents course of the symposium in which final conclusions aas well as summary of the project and dissemination strategies will be inserted.

Report on combustion and knock models

Combustion in the IC engine will be modeled. Abnormal combustion so-called knock will be also modelled. The report will present results of the work on combustion models and knock models as well.

"Report on seminar #2 organization"

The report will present both agenda and seminar No. 2 proceedings prepared on the basis of works by researchers involved in the project.

Report 2 on data processing works

The report will present progress in tests as well as provide the data from engine indicating systems with the signal processing analysis.

Report 1 on data processing works

It will provide the data from engine tests prepared for signal processing analysis.

"Mid-term Report #3 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

Report 2 on final results

The document will provide information on WorkPackage 4 termination. Additionally it will contain conclusions, that will be presented in various conference proceedings.

"Mid-term Report #2 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

"Report on webinar #1 organization"

"The report will present discusion on the seminar #1 set up as webinar with aid of internet communication."

"Report on webinar #4 organization"

"The report will present discusion on the webinar #4. It will contain agenda and conclusions from this meeting via internet communication."

Report on workshop organization organization

The report will present agenda of the workshop. Additionally, the report will contain tasks presented in the workshop, the tutors and prelegents.

"Mid-term Report #4 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

"Mid-term Report #5 on progress in project and trainings"

The report will present progress in secondments realisation and progress in works conducted by researches in all workpackages. It will contain information for further project realisation.

Report on website construction

The website of the project will be prepared. It will contain information about project outline and progress in project realisattion. Additionally, it will contain various crucial information for project participants and project timetable.

Publikacje

The combustion properties analysis of various liquid fuels based on crude oil and renewables

Autorzy: K Grab-Rogalinski, S Szwaja
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 148, 2016, Strona(/y) 012066, ISSN 1757-8981
Wydawca: IOP Publishing Ltd
DOI: 10.1088/1757-899X/148/1/012066

The Possibility of Use a waste Product of Biofuels Production-Glycerol as a fuel to the Compression Ignition Engine

Autorzy: Grab-Rogaliński Karol Szwaja Stanisław
Opublikowane w: Journal of Kones, Numer 23 3/4 2016, 2016, Strona(/y) 157-164, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/12314005.1216471

LAMINAR BURNING VELOCITY PREDICTIONS OF SINGLE-FUEL MIXTURES OF C1-C7 NORMAL HYDROCARBON AND AIR

Autorzy: Agnieszka Jach, Mateusz Żbikowski, Andrzej Teodorczyk
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.4337

THE IMPORTANCE OF MIXTURE PREPARATION FOR INDUSTRIAL HEAT AND POWER GAS ENGINES

Autorzy: Mathias Romańczyk, Witold Elsner
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.4356

INVESTIGATION OF KNOCK SUPPRESSION CHARACTERISTICS IN A BOOSTED METHANE – GASOLINE BLENDED FUELLED SI ENGINE

Autorzy: Zhuyong Yang, Niranjan Miganakallu, Sandesh Rao, Jaideep Harsulkar, Jeffrey Naber, Yashodeep Lonari, Stanislaw Szwaja
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.4376

CFD SIMULATIONS AS A SUPPORT OF EXPERIMENTAL RESEARCH IN A RAPID COMPRESSION EXPANSION MACHINE FACILITY

Autorzy: Agnieszka Jach, Rafał Pyszczek, Łukasz Jan Kapusta, Andrzej Teodorczyk
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 4 2018, 2018, ISSN 2354-0133
Wydawca: Institiute of Aviation
DOI: 10.5604/01.3001.0012.4786

MODELLING OF THE OVER-EXPANDED CYCLE COMBUSTION ENGINE

Autorzy: Arkadiusz Jamrozik, Wojciech Tutak Karol Grab-Rogaliński
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.4338

COMBUSTION OF RME – DIESEL AND NExBTL – DIESEL BLENDS WITH HYDROGEN IN THE COMPRESSION IGNITION ENGINE

Autorzy: Romualdas Juknelevičius, Stanislaw Szwaja, Michal Pyrc, Michal Gruca, Saugirdas Pukalskas
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.4341

IN-CYLINDER COMBUSTION ANALYSIS OF A SI ENGINE FUELLED WITH HYDROGEN ENRICHED COMPRESSED NATURAL GAS (HCNG): ENGINE PERFORMANCE, EFFICIENCY AND EMISSIONS

Autorzy: Romualdas Juknelevičius, Roopesh Kumar Mehra, Fanhua Ma, Stanislaw Szwaja
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.4340

MULTIDIMENSIONAL SIMULATION OF COMBUSTION AND KNOCK ONSET IN GAS ENGINES

Autorzy: Reinhard Tatschl, Peter Priesching, Jürgen Schneider
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 2 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.2860

Influence of gas inlet angle on the mixing process in a Venturi mixer

Autorzy: Mathias Romańczyk
Opublikowane w: ITM Web of Conferences, Numer 15, 2017, Strona(/y) 07005, ISSN 2271-2097
Wydawca: EDP Sciences - Web of Conferences
DOI: 10.1051/itmconf/20171507005

FLAME PROPAGATION IN GAS FEEDING PIPELINES TO THE IC ENGINE

Autorzy: Michal Gruca, Stanislaw Szwaja, Michal Pyrc
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018, 2018, ISSN 2354-0133
Wydawca: Instistue of Aviation
DOI: 10.5604/01.3001.0012.4333

STUDY OF THE INFLUENCES OF BLENDING DIFFERENT PROPORTIONS OF PROPANE INTO METHANE ON COMBUSTION CHARACTERISTICS AT THE KNOCK THRESHOLD BY USING RCM

Autorzy: Farzad Shokrollahi, Miroslaw Wyszynski, Juha-Pekka Sundell
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 1 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.2489

THERMODYNAMIC ANALYSIS OF COMBUSTION EVENTS IN THE NATURAL GAS FUELLED SI ENGINE WITH VVT

Autorzy: Magdalena Szwaja, Paweł Mazuro, Stanisław Szwaja
Opublikowane w: Journal of KONES Powertrain and Transport, Vol. 25, No. 4 2018, 2018, ISSN 2354-0133
Wydawca: Institute of Aviation
DOI: 10.5604/01.3001.0012.4819

Numerical modeling of spark ignition in internal combustion engines

Autorzy: Pyszczek R, Hahn J, Priesching Teodorczyk A
Opublikowane w: XXIII International Symposium on Combustion Processes - Book of Abstracts, 2017, Strona(/y) 25-26
Wydawca: Polish Section of the Combustion Institute

Methane Number model based on a Deep Neural Network

Autorzy: Jach, Agnieszka; Malik, Konrad; Kapusta, Łukasz Jan; Żbikowski, Mateusz; Teodorczyk, Andrzej
Opublikowane w: 27th International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS) - Book of abstracts, Numer 27th, evert two years, 2019
Wydawca: Institute for the Dynamics of Explosions and Reactive Systems
DOI: 10.5281/zenodo.3611989

CFD simulations of self-ignition limit with the ECFM-3Z model compared to experimental results from a rapid compression-expansion machine for engine relevant conditions

Autorzy: Jach, Agnieszka; Pyszczek, Rafał; Kapusta, Łukasz Jan; Löfholm, Per; Leino, Juha; Sundell, Juha-Pekka; Teodorczyk, Andrzej
Opublikowane w: 37th International Symposium on Combustion - Book of abstracts, Numer 37th, every two years, 2018
Wydawca: The Combustion Institute
DOI: 10.5281/zenodo.3605631

Spark discharge modeling in internal combustion engines

Autorzy: Pyszczek, Rafał; Hahn, Jooyoung; Prieshing, Peter; Teodorczyk, Andrzej
Opublikowane w: 37th International Symposium on Combustion - Book of abstracts, Numer 37th, every two years, 2018
Wydawca: The Combustion Institute
DOI: 10.5281/zenodo.3605797

Spark discharge visualization in a rapid compression-expansion machine

Autorzy: Kapusta, Łukasz Jan; Jach, Agnieszka; Pyszczek, Rafał; Löfholm, Per; Leino, Juha; Sundell, Wärtsilä Finland Oy; Teodorczyk, Andrzej
Opublikowane w: 37th International Symposium on Combustion - Book of abstracts, Numer 37th, every two years, 2018
Wydawca: The Combustion Institute
DOI: 10.5281/zenodo.3605625

Assessment of detailed chemical kinetic mechanisms performance in reproduction of ignition delay times of C1-C5 alkanes according to the Curve Matching method

Autorzy: Jach, Agnieszka; Rudy, Wojciech; Pękalski, Andrzej; Teodorczyk, Andrzej
Opublikowane w: 37th International Symposium on Combustion - Book of abstracts, Numer 37th, every two years, 2018
Wydawca: The Combustion Institute
DOI: 10.5281/zenodo.3606816

Investigations on Air-Fuel Mixture Formation for industrial Gas Engines

Autorzy: Romanczyk, Mathias
Opublikowane w: KNOCKY Symposium, 2019
Wydawca: Czestochowa University of Technology
DOI: 10.5281/zenodo.3612151

Optical Research in the KNOCKY Project

Autorzy: Kapusta, Łukasz Jan
Opublikowane w: KNOCKY Symposium, 2019
Wydawca: Warsaw University of Technology
DOI: 10.5281/zenodo.3612153

Knock Propensity of Gaseous Fuels – Research at Wärtsilä Fuel Laboratory

Autorzy: Löfholm, Per
Opublikowane w: KNOCKY Symposium, 2019
Wydawca: Wartsila Finland Oy
DOI: 10.5281/zenodo.3612137

MOTORTECH Gas Engine Technology – New Challenges, New Competencies

Autorzy: Holdack, Christian
Opublikowane w: KNOCKY Symposium, 2019
Wydawca: Motortech GmbH
DOI: 10.5281/zenodo.3612145

Spark Ignition Modeling – Model Development and Implementation

Autorzy: Pyszczek, Rafał
Opublikowane w: KNOCKY Symposium, 2019
Wydawca: Warsaw University of Technology
DOI: 10.5281/zenodo.3612141

Numerical modeling of spark ignition in internal combustion engines

Autorzy: Pyszczek Rafał, Hahn Jooyoung, Priesching Peter, Teodorczyk Andrzej
Opublikowane w: Proceedings of the 5th International Conference Contemporary Problems of Thermal Engineering, 2018, Strona(/y) 955-965, ISBN 978-83-61506-46-1
Wydawca: Institute of Thermal Technology

Rate of Heat Release and Flame Speed in Premixed Charge Combustion in a Rapid Compression Machine with and without Prechamber

Autorzy: Łukasz Jan Kapusta Karol Grab-Rogaliński Per Löfholm Juha-Pekka Sundell
Opublikowane w: Proceedings of the 8th European Combustion Meeting, Numer 8th, 2017
Wydawca: Adria Section of the Combustion Institute

Report on Combustion and Knock Models

Autorzy: Pyszczek Rafal, Kapusta Lukasz
Opublikowane w: Numer Ref. Ares(2017)5878985 - 30/11/2017, 2017, Strona(/y) 60
Wydawca: Warsaw

On determination of ignition delay times for the modeling of DDT

Autorzy: Jach, Agnieszka
Opublikowane w: 2019
Wydawca: Warsaw University of Technology
DOI: 10.5281/zenodo.3611944

Numerical Modeling of Spark Ignition in Internal Combustion Engines

Autorzy: Pyszczek, Rafał
Opublikowane w: 2019
Wydawca: Warsaw University of Technology
DOI: 10.5281/zenodo.3611981

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz