COMPUTER CONTROL OF A UNIVERSAL BEAM MILL.

Projektinformationen

ID Finanzhilfevereinbarung: 7210-EA-505

Startdatum 1 Juli 1983

Enddatum 30 Juni 1988

Finanziert unter

• Medium-term orientation (ECSC) "steel research in relation to the General Objectives for Steel", 1981-1985

Gesamtkosten € 0,00

EU-Beitrag Keine Daten

Koordiniert durch

ARBED
Luxembourg

Ziel

UNLIKE MILLS FOR FLAT PRODUCTS, BEAM MILLS ARE NOT GENERALLY EQUIPPED WITH ADVANCED TECHNICAL SYSTEMS FOR CONTROLLING THE ROLLING PROCESS.
IN THEIR ABSENCE, IT IS DIFFICULT TO ADJUST THE MILL PARAMETERS (ROLLING PLAN, ROLL POSITIONING, ETC.) TO THE VARIATIONS IN ROLLING CONDITIONS (E.G. TEMPERATURE, QUALITY AND DIMENSIONS OF THE ROLLED PRODUCTS). MANUAL ADJUSTMENT OF THE MILL PARAMETERS BY ROLLING MILL OPERATIVES ON THE BASIS OF PRACTICAL EXPERIENCE OFTEN LEADS TO LOSSES OF PRODUCTIVITY AND WASTED MATERIAL (REJECTS BECAUSE OF GEOMETRICAL FAULTS), THE MORE SO WHEN ROLLING CONDITIONS DIVERGE FROM THE NORMAL CONDITIONS.

THE AIM IS TO INSTALL ON A UNIVERSAL BEAM MILL A COMPUTERIZED SYSTEM TO CONTROL THE ROLLING PROCESS THAT CAN KEEP TP CLOSER DIMENSIONAL TOLERANCES AND DESIGN ROLLING PLANS THAT ARE OPTIMAL FROM THE VIEWPOINT OF PRODUCT QUALITY AND ROLLING MILL PRODUCTIVITY. BASED ON MATHEMATICAL MODELLING OF ROLLING IN A UNIVERSAL STAND, THE CONTROL SYSTEM SHOULD PROVIDE AUTOMATIC REGULATION OF THE STANDS IN THE UNIVERSAL MILL ONCE THE FINAL PHASE OF THE RESEARCH IS COMPLETED.

Programm/Programme

• ECSC-STEELRES 6C - Medium-term orientation (ECSC) "steel research in relation to the General Objectives for Steel", 1981-1985

Thema/Themen

Data not available

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

Data not available

Koordinator

ARBED

• EU-Beitrag: Keine Daten
• Adresse: BP 60 ; 4503 DIFFERDANGE ; Luxemburg
• Gesamtkosten: Keine Daten