Objetivo The objective of this project is the development of a system for real-time detection and correction of defects in strip rolling facilities. In particular, the system will be focused on defects due to refrigeration failures in the rolls and on failures due to the improper setting of set-point forces in the stands of the mill. A high-speed thermographic line-scan sensor will be installed and its linear-infrared images will be correlated with other signals of the mill. The images will then be analysed, applying pattern recognition techniques, to detect and isolate the failures and their causes generating the proper correction signals. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) D2 - Rolling - flat products Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador ACERALIA CORPORACION SIDERURGICA Aportación de la UE Sin datos Dirección 33480 AVILES (ASTURIAS) España Ver en el mapa Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo CENTRO SVILUPPO MATERIALI SPA Italia Aportación de la UE Sin datos Dirección Via di Castel Romano 100/102 00128 ROMA EUR Ver en el mapa Coste total Sin datos