Low Cost Materials Processing Technologies for Mass Production of Lightweight Vehicles

Livrables

Summary of material modelling for the project, including the Forming Limit model, Tool Life model and Tool Maker model (ICL; Month: 1; Task 2.4).

Publications

Using artificial neural networks to model aluminium based sheet forming processes and tools details

Auteurs: N Mekras
Publié dans: Journal of Physics: Conference Series, Numéro 896, 2017, Page(s) 012090, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/896/1/012090

Some recent developments in sheet metal forming for production of lightweight automotive parts

Auteurs: M Tisza, Zs Lukács, P Kovács, D Budai
Publié dans: Journal of Physics: Conference Series, Numéro 896, 2017, Page(s) 012087, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/896/1/012087

Forming limit prediction for AA7075 alloys under hot stamping conditions

Auteurs: H Gao, D J Politis, X Luan, K Ji, Q Zhang, Y Zheng, M Gharbi, L Wang
Publié dans: Journal of Physics: Conference Series, Numéro 896, 2017, Page(s) 012089, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/896/1/012089

Hot forming and quenching pilot process development for low cost and low environmental impact manufacturing.

Auteurs: Roger W. Hall, Alistair Foster, Anja Herrmann Praturlon
Publié dans: Journal of Physics: Conference Series, Numéro 896, 2017, Page(s) 012088, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/896/1/012088

Development of an interactive friction model for the prediction of lubricant breakdown behaviour during sliding wear

Auteurs: Y. Hu, L. Wang, D.J. Politis, M.A. Masen
Publié dans: Tribology International, Numéro 110, 2017, Page(s) 370-377, ISSN 0301-679X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.triboint.2016.11.005

Application and development trends in high strength steel and aluminium

Auteurs: Zs Lukacs, M Tisza
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 448, 2018, Page(s) 012031, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012031

Investigation of clinch joints made of similar and dissimilar materials

Auteurs: P Kovács, M Tisza
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 426, 2018, Page(s) 012028, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/426/1/012028

Comparative study of the application of steels and aluminium in lightweight production of automotive parts

Auteurs: Miklos Tisza, Imre Czinege
Publié dans: International Journal of Lightweight Materials and Manufacture, Numéro 1/4, 2018, Page(s) 229-238, ISSN 2588-8404
Éditeur: Elsevier
DOI: 10.1016/j.ijlmm.2018.09.001

An analytical investigation on the wrinkling of aluminium alloys during stamping using macro-scale structural tooling surfaces

Auteurs: Kailun Zheng, Junyi Lee, Denis J. Politis, Nan Li, Jianguo Lin, Trevor A. Dean
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 92/1-4, 2017, Page(s) 481-495, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-017-0121-8

Industrial based volume manufacturing of lightweight aluminium alloy panel components with high-strength and complex-shape for car body and chassis structures

Auteurs: Gerald Anyasodor, Christian Koroschetz
Publié dans: Journal of Physics: Conference Series, Numéro 896, 2017, Page(s) 012093, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/896/1/012093

Experimental Investigations of the In-Die Quenching Efficiency and Die Surface Temperature of Hot Stamping Aluminium Alloys

Auteurs: Kailun Zheng, Junyi Lee, Wenchao Xiao, Baoyu Wang, Jianguo Lin
Publié dans: Metals, Numéro 8/4, 2018, Page(s) 231, ISSN 2075-4701
Éditeur: MDPI AG
DOI: 10.3390/met8040231

Experimental investigation and modelling of hot forming B4C/AA6061 low volume fraction reinforcement composites

Auteurs: Kailun Zheng, Jianguo Lin, Gaohui Wu, Roger W. Hall, Trevor A. Dean
Publié dans: Journal of Theoretical and Applied Mechanics, 2018, Page(s) 457, ISSN 1429-2955
Éditeur: Publishing House of the Warsaw University of Technology
DOI: 10.15632/jtam-pl.56.2.457

High strength steels and aluminium alloys in lightweight body manufacturing

Auteurs: M. Tisza
Publié dans: Archives of Materials Science and Engineering, Numéro 2/88, 2017, Page(s) 68-74, ISSN 1897-2764
Éditeur: International OCSCO World Press
DOI: 10.5604/01.3001.0010.8041

Finite Element Modelling of Clinched Joints

Auteurs: Szabolcs Jónás, Miklós Tisza
Publié dans: Advanced Technologies & Materials, Numéro 43/1, 2018, Page(s) 1-6, ISSN 2620-0325
Éditeur: Department for Production Engineering, Faculty of Technical Sciences, Novi Sad
DOI: 10.24867/atm-2018-1-001

A review on forming techniques for manufacturing lightweight complex—shaped aluminium panel components

Auteurs: Kailun Zheng, Denis J. Politis, Liliang Wang, Jianguo Lin
Publié dans: International Journal of Lightweight Materials and Manufacture, Numéro 1/2, 2018, Page(s) 55-80, ISSN 2588-8404
Éditeur: Elsevier
DOI: 10.1016/j.ijlmm.2018.03.006

Multi-objective finite element simulations of a sheet metal-forming process via a cloud-based platform

Auteurs: Ailing Wang, Omer El Fakir, Jun Liu, Qunli Zhang, Yang Zheng, Liliang Wang
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 100/9-12, 2019, Page(s) 2753-2765, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-018-2877-x

EXPERIMENTAL STUDY ON DP600 CLINCHED JOINTS

Auteurs: Szabolcs Jónás, Miklós Tisza
Publié dans: Metallurgy and Foundry Engineering, Numéro 44/1, 2018, Page(s) 31, ISSN 1230-2325
Éditeur: AGH University of Science and Technology
DOI: 10.7494/mafe.2018.44.1.31

Springback analysis of AA5754 after hot stamping: experiments and FE modelling

Auteurs: Ailing Wang, Kai Zhong, Omer El Fakir, Jun Liu, Chaoyang Sun, Li-Liang Wang, Jianguo Lin, Trevor A. Dean
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 89/5-8, 2017, Page(s) 1339-1352, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-016-9166-3

High strength aluminum alloys in car manufacturing

Auteurs: M Tisza, Zs Lukács
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 418, 2018, Page(s) 012033, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/418/1/012033

Numerical modelling of forming high strength aluminium

Auteurs: V Gál, Zs Lukács
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 448, 2018, Page(s) 012025, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012025

Characterisation of the contact pressure dependent interfacial heat transfer coefficient for a hot stamping process following a data driven approach

Auteurs: Xiaochuan Liu, Yang Zheng, Omer El Fakir, Rajab Said, LiLiang Wang
Publié dans: MATEC Web of Conferences, Numéro 190, 2018, Page(s) 08005, ISSN 2261-236X
Éditeur: EDP Sciences
DOI: 10.1051/matecconf/201819008005

Investigation of the lubrication performance using WC: C coated tool surfaces for hot stamping AA6082

Auteurs: Kailun Zheng, Yangchun Dong, Hanshan Dong, Jonathan Fernandez, Trevor A Dean
Publié dans: Procedia Engineering, Numéro 207, 2017, Page(s) 711-716, ISSN 1877-7058
Éditeur: Elsevier
DOI: 10.1016/j.proeng.2017.10.1046

Numerical study on nozzle-field cooling of heated aluminium blanks for hot-stamping

Auteurs: Yankang Tian, Yihui Zhao, Daniel Melville, Yi Qin
Publié dans: Procedia Manufacturing, Numéro 15, 2018, Page(s) 1134-1141, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2018.07.377

Formability Investigations of Advanced High Strength Steels

Auteurs: Y Mehdi, M Tisza
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 448, 2018, Page(s) 012022, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012022

Comparative study on theoretical and experimental evaluation of forming limit diagrams

Auteurs: G Béres, Z Weltsch, M Tisza
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 426, 2018, Page(s) 012005, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/426/1/012005

Hot stamping of AA6082 tailor welded blanks for automotive applications

Auteurs: Jun Liu, Ailing Wang, Yang Zheng, Xiaochuan Liu, Joao Gandra, Kathryn Beamish, Aura Petre, Li-Liang Wang
Publié dans: Procedia Engineering, Numéro 207, 2017, Page(s) 729-734, ISSN 1877-7058
Éditeur: Elsevier
DOI: 10.1016/j.proeng.2017.10.820

Numerical modelling of hot forming of high strength Al-alloys

Auteurs: Zs Lukács, M Tisza
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 426, 2018, Page(s) 012032, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/426/1/012032

Knowledge Based Cloud FE simulation - data-driven material characterization guidelines for the hot stamping of aluminium alloys

Auteurs: Ailing Wang, Yang Zheng, Jun Liu, Omer El Fakir, Marc Masen, Liliang Wang
Publié dans: Journal of Physics: Conference Series, Numéro 734, 2016, Page(s) 032042, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/734/3/032042

Materials and simulation modelling of a crash-beam performance – a comparison study showing the potential for weight saving using warm-formed ultra-high strength aluminium alloys

Auteurs: J Schlosser, R Schneider, W Rimkus, R Kelsch, F. Gerstner, D K Harrison, R J Grant
Publié dans: Journal of Physics: Conference Series, Numéro 896, 2017, Page(s) 012091, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/896/1/012091

Investigation of the formability of aluminium alloys at elevated temperatures

Auteurs: M Tisza, D Budai, P Z Kovács, Zs Lukács
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 159, 2016, Page(s) 012012, ISSN 1757-8981
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/159/1/012012

Experimental and numerical study of dissimilar sheet metal clinching

Auteurs: Szabolcs Jónás, Miklós Tisza, Dávid Felhős, Péter Zoltán Kovács
Publié dans: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019, Page(s) 050021
Éditeur: AIP Publishing
DOI: 10.1063/1.5112585

Prediction of stress- and strain-based forming limits of automotive thin sheets by numerical, theoretical and experimental methods

Auteurs: Gábor Béres, Zoltán Weltsch, Zsolt Lukács, Miklós Tisza
Publié dans: AIP Conference Proceedings volume 1960, 2018, Page(s) 160002
Éditeur: AIP
DOI: 10.1063/1.5035028

Study on the wrinkling behavior of cylindrical deep-drawn cups

Auteurs: Gábor Béres, Zsolt Lukács, Miklós Tisza
Publié dans: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019, Page(s) 170003
Éditeur: AIP Publishing
DOI: 10.1063/1.5112719

Investigation of Low Cost Manufacturing of Automotive Parts Made of Aluminium Alloy Sheets

Auteurs: Miklós Tisza, Zsolt Lukács, Péter Zoltán Kovács, Dávid Budai
Publié dans: The publications of the MultiScience - XXXI. MicroCAD International Scientific Conference, 2017, ISBN 9789-633581322
Éditeur: University of Miskolc
DOI: 10.26649/musci.2017.078

Investigation of the formability of metallic alloys in hot forming conditions

Auteurs: Tisza, M., Lukács, Zs., Kovács, P. Z., Budai, D
Publié dans: ICIT&APT Intl. Conf. on Industrial Tools and Advanced Processing Technologies, 2017
Éditeur: TECOS – Slovenian Tool and Die Development Center

Livrables

Publications

Partager cette page

Télécharger