Cost-Effective Recycling of CDW in High Added Value Energy Efficient Prefabricated Concrete Components for Massive Retrofitting of our Built Environment

Información del proyecto

VEEP

Identificador del acuerdo de subvención: 723582

DOI

10.3030/723582

Proyecto cerrado

Fecha de la firma de la CE 1 Julio 2016

Fecha de inicio 1 Octubre 2016

Fecha de finalización 31 Marzo 2021

Financiado con arreglo a

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Coste total

€ 4 929 753,75

Aportación de la UE

€ 4 929 753,75

Coordinado por

RINA CONSULTING SPA
Italy

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (10)

Report on the demonstration of advanced manufacturing processes for new sustainable energy efficient precast concrete elements

Report describing and illustrating the demonstration of advanced manufacturing processes for new sustainable energy efficient precast concrete elements. Quality control characteristics will be included

Report on the demonstration of cost-effective sustainable aerogels based on water-glass precursors from silica-rich C&DW recycled materials

Report describing and illustrating the demonstration of cost-effective sustainable aerogels based on water-glass precursors from silica-rich C&DW recycled materials. Quality control characteristics will be included.

Report on the contribution to the standardization system

Report on the installation and operational phase of PCEs under real climatic conditions

Report describing and illustrating the Installation and operational phase of PCEs under real climatic conditions. Analysis of energy efficiency, acoustic performance and durability will be also included.

Final communication and dissemination report

The report will also include: i) Short videos illustrating the VEEP technologies, ii) the Project technical e-publication, and iii) A collection of scientific publications submitted throughout the project

Interim communication and dissemination report

Short report on recommendations highlighting the most remarkable environmental and economic benefits from the VEEP solutions

Report on the demonstration of new advanced recycling technologies for EoL concrete waste, waste building glass and insulating mineral wool waste

Report describing and illustrating the demonstration of new advanced recycling technologies for EoL concrete waste, waste building glass and insulating mineral wool waste. Quality control characteristics will be included.

Conclusions of 2 workshops with relevant stakeholders

Report on the End-of-Life Phase of the novel VEEP PCEs, mainly focused on reuse and recyclability for the new solutions

Report describing and illustrating the End-of-Life Phase of the novel VEEP PCEs, mainly focused on reuse and recyclability for the new solutions

Other (1)

Communication toolkit

Websites, patent fillings, videos etc. (1)

Project website

Publicaciones

Other (6)

New uses for demolition waste

Autores: Blazon Publishing; Paraboschi Anna
Publicado en: EU Research Magazine, Edición 1, 2021
Editor: Blazon Publishing
DOI: 10.5281/zenodo.4876776

VEEP e-publication - final release

Autores: Paraboschi Anna; Di Maio Francesco; Gebremariam Abraham; Moreno Jaime; Eranio Giorgia; Ruiz Francisco; Nucci Marco
Publicado en: Edición 1, 2021
Editor: Veep Consortium
DOI: 10.5281/zenodo.4836494

Using a higher fraction of inert construction and demolition waste in precast elements made economically and environmentally sound – The VEEP project

Autores: Alessio Rimoldi
Publicado en: CPI Worldwide(Concrete Plant International), Edición 5, 2017, Página(s) 2-3
Editor: AD Media GbbH
DOI: 10.5281/zenodo.2383123

VEEP e-publication - first release

Autores: Anna Paraboschi, Michelle Giordano
Publicado en: 2019
Editor: VEEP Consortium
DOI: 10.5281/zenodo.2613420

Proyecto VEEP: economía circular e innovación en prefabricados de hormigón

Autores: Sonia Fernandez
Publicado en: AENOR Magazine, 2017
Editor: AENOR
DOI: 10.5281/zenodo.2382805

Sustainable building sector development

Autores: Anna Paraboschi, Arianna Amati, Ming ming HU, Valentina Prado
Publicado en: Recycling magazine, Edición Summer 2017, 2017, Página(s) 22-23
Editor: DETAIL Business Information GmbH
DOI: 10.5281/zenodo.2382973

Peer reviewed articles (12)

Co-benefits of urban concrete recycling on the mitigation of greenhouse gas emissions and land use change: A case in Chongqing metropolis, China

Autores: Chunbo Zhang, Mingming Hu, Liang Dong, Pengcheng Xiang, Qian Zhang, Jiangbo Wu, Bo Li, Shiying Shi
Publicado en: Journal of Cleaner Production, Edición 201, 2018, Página(s) 481-498, ISSN 0959-6526
Editor: Elsevier BV
DOI: 10.1016/j.jclepro.2018.07.238

Eco-efficiency assessment of technological innovations in high-grade concrete recycling

Autores: Chunbo Zhang, Mingming Hu, Liang Dong, Abraham Gebremariam, Brenda Miranda-Xicotencatl, Francesco Di Maio, Arnold Tukker
Publicado en: Resources, Conservation and Recycling, Edición 149, 2019, Página(s) 649-663, ISSN 0921-3449
Editor: Elsevier BV
DOI: 10.1016/j.resconrec.2019.06.023

Comprehensive study on the most sustainable concrete design made of recycled concrete, glass and mineral wool from C&D wastes

Autores: Abraham T. Gebremariam, Ali Vahidi, Francesco Di Maio, J. Moreno-Juez, I. Vegas-Ramiro, Artur Łagosz, Radosław Mróz, Peter Rem
Publicado en: Construction and Building Materials, Edición 273, 2021, Página(s) 121697, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/j.conbuildmat.2020.121697

Innovative technologies for recycling End-of-Life concrete waste in the built environment

Autores: Abraham T. Gebremariam, Francesco Di Maio, Ali Vahidi, Peter Rem
Publicado en: Resources, Conservation and Recycling, Edición 163, 2020, Página(s) 104911, ISSN 0921-3449
Editor: Elsevier BV
DOI: 10.1016/j.resconrec.2020.104911

Laboratory-scale study and semi-industrial validation of viability of inorganic CDW fine fractions as SCMs in blended cements

Autores: J. Moreno-Juez, Iñigo J. Vegas, M. Frías Rojas, R. Vigil de la Villa, E. Guede-Vázquez
Publicado en: Construction and Building Materials, Edición 271, 2021, Página(s) 121823, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/j.conbuildmat.2020.121823

Recycling potential in building energy renovation: A prospective study of the Dutch residential building stock up to 2050

Autores: Chunbo Zhang, Mingming Hu, Benjamin Sprecher, Xining Yang, Xiaoyang Zhong, Chen Li, Arnold Tukker
Publicado en: Journal of Cleaner Production, Edición 301, 2021, Página(s) 126835, ISSN 0959-6526
Editor: Elsevier BV
DOI: 10.1016/j.jclepro.2021.126835

Energy-carbon-investment payback analysis of prefabricated envelope-cladding system for building energy renovation: Cases in Spain, the Netherlands, and Sweden

Autores: Chunbo Zhang, Mingming Hu, Benjamin Laclau, Thomas Garnesson, Xining Yang, Arnold Tukker
Publicado en: Renewable and Sustainable Energy Reviews, Edición 145, 2021, Página(s) 111077, ISSN 1364-0321
Editor: Elsevier BV
DOI: 10.1016/j.rser.2021.111077

Environmental life cycle costing at the early stage for supporting cost optimization of precast concrete panel for energy renovation of existing buildings

Autores: Chunbo Zhang, Mingming Hu, Benjamin Laclau, Thomas Garnesson, Xining Yang, Chen Li, Arnold Tukker
Publicado en: Journal of Building Engineering, Edición 35, 2021, Página(s) 102002, ISSN 2352-7102
Editor: Elsevier
DOI: 10.1016/j.jobe.2020.102002

Upgrading construction and demolition waste management from downcycling to recycling in the Netherlands

Autores: Chunbo Zhang, Mingming Hu, Xining Yang, Brenda Miranda-Xicotencatl, Benjamin Sprecher, Francesco Di Maio, Xiaoyang Zhong, Arnold Tukker
Publicado en: Journal of Cleaner Production, Edición 266, 2020, Página(s) 121718, ISSN 0959-6526
Editor: Elsevier BV
DOI: 10.1016/j.jclepro.2020.121718

Treatment of end-of-life concrete in an innovative heating-air classification system for circular cement-based products

Autores: J. Moreno-Juez; V. García-Cortés; Abraham T. Gebremariam; Iñigo J. Vegas; F. Di Maio
Publicado en: Journal of Cleaner Production, 263, Edición 1, 2020, ISSN 0959-6526
Editor: Elsevier BV
DOI: 10.5281/zenodo.3901210

Life cycle greenhouse gas emission and cost analysis of prefabricated concrete building façade elements

Autores: Chunbo Zhang, Mingming Hu, Xining Yang, Arianna Amati, Arnold Tukker
Publicado en: Journal of Industrial Ecology, Edición 24/5, 2020, Página(s) 1016-1030, ISSN 1088-1980
Editor: MIT Press
DOI: 10.1111/jiec.12991

Life cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study

Autores: Yue Yao, Mingming Hu, Francesco Di Maio, Stefano Cucurachi
Publicado en: Journal of Industrial Ecology, Edición 24/1, 2020, Página(s) 116-127, ISSN 1088-1980
Editor: MIT Press
DOI: 10.1111/jiec.12930

Conference proceedings (2)

Novel Circular economy business model of hihg added value products for energy efficiency:C&DW to aerogels

Autores: Francisco Ruiz-Gonzalez, D. Nardagi, K.Philippe, E.Goiti, M.Ocejo, I. Vegas
Publicado en: HISER International conference - Advances in Recycling and Management of Construction and Demolition waste, 2017, Página(s) 139-142, ISBN 978-94-6186-826-8
Editor: TU Delft Library
DOI: 10.5281/zenodo.2382605

Closing the loop of EOL concrete

Autores: Francesco DI Maio, Somayeh Lotfi, Peter Rem, Abraham Teklay, Mingming Hu, Eric van Roekel, Hans van der Stelt
Publicado en: HISER International Conference - Advances in recycling and management of construction and demolition waste, 2017
Editor: TU Delft
DOI: 10.5281/zenodo.2382193

Derechos de propiedad intelectual

Patent (1)

Method and system to convert demolished concrete into a readily recyclable product

Número de solicitud/publicación: 20 21751
Fecha: 2018-10-03
Solicitante(s): TECHNISCHE UNIVERSITEIT DELFT