Resultado final Other (4) DREAM school (M30) Training event to be organized in Italy (Target 40 attendants: students, technicians, researchers). The School will be focused on practical application of additive manufacturing at industrial levels. Industrial partners of the project will be involved. Communication Kit – Final release The communication kit will include: Project Logo, Project Presentation in one sheet, Project Leaflet, Project Partner Presentations and Project gadgets. Communication Kit – Second release The communication kit will include: Project Logo, Project Presentation in one sheet, Project Leaflet, Project Partner Presentations and Project gadgets. Communication Kit - First release The communication kit will include: Project Logo, Project Presentation in one sheet, Project Leaflet, Project Partner Presentations and Project Gadgets. Documents, reports (9) Training plan Report on the different training approaches of the project: Schools, Staff Exchange, Cross-Fertilizations, Meetings, Lessons learnt. PEDR - 2nd release dissemination of results. Dissemination key elements: i) the objectives of the dissemination (mission, vision), ii) the subjects of dissemination (what will be disseminated), iii) the target audience (to whom it will be disseminated), iv) the dissemination methods (how it will be disseminated), v) the distribution of responsibilities for dissemination (who will perform the dissemination) and rules for planning and performing dissemination activities. Exploitation key elements: i) Impact of the proposed solutions on industry ii) Commercial uptake iii) IPR foreground and background iv) exploitation plans of each partner and the consortium as a whole Final Workshop The final Workshop will be organized in Italy with the title: “Excellence in laser-based additive industrial manufacturing; from the lab to real industrial applications”. Project presentation (Initial) Presentation of project main objectives and contents to address general audience Project graphic identity (LOGO), leaflet and poster High resolution project logo with a reference to metal powders and additive manufacturing. Two page leaflets. Poster alighed with EC periodic conferences (i.e. Industrial Technology). Project Handbook The Handbook provides the Partners with a concise reference to the project management structure, tasks, responsibilities and procedures at all levels of project execution. Additionally, this document comprises documentation and communication standards in order to enable quick and efficient communication within the project consortium. KPI Report The report will verify the achievement of Project KPI: KPI1: at least 15% weight reduction of parts optimized in topology and for AM KPI2: reduction of more than 10% of material cost KPI3: increase over 15% of productivity achieved for PBF process KPI3: increase over 5% of production speed of laser PBF systems KPI5: increase above 20% of fatigue strength of metal parts produced with laser PBF (up to +120%) PEDR - 1st release dissemination of results. Dissemination key elements: i) the objectives of the dissemination (mission, vision), ii) the subjects of dissemination (what will be disseminated), iii) the target audience (to whom it will be disseminated), iv) the dissemination methods (how it will be disseminated), v) the distribution of responsibilities for dissemination (who will perform the dissemination) and rules for planning and performing dissemination activities. Exploitation key elements: i) Impact of the proposed solutions on industry ii) Commercial uptake iii) IPR foreground and background iv) exploitation plans of each partner and the consortium as a whole Goal and Scope LCA and end of life scenarios General and public introduction to the aim of LCA and end of life scenarios. A process/product preliminary environmental evaluation will be done. Demonstrators, pilots, prototypes (1) Prototypal components (femoral stem, Engine subframe) Femoral stem and engine subframe, optimized in geometry, material and construction Websites, patent fillings, videos etc. (1) Project Website The website will have a .EU domaim. The website will be organized in a Public and Private Area. The public area will have the following sections: introduction, main objectives, description of work, events, networking, downloads, Web 2.0 Social Media (Facebook, Linkedin and Twitter). Publicaciones Peer reviewed articles (8) Abstracts from XIV AIMAT National Congress, XI National Conference on Materials Science and Technology, July 2017, Ischia, Italy Autores: Sciancalepore C., Gatto A., Defanti S., Denti L., Bassoli E., Ferrari A.M., Barucca G., Mengucci P., Bondioli F. Publicado en: Journal of Applied Biomaterials & Functional Materials, Issue 15/4, 2017, Page(s) 0-0, ISSN 2280-8000 Editor: Wichtig Editore s.r.l. DOI: 10.5301/jabfm.5000369 Environmental sustainability of orthopedic devices produced with powder bed fusion Autores: Grazia Maria Cappucci, Martina Pini, Paolo Neri, Marta Marassi, Elena Bassoli, Anna Maria Ferrari Publicado en: Journal of Industrial Ecology, Issue 17.12.2019, 2019, ISSN 1088-1980 Editor: MIT Press DOI: 10.1111/jiec.12968 Additively manufactured femoral stem topology optimization: case study Autores: Sorin Munteanu, Daniel Munteanu, Bogdan Gheorghiu, Tibor Bedo, Camelia Gabor, Patrizio Cremascoli, Fabio Alemani, Mihai Alin Pop Publicado en: Materials Today: Proceedings, Issue 19, 2019, Page(s) 1019-1025, ISSN 2214-7853 Editor: Elsevier DOI: 10.1016/j.matpr.2019.08.016 Microstructure, phase transformations and properties’ evaluation of Al-Si-Ni metastable alloys Autores: Alexandra Nitoi, Tibor Bedo, Bela Varga, Mihai Alin Pop, Daniel Munteanu Publicado en: Materials Today: Proceedings, Issue 19, 2019, Page(s) 1091-1098, ISSN 2214-7853 Editor: Elsevier DOI: 10.1016/j.matpr.2019.08.025 Weight reduction by topology optimization of an engine subframe mount, designed for additive manufacturing production Autores: Andrea Merulla, Andrea Gatto, Elena Bassoli, Sorin Ion Munteanu, Bogdan Gheorghiu, Mihai Alin Pop, Tibor Bedo, Daniel Munteanu Publicado en: Materials Today: Proceedings, Issue 19, 2019, Page(s) 1014-1018, ISSN 2214-7853 Editor: Elsevier DOI: 10.1016/j.matpr.2019.08.015 Ti–Zr–Si–Nb Nanocrystalline Alloys and Metallic Glasses: Assessment on the Structure, Thermal Stability, Corrosion and Mechanical Properties Autores: Camelia Gabor, Daniel Cristea, Ioana-Laura Velicu, Tibor Bedo, Andrea Gatto, Elena Bassoli, Bela Varga, Mihai Alin Pop, Victor Geanta, Radu Stefanoiu, Mirela Maria Codescu, Eugen Manta, Delia Patroi, Monica Florescu, Sorin Ion Munteanu, Ioana Ghiuta, Nicoleta Lupu, Daniel Munteanu Publicado en: Materials, Issue 12/9, 2019, Page(s) 1551, ISSN 1996-1944 Editor: MDPI Open Access Publishing DOI: 10.3390/ma12091551 Cross-Contamination Quantification in Powders for Additive Manufacturing: A Study on Ti-6Al-4V and Maraging Steel Autores: Eleonora Santecchia, Paolo Mengucci, Andrea Gatto, Elena Bassoli, Silvio Defanti, Gianni Barucca Publicado en: Materials, Issue 12/15, 2019, Page(s) 2342, ISSN 1996-1944 Editor: MDPI Open Access Publishing DOI: 10.3390/ma12152342 Metastable Al–Si–Ni Alloys for Additive Manufacturing: Structural Stability and Energy Release during Heating Autores: Tibor Bedo, Bela Varga, Daniel Cristea, Alexandra Nitoi, Andrea Gatto, Elena Bassoli, Georgiana Bulai, Ioana-Laura Velicu, Ioana Ghiuta, Sorin Munteanu, Mihai Alin Pop, Camelia Gabor, Mihaela Cosnita, Luminita Parv, Daniel Munteanu Publicado en: Metals, Issue 9/5, 2019, Page(s) 483, ISSN 2075-4701 Editor: MDPI DOI: 10.3390/met9050483 Conference proceedings (3) Enhancing The Quality Of Metal Powder Feedstock For Laser PBF Through Cross-contamination Removal Autores: E. Santecchia, P. Mengucci, A. Gatto, E. Bassoli, L. Denti, B. Gheorghiu, G. Barucca Publicado en: Euro PM2019 Proceedings, Issue 16.10.2019, 2019 Editor: EPMA Development of a Reliable Method for Contamination Detection in Raw Metal Powders for Additive Manufacturing Autores: E. Santecchia, P. Mengucci, A. Gatto, E. Bassoli, L. Denti, F. Bondioli, G. Barucca Publicado en: EuroPM18 Proceedings, Issue 14.10.2018, 2018 Editor: EPMA Life Cycle Thinking in decision-making for sustainability: from public policies to private businesses Evaluation of environmental sustainability in additive manufacturing processes for orthopaedic devic Autores: G.M.Cappucci, M.Pini, P.Neri, M.Marassi , Elena Bassoli and A.M.Ferrari Publicado en: Proceedings of the 12th Italian LCA Network Conference, Messina, 11-12th June 2018, Issue 11.06.2018, 2018 Editor: Italian NaAgency for New Technologies, Energy and Sustainable Economic Development (ENEA) Buscando datos de OpenAIRE... Se ha producido un error en la búsqueda de datos de OpenAIRE No hay resultados disponibles
