Innovative pre-fabricated components including different waste construction materials reducing building energy and minimising environmental impacts

Resultado final

First Dissemination Plan, Clustering engagements & Production of Project Website, brochure and leaflet

Development of the first Training, Education and Dissemination Plan, including networking with platforms and associations, as well as clustering activities. Creation of the project website. Production of the leaflet and brochure.

Report on Training, Education and Networking activities

Final report on Training, Education, Dissemination and Networking activities.

European standards and regulations related to production of secondary raw materials-CDW

Identification of the existing European and national standards in each partner country, codes and guidelines related to collection and processing of secondary raw materials.

Final Exploitation Plan, Business Model & Final Risk Management Plan

Final version of the Exploitation Plan, including value proposition. Final version of the Risk Plan.

Publicaciones

Assessment of thermal performance and surface moisture risk for a rear-ventilated cladding system for façade renovation

Autores: Beñat Arregi, Roberto Garay, Antonio Garrido-Marijuan
Publicado en: IOP Conference Series: Earth and Environmental Science, Edición 410, 2020, Página(s) 012102, ISSN 1755-1315
Editor: IOP Publishing Ltd
DOI: 10.1088/1755-1315/410/1/012102

Reaction to fire properties of wood waste-based geopolymers panels

Autores: Knez, Nataša; Knez, Friderik; Ducman, Vilma; Tamburini, Sergio; Natali, Marco; Bernardi, Adriana
Publicado en: Proceedings pro124 : IV International Conference on Progress of Recycling in the Built Environment, Edición 1, 2018, Página(s) 488-495
Editor: RILEM Publications SARL
DOI: 10.5281/zenodo.3268462

Durability assessment of geopolymer façade panels based on CDW

Autores: Ducman, Vilma; Frankovič, Ana; Kramar, Sabina; Tamburini, Sergio; Natali, Marco; Bernardi, Adriana
Publicado en: Proceedings pro124 : IV International Conference on Progress of Recycling in the Built Environment, Edición 1, 2018, Página(s) 307-314
Editor: RILEM Publications SARL
DOI: 10.5281/zenodo.3268425

A novel experimental setup for the stress test of geopolymer-based hydronic radiant panels using infrared thermography

Autores: G.Ferrarini, P. Bison, A. Bortolin, G.Cadelano, M. Natali, M.Panizza, S. Tamburini
Publicado en: Qirt Asia Conference Proceedings, 2019
Editor: Qirt
DOI: 10.5281/zenodo.3557714

The InnoWEE Project: from waste to energy efficiency

Autores: A. Bernardi; S. Tamburini; C. Failla; S. Signorini; F. Sonzogni
Publicado en: ITALIAN CONCRETE DAYS, 2018
Editor: CTE
DOI: 10.5281/zenodo.3570999

Life Cycle Assessment of Prefabricated Geopolymeric Façade Cladding Panels Made from Large Fractions of Recycled Construction and Demolition Waste

Autores: Davor Kvočka, Anja Lešek, Friderik Knez, Vilma Ducman, Matteo Panizza, Constantinos Tsoutis, Adriana Bernardi
Publicado en: Materials, Edición 13/18, 2020, Página(s) 3931, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma13183931

Up-scaling and performance assessment of façade panels produced from construction and demolition waste using alkali activation technology

Autores: Ana Frankovič, Vilma Ducman, Sabina Dolenec, Matteo Panizza, Sergio Tamburini, Marco Natali, Maria Pappa, Constantinos Tsoutis, Adriana Bernardi
Publicado en: Construction and Building Materials, Edición 262, 2020, Página(s) 120475, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/j.conbuildmat.2020.120475

Innovative pre-fabricated components including different waste construction materials reducing building energy and minimising environmental impacts (InnoWEE)

Autores: Loredana Fodor, Vilma Ducman, Giovanni Ferrarini, Sergio Tamburini, Constantinos Tsoutis, Francesca Becherini, Antonio Garrido-Marijuán, Giulia Mezzasalma, Leonardo Rossi, Emil Lezak, Adriana Bernardi
Publicado en: E3S Web of Conferences, Edición 111, 2019, Página(s) 03076, ISSN 2267-1242
Editor: EDP Sciences
DOI: 10.1051/e3sconf/201911103076

Assessment of geopolymers with Construction and Demolition Waste (CDW) aggregates as a building material

Autores: Matteo Panizza, Marco Natali, Enrico Garbin, Sergio Tamburini, Michele Secco
Publicado en: Construction and Building Materials, Edición 181, 2018, Página(s) 119-133, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/j.conbuildmat.2018.06.018

Optimization and mechanical-physical characterization of geopolymers with Construction and Demolition Waste (CDW) aggregates for construction products

Autores: Matteo Panizza, Marco Natali, Enrico Garbin, Vilma Ducman, Sergio Tamburini
Publicado en: Construction and Building Materials, Edición 264, 2020, Página(s) 120158, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/j.conbuildmat.2020.120158

Vrednotenje inovativnih fasadnih panelov z zaključnim slojem iz alkalijsko aktiviranih industrijskih in gradbenih odpadkov / Evaluation of innovative façade panels with a finishing layer of alkali-activated industrial and construction waste

Autores: Frankovič, Ana
Publicado en: 2020
Editor: Univerza v Ljubljani
DOI: 10.5281/zenodo.4106501

Projekt InnoWEE - Razvoj Gradbenih Proizvodov s Tehnologijo Alkalijskie Aktivacije / Project InnoWEE - InnoWEE project. Development of Building Products with Alkaline Activation Technology

Autores: ZAG ( Slovenian National Building and Civil Engineering Institute)
Publicado en: National construction and civil engineering journal, Slovenia, 2018, ISSN 0000-0000
Editor: http://www.gradbenik.net/
DOI: 10.5281/zenodo.3686608

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página

Descargar