Objetivo
SARAH is concerned with establishing novel holistic, simulation-based approaches to the analysis of aircraft ditching. It is build up from a consortium of experts from OEM industries, experienced suppliers of simulation technologies, established research institutions and representatives of the certification authorities. Results of SARAH are expected to support a performance-based regulation and certification for next generation aircraft and helicopter and to enhance the safe air transport as well as to foster the trustworthiness of aviation services.
Aircrafts and helicopters often travel above water and thus have to prove a safe landing under emergency conditions. The specific challenge is to minimize the risk of injury to passengers and to enable safe evacuation. Accordingly, the motion of the aircraft/helicopter along with the forces acting on the structure are studied for controlled water impact during the design phase of an aircraft.
Ditching has close links with crash simulation, but also distinctive features. Examples refer to hydrodynamic slamming loads on airborne vehicles and complex hydromechanics (partially at very large forward speeds) as well as the interaction of multi-phase fluid dynamics (involving air, water, and vapor phases) and structure mechanics.
Design for ditching involves more than the analysis of loads and subsequent strengthening of the structure. It often requires adjustment campaigns for the handling of the vehicle during approach and the identification of favorable approach/flight-path conditions in line with the pilots flying capabilities to minimize the remaining kinetic energy of the vehicle to be transferred into the water.
In conclusion, a pressing need for more advanced studies to support the development of next-generation, generalized simulation-based ditching-analysis practices is acknowledged by all stakeholders. The public interest in safety makes this proposal an ideal candidate for a European research proposal.
Ámbito científico
- ciencias naturalesciencias físicasmecánica clásicamecánica de fluidosdinámica de fluidos
- ingeniería y tecnologíaingeniería mecánicaingeniería de vehículosingeniería aeroespacialaeronavegiroavión
- ciencias naturalesmatemáticasmatemáticas purasgeometría
- ingeniería y tecnologíaingeniería mecánicaingeniería de vehículosingeniería aeroespacialingeniería aeronáutica
- ciencias naturalesinformática y ciencias de la informaciónsoftwaresoftware de aplicaciónsoftware de simulación
Programa(s)
Convocatoria de propuestas
Consulte otros proyectos de esta convocatoriaConvocatoria de subcontratación
H2020-MG-2016-SingleStage-INEA
Régimen de financiación
RIA - Research and Innovation action
Coordinador
21129 Hamburg
Alemania
Ver en el mapa
Participantes (11)
3440 Budingen
Ver en el mapa
Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.
44300 Nantes
Ver en el mapa
Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.
00185 Roma
Ver en el mapa
21073 Hamburg
Ver en el mapa
28022 Madrid
Ver en el mapa
21129 Hamburg
Ver en el mapa
38106 Braunschweig
Ver en el mapa
44321 Nantes Cedex 3
Ver en el mapa
92400 Nantes
Ver en el mapa
13700 Marignane
Ver en el mapa
75008 Paris
Ver en el mapa