Objectif
The aim of the research project was to establish technical means of reducing
- the number of accidents and physical injuries
- the physical stress
- the noise emission level.
in the feeder area and during the manual feeding-in of round steel bars.
This can only be achieved by stopping the manual feeding-in of steel bars. Theoretical concepts of an automatic separation had to be tested in everyday production. For this a prototype system was to be constructed. The aim was to be the separation of man and machinery in the workplace.
At the beginning preliminary experiments for the separation of uneven bars were carried out. The most important findings are as follow:
- separation crosswise to the longitudinal lie of the bars is not recommended as, due to the degree of disorganisation of the bars in the bundle, the release of a single bar from the bundle is not possible
- bars can be separated easily from the bundle by extraction in the longitudinal direction
- by extracting the bars in the longitudinal direction high forces of separation can be fed into the bars without the risk of bending them
- in order to increase the accessibility of the bars to gripping them in the bundle the front end of the bar has to be separated (e.g. by spreading the bundle)
- sliding movements of bars are preferable to a falling movement (noise reduction)
On the basis of these findings solutions were developed for the identification of the front end of a bar, respectively for the separation of such, so that it might be gripped securely and separated. The feasibility of the different solutions was studied and evaluated in field tests. The most suitable solutions were then combined, respectively expanded until the optimal solution was found.
Krupp Stahl AG produces mainly high-grade structural steel, tool steel and high-alloy special steel, which are rolled to semi-finished products and steel bars, at its mill in Siegen. During the ensuing heat treatments all usual processes are carried out. Uneven round sections with diameters ranging from about 20 mm to 105 mm and a length of between 2.6 m and 9 m are finished.
Depending on the heat treatments carried out the round steel bars are differently warped. During the feed-in process the employees have to separate the uneven bars manually and feed them into the straightening machine. The danger of accident is very great at this point.
At present there is no functioning system for the automatic separation and feeding-in of uneven steel bars with an extreme warp.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Données non disponibles
Coordinateur
57078 Siegen
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.