Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

Centre of Excellence in Production Informatics and Control

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Project Leaflet (s’ouvre dans une nouvelle fenêtre)

The task covers preparing leaflets as dissemination materials, with updates taking into account project progress. The goal of the task is to reach a (geographically and by sectors) wide range of stakeholders, both to disseminate project results and favour cross-fertilization.

EPIC Flipboard Magazine (s’ouvre dans une nouvelle fenêtre)

An online digest of current EPIC topic related developments will be created using the Flipboard (flipboard.com) social-network aggregation, magazine-format application software. The EPIC Flipboard magazine will integrate scientific and technological news and articles from both the consortium and media outlets from around the world and present them in a digital magazine format where pages can be “flipped”. First version will be available M6, while regular updates will follow during the whole project period.

Dissemination actions report (e.g.: publications, events organisations, special issues editing, press releases) (s’ouvre dans une nouvelle fenêtre)

Objectives- Scientific dissemination to boost visibility and international reputation of staff/institutions involved,- Incite overtures for fruitful new scientific collaborations,- Stimulate increase in academic citations and international impact.Dissemination activities such as publications, events, specials issues, press releases will be summarized in the deliverable .

Design and publishing of the project's official web-site and local partner web-sites (s’ouvre dans une nouvelle fenêtre)

The project’s official web-site is to be the linking point between EPIC partners and outer communities. The essential principle for the site development is the requirement to be content rich, up-to-date, easy to navigate. An Intraweb facility for sharing of internal documents by consortium members will be provided as well. In addition, each partner will have a web page on its local server containing an overview of the project and linked to the project’s official site.Updates will follow the project evolution.

Mobilized researchers and scientific and transversal skills report (s’ouvre dans une nouvelle fenêtre)

Objectives- Advancement of S&T experience and knowledge of researchers,- Enhancement and diversification of the research potential, improvement of analytical capabilities and implementation of new research methods,- Exposure of scientific staff to different schools of thought, to multicultural/ethnical environment, different history and different cultural values at each hosting partner,- Development/ enhancement of researchers skills in teamwork and other transversal skills,- Establishment of personal contacts and links among staff of partner institutions.

Workshop-series (events and report) (s’ouvre dans une nouvelle fenêtre)

In conjunction with the plan elaborated under T7.5, this task will cover the organization of workshops with industry to support user-driven innovation, collaborative projects with industry and technology transfer. Workshops will be based on past experience events like the Fraunhofer Energy Efficiency Days and national events explicitly inviting industry and SMEs, respectively. The workshops will have two main thematic aspects: (1) To extend contact with industry and gain more insight into current demands and needs. In return, the research consortium presents novel research trends and results from the partners’ expertise. The mixture of presenting contents from all participants and interactive sessions like personal dialogues, discussion rounds in smaller groups, speed networking slots and concepts like world cafés will bring participants closer together. (2) Innovation acceptance and avoiding fear of technology. Besides all progress and manifesting visions in the ICT, users who need to apply technology within their daily working business must benefit and therewith accept technology. This is only possible if innovation meets user expectations, facilitates their lives and avoids mistrust related to the individual privacy.A one-day workshop including analysis of theories of gender, diversity, equality, and migration from an integration point of view will be organised.This task is part of the EPIC sustainability actions. The workshop will overview funding opportunities given by Community Programmes, Transnational and Territorial Cooperation, Intergovernmental, EU & Beyond Programmes, respectively proposal evaluation procedures and will draft concrete proposals for future collaborations. Relying on the synergy map elaborated under T9.9, it will be an invitation-based event, where strategic academic and industrial partners of EPIC members will be purposely invited to form consortia on topics related to the EPIC theme. Furthermore, recommendations for funding boards (e.g.: NKFIH) in emerging technologies related to the topic will be formulated as well.

Catalogue of Apps for iAcademy Online Learning Platform (s’ouvre dans une nouvelle fenêtre)

The Fraunhofer Academy is the Fraunhofer-Gesellschaft's specialist provider of continuing education and provides the software iAcademy, a learning app produced specifically for mobile devices, turning them into an efficient tool for educational training. The iAcademy app organizes the teaching content of the continuing education programs in a learning map based on modular units, with quizzes to monitor learning progress and additional multimedia content in the form of videos, graphics and learning games. During the project, the partners will continuously develop mobile learning modules and publish it for free as a download in the iAcademy online store. As a starting point, educational content regarding Cyber Physical Systems, Industry 4.0 and Data Analytics will be provided. Further content and offers will be derived from the initial survey from T6.1.

Digital Learning CPPS-Toolbox (s’ouvre dans une nouvelle fenêtre)

The task aims to demonstrate to the manufacturing and logistics industry how they can improve their processes by implementing novel CPP strategies by:- Providing industrial examples- Sharing success stories (Good Practices)- Providing training objects which can help to think differently- Providing elements (Focused on SME) to guide a company in such a strategic processTherefore, a Digital Learning CPPS-Toolbox is developed based on the specific needs of the target market derived in T6.1. Once the Digital Learning CPPS-Toolbox is launched the Project partners will continuously fill this Toolbox with content and share it with the targeting market. The content of this Digital Learning CPPS-Toolbox will be compatible with smart phones and digital tablets to improve the usability and raise excitement.

Publications

Factory of the Year Prize – A Benchmarking (s’ouvre dans une nouvelle fenêtre)

Auteurs: Viola Gallina, Zsolt János Viharos, Gabor Nick, Maik Frye, Andreas Kluth, Robert H. Schmitt
Publié dans: "18th IMEKO TC10 Conference ""Measurement for Diagnostics, Optimisation and Control to Support Sustainability and Resilience""", 2022
Éditeur: IMEKO
DOI: 10.21014/tc10-2022.005

Investigation of drilling-induced delamination considering mechanical supporting conditions in glass fibre reinforced polymer (GFRP) composites

Auteurs: LUKÁCS Tamás, GEIER Norbert
Publié dans: 32nd International Conference on Mechanical Engineering, 2024
Éditeur: EMT Hungarian Technical Scientific Society of Transylvania

Semi-automatic process control for efficient refurbishment of turbine blades.

Auteurs: E. Uhlmann, J. Polte, C. Mühlich, S. Mönchinger, P. Ebrahimi
Publié dans: 23rd International Conference of the European Society for Precision Engineering and Nanotechnology, 2023
Éditeur: EUSPEN

PIKTOR-O-BOT: INTEGRATED IMAGE PROCESSING ALGORITHMS FOR PORTRAIT DRAWING ROBOT APPLICATIONS

Auteurs: Anh Tuan Hoang, János Csempesz, Tamás Cserteg, Zsolt János Viharos
Publié dans: IMEKO (World Congress 2024), 2024
Éditeur: IMEKO (World Congress 2024)

Structured Analysis of Methodologies for the Assessment of the Technological Capability of RTOs – Using a Method Engineering Approach.

Auteurs: Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S
Publié dans: ECIE 2020 - 15th European Conference on Innovation and Entrepreneurship, 2020, ISBN 1912764687
Éditeur: ECIE

Benchmarking of Data Preprocessing Methods for Machine Learning Applications in Production (s’ouvre dans une nouvelle fenêtre)

Auteurs: Maik Frye, Johannes Mohren, Robert H. Schmitt
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.1016/j.procir.2021.11.009

Digital twin assisted workpiece referencing for compensating the stock deviation of casted parts (s’ouvre dans une nouvelle fenêtre)

Auteurs: Tamás Cserteg, Gábor Erdős, Gergely Horváth, András Kovács
Publié dans: Procedia CIRP, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2023
Éditeur: Elsevier
DOI: 10.1016/j.procir.2023.06.050

Investigation of multi-axis edge trimming technology of carbon fibre-reinforced polymer (CFRP) composites in terms of machining-induced burr and surface roughness

Auteurs: TIMA Tamás Sándor, GEIER Norbert
Publié dans: 32nd International Conference on Mechanical Engineering, 2024
Éditeur: EMT Hungarian Technical Scientific Society of Transylvania

Identifying and Analyzing Data Model Requirements and Technology Potentials of Machine Learning Systems in the Manufacturing Industry of the Future (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gunter Schuh, Paul Scholz, Thomas Leich, Richard May
Publié dans: 2020 61st International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS), 2020, Page(s) 1-10, ISBN 978-1-7281-9105-8
Éditeur: IEEE
DOI: 10.1109/itms51158.2020.9259303

Reducing remanufacturing uncertainties with the digital product passport (s’ouvre dans une nouvelle fenêtre)

Auteurs: Barna Gal, Adam Szaller, Daniel Bachlechner, Elisabeth Zudor, Wilfried Sihn
Publié dans: Proceedings of the 18th Global Conference on Sustainable Manufacturing,, 2022, ISBN 978-3-031-28838-8
Éditeur: Springer, Cham
DOI: 10.1007/978-3-031-28839-5_7

Reconfigurable Production Systems (RMS) - First Results of A SurveyAbout the Intelligent Production of the Future (s’ouvre dans une nouvelle fenêtre)

Auteurs: Nick Gábor, Szaller Ádám, Christian Fries
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.1016/j.procs.2021.01.137

Extension of the CCMS 2.0 maturity model towards artificial intelligence (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gábor Nick, Andrea Kő, Ádám Szaller, Klaudia Éva Zeleny, Botond Kádár, Tibor Kovács
Publié dans: IFAC-PapersOnLine, 2022, ISSN 2405-8963
Éditeur: Elsevier
DOI: 10.1016/j.ifacol.2022.09.403

Identification and Characterization of Challenges in the Future of Manufacturing for the Application of Machine Learning (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gunther Schuh, Paul Scholz, Maximilian Nadicksbernd
Publié dans: 2020 61st International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS), 2020, Page(s) 1-10, ISBN 978-1-7281-9105-8
Éditeur: IEEE
DOI: 10.1109/itms51158.2020.9259318

Technology Audit: Procedure for the Assessment of the Technological Maturity of Applied R&D Organizations

Auteurs: Hecklau, Fabian; Kidschun, Florian; Kohl, Holger
Publié dans: 2022, ISBN 978-1-914587-36-8
Éditeur: ACI

Impact assessment of fillers on the machinability of carbon fibre reinforced polymer composites (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gergely Magyar, Dániel István Poór, Tamás Lukács, Péter Tamás-Bényei, Norbert Geier
Publié dans: Procedia CIRP, 2023
Éditeur: Elsevier
DOI: 10.1016/j.procir.2023.06.143

Upskilling SME Workforce by Learning Factories (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gyulai, Tamás; Viharos, Zsolt János; Kása, Ferenc ; Wolf, Peter
Publié dans: 13th Conference on Learning Factories (CLF 2023), 2023
Éditeur: SSRN
DOI: 10.2139/ssrn.4469802

Impact of Customer Order Change Dimensions on Order Management (s’ouvre dans une nouvelle fenêtre)

Auteurs: Christian Fries, Ádám Szaller, Thomas Bauernhansl, Günther Schuh
Publié dans: EEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2022
Éditeur: IEEE
DOI: 10.1109/ieem55944.2022.9989974

Intelligent production of the future – first results of a survey

Auteurs: Nick, G.; Szaller, Á.; Viharos, Zs. J.; Várgedő, T.; Bányai, D.; Fries, C.; Fechter, M
Publié dans: 2020, ISBN 978-92-990084-6-1
Éditeur: IMEKO

Influence of fixturing setup on quality of edge trimmed UD-CFRP

Auteurs: Pereszlai, Cs.; Geier, N.; Poór, D
Publié dans: Proceedings of International Conference on Innovative Technologies, 2019, Page(s) 106-109, ISSN 0184-9069
Éditeur: Faculty of Engineering, University of Rijeka

Operational Structure for an Industry 4.0 oriented Learning Factory (s’ouvre dans une nouvelle fenêtre)

Auteurs: Tamás Gyulai, Péter Wolf, Ferenc Kása, Zsolt János Viharos
Publié dans: "18th IMEKO TC10 Conference ""Measurement for Diagnostics, Optimisation and Control to Support Sustainability and Resilience""", 2022
Éditeur: IMEKO
DOI: 10.21014/tc10-2022.016

Enabling distance learning and remote collaboration in layout and process planning (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zsolt Kemény, Richárd Beregi, Mátyás Hajós, János Csempesz, János Nacsa
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.2139/ssrn.3858609

A multi-criteria approach for assessing resilience, sustainability and efficiency measures in manufacturing companies (s’ouvre dans une nouvelle fenêtre)

Auteurs: Luisa Reichsthaler, Daniel Toth, Ádám Szaller, Wilfried Sihn
Publié dans: 56th CIRP Conference on Manufacturing Systems., 2023
Éditeur: Elsevier
DOI: 10.1016/j.procir.2023.09.035

Harmonization of Heterogeneous Asset Administration Shells (s’ouvre dans une nouvelle fenêtre)

Auteurs: Nikolaos-Stefanos Koutrakis, Varun Gowtham, Wenzel Baron Pilar von Pilchau, Thomas Josef Jung, Julian Polte, Jörg Hähner, Marius-Iulian Corici, Thomas Magedanz, Eckart Uhlmann
Publié dans: 2022
Éditeur: Elsevier
DOI: 10.1016/j.procir.2022.04.016

Concept of a modular hardware platform for automation extension experiments (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zsolt Kemény, Richárd Beregi, Kristóf Abai
Publié dans: 13th Conference on Learning Factories, CLF2023, 2023
Éditeur: Elsevier
DOI: 10.2139/ssrn.4469200

A hybrid simulation tool to improve the energy efficiency in production environment * (s’ouvre dans une nouvelle fenêtre)

Auteurs: B. Zhou, M. Frye, C. Sander, R. H. Schmitt
Publié dans: 2019 IEEE International Conference on Systems, Man and Cybernetics (SMC), Numéro Bari, 2019, Page(s) 2103-2108, ISBN 978-1-7281-4569-3
Éditeur: IEEE
DOI: 10.1109/smc.2019.8914514

Derivation of Constituent Problem Characteristics for the Application of Machine Learning Systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Günther Schuh, Paul Scholz, Timon Burger
Publié dans: 2021
Éditeur: IEEE
DOI: 10.1109/icict52872.2021.00014

Work in Progress Level Prediction with Ling Short-Term Memory Recurrent Neural Network (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gallina, V., Lingitz, L. Breitschopf, J., Zudor, E., Sihn, W
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2021.07.047

Prediction of Quality in Thermographic Spray Spot Applications with Machine Learning Algorithms (s’ouvre dans une nouvelle fenêtre)

Auteurs: Eckart Uhlmann, Julian Polte, Nikolaos-Stefanos Koutrakis, Lasse Pyka, Müslüm Ider, Georg Thomas, Christian Rupprecht
Publié dans: 56th CIRP International Conference on Manufacturing Systems, 2023
Éditeur: Elsevier
DOI: 10.1016/j.procir.2023.09.151

Investigation of ductile/brittle chip formation zone in the context ofmanufactured geometry with different CAM paths strategies (s’ouvre dans une nouvelle fenêtre)

Auteurs: László Móricz, Zsolt Viharos János
Publié dans: 10th IFAC Conference on Manufacturing Modelling, Management and Control, 2022, ISBN 9781713865124
Éditeur: IFAC
DOI: 10.1016/j.ifacol.2022.10.051

Vibration Based Cutting Tool Path Differentiation by Feature Selection (s’ouvre dans une nouvelle fenêtre)

Auteurs: Móricz, L ; Viharos, Zs J
Publié dans: "18th IMEKO TC10 Conference ""Measurement for Diagnostics, Optimisation and Control to Support Sustainability and Resilience""", 2022
Éditeur: IMEKO
DOI: 10.21014/tc10-2022.025

Simulation Framework for Evaluating Production Networks. Middle-European Conference on Applied Theoretical Computer Science

Auteurs: Egri, P.; Váncza, J.; Szaller, Á.; Monostori, J
Publié dans: Middle-European Conference on Applied Theoretical Computer Science, 2019, Page(s) 22-25, ISSN 2630-371X
Éditeur: Information Society

Drilling-induced delamination measurement using a novel digital image processing algorithm. (s’ouvre dans une nouvelle fenêtre)

Auteurs: Tamás Lukács, Csongor Pereszlai, Gergely Magyar, Norbert Geier
Publié dans: Procedia CIRP, 2023
Éditeur: Elsevier
DOI: 10.1016/j.procir.2023.06.142

Case study on technological applications for production planning and control in the context of Industry 4.0 (s’ouvre dans une nouvelle fenêtre)

Auteurs: Schuh, G.; Patrick, S
Publié dans: . 1st Conference on Produc, Numéro 1, 2020
Éditeur: Institutionelles Repositorium der Leibniz Universität Hannover
DOI: 10.15488/9683

Tool failure recognition using inconsistent data (s’ouvre dans une nouvelle fenêtre)

Auteurs: Júlia Bergmann, Klaudia Éva Zeleny, József Váncza, Andrea Kő
Publié dans: Procedia CIRP, 2022, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2022.05.132

Experimental analysis of machining-induced burrs in micro-drilled CFRP composite

Auteurs: SEPRŐS Szilárd, GEIER Norbert
Publié dans: 32nd International Conference on Mechanical Engineering, 2024
Éditeur: EMT Hungarian Technical Scientific Society of Transylvania

CCMS Model – a Novel Approach to Digitalization Level Assessment for Manufacturing Companies

Auteurs: Nick, G.; Szaller, À.; Várgedő, T
Publié dans: European conference on management, leadership and governance, 2020, ISSN 2048-9021
Éditeur: Academic Conferences International Limited

Learning Factories towards Industry 5.0: Evolutionary or Revolutionary? (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gyulai, T ; Wolf, P ; Kása, F ; Viharos, Zs J
Publié dans: 19th IMEKO TC10 Conference “MACRO meets NANO in Measurement for Diagnostics, Optimization and Control”, 2023
Éditeur: IMEKO
DOI: 10.21014/tc10-2023.017

Pilot factories in the frame of centre of excellence in production informatics and control.

Auteurs: Czampa, M.; Szalay, T.; Nacsa J.; Nausch, M
Publié dans: Proceedings of International Conference on Innovative Technologies, 2019, Page(s) 88-91, ISSN 0184-9069
Éditeur: Faculty of Engineering, University of Rijeka

Distributed real-time production control for resilient manufacturing systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Eckart Uhlmann, Julian Polte, Christopher Mühlich
Publié dans: Procedia CIRP, 2023
Éditeur: Elsevier
DOI: 10.1016/j.procir.2023.09.162

With synthetic data towards part recognition generalized beyond the training instances (s’ouvre dans une nouvelle fenêtre)

Auteurs: Paul Koch; Marian Schlüter; Jörg Krüger
Publié dans: Modern Materials and Manufacturing, 2023
Éditeur: AIP Publishing
DOI: 10.1063/5.0189847

Univerzális mechanikus megfogó vizsgálata optikai elven működő erőmérő használatával

Auteurs: Nagy, A. T.; Paniti, I
Publié dans: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020, Page(s) 333-337, ISSN 2668-9685
Éditeur: Erdélyi Magyar Műszaki Tudományos Társaság (EMT)

Resource Sharing Manufacturing Network under Turbulences (s’ouvre dans une nouvelle fenêtre)

Auteurs: Ádám Szaller, Christian Fries, Gábor Nick, Botond Kádár
Publié dans: Proceedings of the 18th European Conference on Management Leadership and Governance, 2022
Éditeur: Academic Conferences International Limited, Reading
DOI: 10.34190/ecmlg.18.1.885

Comparison of Artificial Neural Network Technique-Based Failure Predictions of Mechanical Components (s’ouvre dans une nouvelle fenêtre)

Auteurs: Basheer Shaheen, István Németh and Ádám Kocsis
Publié dans: 2022 6th International Conference on System Reliability and Safety (ICSRS), 2022, ISBN 978-1-6654-7092-6
Éditeur: IEEE
DOI: 10.1109/icsrs56243.2022.10067554

A pilot experimental research on drilling of cfrp under tensile stress

Auteurs: Poór, D.; Geier, N.; Pereszlai, Cs.; Forintos, N
Publié dans: Proceedings of International Conference on Innovative Technologies, 2019, Page(s) 126-129
Éditeur: Faculty of Engineering, University of Rijeka

Machinability analysis of thermosetting epoxy resin through turning experiments

Auteurs: GEIER Norbert, SEPRŐS Szilárd, POÓR Dániel István
Publié dans: 32nd International Conference on Mechanical Engineering, 2024
Éditeur: EMT Hungarian Technical Scientific Society of Transylvania

Reinforcement Learning for Statistical Process Control in Manufacturing

Auteurs: Viharos, Zs. J.; Jakab, R. B.
Publié dans: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Page(s) 225-234, ISBN 978-92-990084-6-1
Éditeur: IMEKO

Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, Jinyang Xu, Csongor Pereszlai, Dániel István Poór, J. Paulo Davim
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2021.07.045

Transforming Experimental Cobot Cell to Industrial Realization – an Ethical AI Approach (s’ouvre dans une nouvelle fenêtre)

Auteurs: Mezgár I., Váncza J, Paniti I, Tóth J
Publié dans: IFAC WC 2023, 2023
Éditeur: IFAC
DOI: 10.1016/j.ifacol.2023.10.347

Robotos pakolási feladat megoldása környezetérzékelés segítségével

Auteurs: Hajós, M.; Horváth, D.
Publié dans: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020, Page(s) 305-308, ISSN 2668-9685
Éditeur: Erdélyi Magyar Műszaki Tudományos Társaság (EMT)

A cost-based model for integrating maintenance strategies in autonomous production control

Auteurs: Glawar, R.; Ansari, F.; Viharos, Zs. J.; Matyas, K.; Sihn, W
Publié dans: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Page(s) 258-264, ISBN 978-92-990084-6-1
Éditeur: IMEKO

Quantitative benefits of the digital product passport and data sharing in remanufacturing. (s’ouvre dans une nouvelle fenêtre)

Auteurs: A. Szaller, V. Gallina, B. Gal, A. Gaal, C. Fries
Publié dans: 56th CIRP Conference on Manufacturing Systems, 2023
Éditeur: Elsevier
DOI: 10.1016/j.procir.2023.09.102

Investigation on stereo-ToF data fusion for the inspection of used industrial parts (s’ouvre dans une nouvelle fenêtre)

Auteurs: Oliver Krumpek; Marian Schlüter; Johannes Hügle
Publié dans: Modern Materials and Manufacturing 2023, AIP Conf. Proc, 2023
Éditeur: AIP Publishing
DOI: 10.1063/5.0189300

Autonomous Vehicle Drift With a Soft Actor-criticReinforcement Learning Agent (s’ouvre dans une nouvelle fenêtre)

Auteurs: Tóth, Sz. H.; Bárdos, Á.; Viharos Zs. J.
Publié dans: 2022
Éditeur: IEEE
DOI: 10.1109/sami54271.2022.9780803

Anticipating VUCA by Utilizing the Potential of Technological and Logistical Degreesof Freedom. Advances in Production Management Systems. (s’ouvre dans une nouvelle fenêtre)

Auteurs: Julian Maier, Hans-Hermann Wiendahl
Publié dans: Advances in Production Management Systems. Production Management Systems for Volatile, Uncertain, Complex, and Ambiguous Environments, 2024
Éditeur: Springer
DOI: 10.1007/978-3-031-71645-4_9

Guideline for Deployment of Machine Learning Models for Predictive Quality in Production (s’ouvre dans une nouvelle fenêtre)

Auteurs: Henrik Heymann, Maik Frye, Alexander D. Kies, Robert H. Schmitt, Andrés Boza
Publié dans: 2022
Éditeur: Elsevier
DOI: 10.1016/j.procir.2022.05.068

Böngésző alapú felhasználói felület Panda robothoz

Auteurs: Bocsi, K.; Nacsa, J
Publié dans: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020, Page(s) 289-292, ISSN 2668-9685
Éditeur: Erdélyi Magyar Műszaki Tudományos Társaság (EMT)

Lead time prediction in a flow-shop environment with analytical and machine learning approaches

Auteurs: Gyulai, D., Pfeiffer, A., Nick, G., Gallina, V., Sihn, W., Monostori, L.
Publié dans: 16th IFAC Symposium on Information Control Problems in Manufacturing, 2018
Éditeur: IFAC

Human Resources Management: Meta-Study - Analysis of Future Competences in Industry 4.0

Auteurs: Hecklau, F.; Orth, R.; Kidschun, F.; Kohl, H
Publié dans: 13th European Conference on Management Leadership and Governance, 2017, ISBN 978-1-911218-63-0
Éditeur: nn

Improving the Accuracy of Cycle Time Estimation for Simulation in Volatile Manufacturing Execution Environments (s’ouvre dans une nouvelle fenêtre)

Auteurs: Pfeiffer A., Gyulai D., Monostori L.
Publié dans: ASIM 2017 Conference, 2017, ISBN 978-3-7376-0192-4
Éditeur: kassel university press
DOI: 10.19211/KUP9783737601931

How to Achieve Physical Internet through Lean Principles and Industry 4.0

Auteurs: Gizem Erboz, Dr. Gábor Bohács, Dr. Zoltán Szegedi
Publié dans: 4. Wissenschaftliche Industrielogistik-Dialog 2017 (WiLD 2017), 2017
Éditeur: nn

Digital Twin in manufacturing: A categorical literature review

Auteurs: Werner Kritzinger, Matthias Karner, Georg Traar, Jan Henjes, Wilfried Sihn
Publié dans: 16th IFAC Symposium on Information Control Problems in Manufacturin, 2018
Éditeur: IFAC

Integrating machine tool condition monitoring and production scheduling in metal forming

Auteurs: Matthias Karner, Robert Glawar, Wilfried Sihn, Kurt Matyas
Publié dans: International Conference Management of Technology – Step to Sustainable Production (MOTSP 2018), 2018
Éditeur: nn

Investigation of Micro Milled Surface Characteristics

Auteurs: B.-Z. Balázs, T Szalay, M. Takács
Publié dans: International Conference on Innovative Technologies: IN-TECH 2017, 2017, ISSN 0184-9069
Éditeur: nn

Dynamical Aspects of Micro Milling Process

Auteurs: M. Takács, B.-Z. Balázs, J.-C. Jáuregui
Publié dans: International Conference on Innovative Technologies, 2017, ISSN 0184-9069
Éditeur: nn

Simulation and scheduling of AGV based robotic assembly systems

Auteurs: Andor Viharos, István Németh
Publié dans: IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018),, 2018
Éditeur: IFAC

Analysing and Optimizing 2.5D Circular Pocket Machining Strategies (s’ouvre dans une nouvelle fenêtre)

Auteurs: Adam Jacso, Tibor Szalay
Publié dans: 2017, Page(s) 355-364
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-68619-6_34

PRODUCTION LOG DATA ANALYSIS FOR REJECT RATE PREDICTION AND WORKLOAD ESTIMATION (s’ouvre dans une nouvelle fenêtre)

Auteurs: Andras Pfeiffer, David Gyulai, Adam Szaller, Laszlo Monostori
Publié dans: 2018 Winter Simulation Conference (WSC), 2018, Page(s) 3364-3374, ISBN 978-1-5386-6572-5
Éditeur: IEEE
DOI: 10.1109/wsc.2018.8632482

A Novel Big-data-based Estimation Method of Side-slip Angles for Autonomous Road Vehicles (s’ouvre dans une nouvelle fenêtre)

Auteurs: Dániel Fényes, Balázs Németh, Péter Gáspár
Publié dans: Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics, 2018, Page(s) 420-426, ISBN 978-989-758-321-6
Éditeur: SCITEPRESS - Science and Technology Publications
DOI: 10.5220/0006849504200426

Anti-Lock Braking Control Design for Electric Vehicles Using LPV Methods (s’ouvre dans une nouvelle fenêtre)

Auteurs: Balazs Nemeth, Mate Fazekas, Peter Gaspar
Publié dans: 2018 26th Mediterranean Conference on Control and Automation (MED), 2018, Page(s) 1-6, ISBN 978-1-5386-7890-9
Éditeur: IEEE
DOI: 10.1109/med.2018.8442426

Reconfiguration control of in-wheel electric vehicle based on battery state of charge (s’ouvre dans une nouvelle fenêtre)

Auteurs: Andras Mihaly, Pater Gaspar
Publié dans: 2018 European Control Conference (ECC), 2018, Page(s) 1-6, ISBN 978-3-9524-2698-2
Éditeur: IEEE
DOI: 10.23919/ecc.2018.8550283

Side-slip Angle Estimation of Autonomous Road Vehicles Based on Big Data Analysis (s’ouvre dans une nouvelle fenêtre)

Auteurs: Daniel Fenyes, Balazs Nemeth, Mate Asszonyi, Peter Gaspar
Publié dans: 2018 26th Mediterranean Conference on Control and Automation (MED), 2018, Page(s) 849-854, ISBN 978-1-5386-7890-9
Éditeur: IEEE
DOI: 10.1109/med.2018.8443010

The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)

Auteurs: Hecklau, Fabian; Orth, Ronald; Kidschun, Florian; Nick, Gabor
Publié dans: European Conference on Management, Leadership and Governance, 2018, ISBN 978-1-912764-01-3
Éditeur: """Dr. Ing. Benny M.E. de Waal Prof. dr. Pascal Ravesteijn"""

Corporate Governance: The Evaluation Based Approach to the Governance and Business Models of the EPIC Centre of Excellence in Production Informatics and Control (EPIC Coe)

Auteurs: Monostori, László and Kádár, Botond and Nick, Gábor András and Pfeiffer, András and Várgedő, T.
Publié dans: Proceedings of the 14th European Conference on Management, Leadership and Governance, 2018, Page(s) 161-170, ISBN 9781-912764020
Éditeur: """Dr. Ing. Benny M.E. de Waal Prof. dr. Pascal Ravesteijn"""

Quality Improvement of Milling Processes Using Machine Learning-Algorithms

Auteurs: Maik Frye, Robert H. Schmitt
Publié dans: 16th IMEKO TC10 Conference“Testing, Diagnostics & Inspection as a comprehensive value chain for Quality & Safety, 2019, Page(s) 142-147, ISBN 978-92-990084-1-6
Éditeur: IMEKO

Generating human work instructions from assembly plans

Auteurs: Kardos, Cs.; Kovács, A.; Pataki, B.E.; Váncza, J.
Publié dans: 28th International Conference on Automated Planning and Scheduling, Numéro 1, 2018, Page(s) 31-39
Éditeur: Delft University

Product quality and cutting tool analysis for micro-milling of ceramics

Auteurs: L Móricz, Zs. J. Viharos, A. Németh, A. Szépligeti
Publié dans: 16th IMEKO TC10 Conference, 2019, ISBN 978-92-990084-1-6
Éditeur: IMEKO

Issues in Manufacturing Automation & Robotics within the Past 4 Decades and Vision for the Next

Auteurs: Haidegger, G. and Paniti, I.
Publié dans: IEEE 23nd International Conference on Intelligent Engineering Systems, 2019, ISBN 9781-728112138
Éditeur: IEEE

Magnetic Assisted Ball Burnishing of Magnetizable and Non-Magnetizable Materials

Auteurs: Zsolt Ferenc Kovács, Zsolt János Viharos, János Kodácsy, Roland Sándor
Publié dans: 16th IMEKO TC10 Conference, 2019, Page(s) 32-38, ISBN 978-92-990084-1-6
Éditeur: IMEKO

Unified edge control for mobile robots based on VDA5050 and basys 4.0 - Architecture and interfaces (s’ouvre dans une nouvelle fenêtre)

Auteurs: Axel Vick; Sebastian Behling; Phillip Gesien; Eugen Funk
Publié dans: Modern Materials and Manufacturing, 2023
Éditeur: AIP Publishing
DOI: 10.1063/5.0189349

Preserving hands-on learning experience with physical equipment in distance learning—findings of a course pilot (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zsolt Kemény,Titanilla Komenda, Mátyás Hajós, Richárd Beregi, János Nacsa
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.2139/ssrn.4073821

Energy efficiency measures for metal forming using hydraulic and mechanical presses (s’ouvre dans une nouvelle fenêtre)

Auteurs: Mandy Preuß; Gregor Thiele; Jörg Krüger
Publié dans: Modern Materials and Manufacturing 2023, AIP Conf. Proc, 2023
Éditeur: AIP Publishing
DOI: 10.1063/5.0190607

Structured Data Preparation Pipeline for Machine Learning-Applications in Production

Auteurs: Frye, M.; Schmitt, R. H
Publié dans: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Page(s) 241-246, ISBN 978-92-990084-6-1
Éditeur: IMEKO

Lubricants and Affecting Parameters on Hardness in SPIF of AA1100 Aluminum

Auteurs: Paniti, I.; Najm, S. M.; Viharos, Zs. J
Publié dans: . 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Page(s) 387-392, ISBN 978-92-990084-6-1
Éditeur: IMEKO

Simulation-based Learning of the Peg-in-Hole Process using Robot-Skills (s’ouvre dans une nouvelle fenêtre)

Auteurs: Arik Lämmle; Philipp Tenbrock; Balázs Bálint; Frank Nägele; Werner Kraus; József Váncza; Marco F. Huber
Publié dans: IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2022
Éditeur: IEEE
DOI: 10.1109/iros47612.2022.9982212

Technological Trends in Context of Industry 4.0 and Their Industrial Applications (s’ouvre dans une nouvelle fenêtre)

Auteurs: Ing. Gunther Schuh, Patrick Scholz, Marc Patzwald
Publié dans: 2019 60th International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS), 2019, Page(s) 1-6, ISBN 978-1-7281-5709-2
Éditeur: IEEE
DOI: 10.1109/itms47855.2019.8940720

Comprehensive Comparison of MTM and BasicMOST, as the Most Widely Applied PMTS Analysis Methods

Auteurs: Viharos, Zs. J.; Bán, B
Publié dans: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Page(s) 393-401, ISBN 978-92-990084-6-1
Éditeur: IMEKO

Expert System for the Machine Learning Pipeline in Manufacturing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Maik Frye, Jonathan Krauß, Robert H. Schmitt
Publié dans: 2021
Éditeur: IFAC INCOM
DOI: 10.1016/j.ifacol.2021.08.014

Holistic Concept Towards a Reference Architecture Model for Predictive Maintenance (s’ouvre dans une nouvelle fenêtre)

Auteurs: Eckart Uhlmann, Julian Polte, Nikolaos-Stefanos Koutrakis
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.1016/j.procir.2021.11.241

Veränderte Kompetenzanforderungen im Rahmen von Digitalisierung und Industrie 4.0 (s’ouvre dans une nouvelle fenêtre)

Auteurs: Hecklau, F.; Orth, R.; Kidschun, F.; Tominaj, S.: Veränderte
Publié dans: State-of-the-Art and Outlook Proceedings of the 10th Knowledge Management in Digital Work Environments, 2020
Éditeur: Fachhochschule Potsdam
DOI: 10.34678/opus4-2412

Effect of CAM Path Strategies on Tool Life in Ceramics Micro-Cutting

Auteurs: Móricz, L.; Viharos, Zs. J.; Büki, M
Publié dans: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Page(s) 92-98, ISBN 978-92-990084-6-1
Éditeur: IMEKO

AI-based welding process monitoring for quality control in large-diameter pipe manufacturing

Auteurs: Sergej Gook, Bassel El-Sari, Max Biegler, Michael Rethmeier
Publié dans: 19th Pipeline Technology Conference, 2024
Éditeur: EITEP - Euro Institute for Information and Technology Transfer in Environmental Protection GmbH

Analyzing the Role of Research and Technology Organizations (RTOs) in National Innovation Systems (NIS)

Auteurs: Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S
Publié dans: ECMLG 2020 - 16th European Conference on Management Leadership and Governance, 2020, ISBN 1912764776
Éditeur: ECMLG

Procedure for the Assessment of the Technological Maturity of Applied R&D Organizations

Auteurs: Hecklau, Fabian; Kidschun, Florian; Kohl, Holger
Publié dans: 21stEuropean Conference on Research Methodology for Business and Management Studies, 2022
Éditeur: ACI

Drilling of curved carbon fibre reinforced polymer (CFRP) composite plates (s’ouvre dans une nouvelle fenêtre)

Auteurs: N Geier, Cs Pereszlai, DI Poór, BZ Balázs
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.1016/j.procir.2021.03.057

Co-Creation of Production Resources and Processes in Pilot and Learning Factories—a Case Study. (s’ouvre dans une nouvelle fenêtre)

Auteurs: Kemény, Zs.; Beregi, R.; Erdős, G.; Nacsa, J
Publié dans: IFAC World Congress 2023, 2023
Éditeur: IFAC
DOI: 10.1016/j.ifacol.2023.10.1148

Digital Twin training concept based on miniature demonstration factories (s’ouvre dans une nouvelle fenêtre)

Auteurs: Nikolaus Kremslehner, Thomas Sobottka, János Nacsa, Richárd Beregi, Sebastian Schlund
Publié dans: Proceedings of the 13th Conference on Learning Factories (CLF 2023), 2023
Éditeur: SSRN
DOI: 10.2139/ssrn.4458212

Flexible Manufacturing Concept at Bosch: A low-cost implementation of an Industry 4.0 concept (s’ouvre dans une nouvelle fenêtre)

Auteurs: László Fükő, Ádám Szaller, Eduardo Colangelo, Gábor Nick, Botond Kádár
Publié dans: 19th IMEKO TC10 Conference, 2023
Éditeur: IMEKO
DOI: 10.21014/tc10-2023.016

A two-step digitalization level assessment approach for manufacturing companies (s’ouvre dans une nouvelle fenêtre)

Auteurs: Nick Gábor, Szaller Ádám, Thomas Scheuer
Publié dans: 2021
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2021.07.005

Maturity Model for AI in Smart Production Planning and Control System (s’ouvre dans une nouvelle fenêtre)

Auteurs: Eduardo Colangelo; Christian Fries; Theresa-Franziska Hinrichsen; Ádám Szaller; Gábor Nick
Publié dans: 2022
Éditeur: Elsevier
DOI: 10.1016/j.procir.2022.05.014

Programming and control challenges of the portrait drawing Piktor-o-bot

Auteurs: János Csempesz, Tamás Cserteg, Kristóf Abai, János Nacsa
Publié dans: IMEKO (World Congress 2024), 2024
Éditeur: IMEKO (World Congress 2024)

Automated vehicle fleet management in relentless production – a case study in semi-conductor manufacturing

Auteurs: Bergmann, J.; Váncza, J,; Kovács, A
Publié dans: 32nd EURO Conference, Association of European Operational Research Societies, Finnish Operations Research Society, 2022
Éditeur: Aalto University

Development of the Supply Chain Management 2040 – Opportunities and challenges (s’ouvre dans une nouvelle fenêtre)

Auteurs: Schiffer, M.; Dörr, D. M.
Publié dans: 1st Conference on Production Systems and Logistics, Numéro 1, 2020, Page(s) 29-37
Éditeur: publish‐Ing.
DOI: 10.15488/9644

Moduláris szerelési paletta oktatási célú kollaboratív robotosmunkaállomáshoz

Auteurs: Szűr, D.; Nacsa, J.; Beregi, R.; Kemény, Z
Publié dans: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020, Page(s) 351-354, ISSN 2668-9685
Éditeur: Erdélyi Magyar Műszaki Tudományos Társaság (EMT)

Condition Monitoring Concept for Industrial Robots

Auteurs: Uhlmann, E.; Polte, J.; Geisert, C.
Publié dans: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Page(s) 253-257, ISBN 978-92-990084-6-1
Éditeur: IMEKO

Passivity analysis of rational LPV systems using Finsler’s lemma (s’ouvre dans une nouvelle fenêtre)

Auteurs: Peter Polcz, Balazs Kulcsar, Tamas Peni, Gabor Szederkenyi
Publié dans: 2019 IEEE 58th Conference on Decision and Control (CDC), 2019, Page(s) 3793-3798, ISBN 978-1-7281-1398-2
Éditeur: IEEE
DOI: 10.1109/cdc40024.2019.9029877

Customer-Induced Planning Deviations within Order Management (s’ouvre dans une nouvelle fenêtre)

Auteurs: Christian Fries; Thomas Bauernhansl
Publié dans: 2022
Éditeur: Elsevier
DOI: 10.1016/j.procs.2022.01.206

Developing Digital Twins for energy efficiency in the production phase of products (s’ouvre dans une nouvelle fenêtre)

Auteurs: Sebastian Wehking, Theresa Riedelsheimer, Cansu Tanrikulu, Kai Lindow
Publié dans: 31st CIRP Conference on Life Cycle Engineering, 2024
Éditeur: Elsevier
DOI: 10.1016/j.procir.2024.01.126

Experimental investigation of machining-induced interlayer burr in Al/CFRP sandwich structures

Auteurs: MARKÓ Balázs, GEIER Norbert
Publié dans: 32nd International Conference on Mechanical Engineering, 2024
Éditeur: EMT Hungarian Technical Scientific Society of Transylvania

Usability investigation of portable coordinate measuring equipment.

Auteurs: Gábriel, M.; Czampa, M.; Szalay, T
Publié dans: Proceedings of International Conference on Innovative Technologies, 2019, Page(s) 102-105, ISSN 0184-9069
Éditeur: Faculty of Engineering, University of Rijeka

Dynamic Production Line Re-balancing by Alternative Plans for Compensating Equipment Failures. (s’ouvre dans une nouvelle fenêtre)

Auteurs: Tsutsumi, D.; Bergmann, J.; Dobrovoczki, P.; Hayashi, N,; Kovács, A.; Szádoczki, Zs.; Szaller, Á.; Umeda, S.
Publié dans: Procedia CIRP, 2023
Éditeur: Elsevier
DOI: 10.1016/j.procir.2023.09.080

Adaptive scheduling through machine learning-based process parameter prediction

Auteurs: Frye, M.; Gyulai, D.; Bergmann, J.; H. Schmitt, R
Publié dans: Conference on High Speed Machining, 2019, ISSN 1805-0476
Éditeur: MM Science Journal

Analysis of the relationship between fibre cutting angle and machining-induced burr in carbon fibre-reinforced polymer composites

Auteurs: MAGYAR Gergely, GEIER Norbert
Publié dans: 32nd International Conference on Mechanical Engineering, 2024
Éditeur: EMT Hungarian Technical Scientific Society of Transylvania

Concept for the Evaluation and Prioritization of Machine Learning Use Cases in Industrial Production (s’ouvre dans une nouvelle fenêtre)

Auteurs: G. Schuh; L. Cassel; Marc Uedelhoven
Publié dans: IEEE International Conference on Industrial Engineering and Engineering Management, 2023, ISSN 2157-3611
Éditeur: IEEM
DOI: 10.1109/ieem58616.2023.10406937

Financial aspects of a trust-based resource sharing platform (s’ouvre dans une nouvelle fenêtre)

Auteurs: Ádám Szaller, Christian Fries, Botond Kádár
Publié dans: CIRP Journal of Manufacturing Science and Technology, 2023, ISSN 1878-0016
Éditeur: Elsevier
DOI: 10.1016/j.cirpj.2023.03.004

Towards a connected factory: Shop-floor data analytics in cyber-physical environments (s’ouvre dans une nouvelle fenêtre)

Auteurs: Dávid Gyulai, Júlia Bergmann, Viola Gallina, Alexander Gaal
Publié dans: Procedia CIRP, Numéro 86, 2019, Page(s) 37-42, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2020.01.016

Optimizing the numerical algorithm in Fast Constant Engagement Offsetting Method for generating 2.5D milling tool paths (s’ouvre dans une nouvelle fenêtre)

Auteurs: Adam Jacso, Tibor Szalay
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 108/7-8, 2020, Page(s) 2285-2300, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-020-05452-1

Human-robot collision predictor for flexible assembly (s’ouvre dans une nouvelle fenêtre)

Auteurs: Imre Paniti, János Nacsa, Péter Kovács, Dávid Szur
Publié dans: ACTA IMEKO, 2021, ISSN 2221-870X
Éditeur: IMEKO
DOI: 10.21014/acta_imeko.v10i3.1072

Defining the Intelligent Manufacturing Enterprise (s’ouvre dans une nouvelle fenêtre)

Auteurs: Günther Schuh, Thomas Scheuer, Riley Colleen Padovano
Publié dans: Journal of Production Systems and Logistics, 2022, ISSN 2702-2587
Éditeur: Hannover : publish-Ing.
DOI: 10.15488/11731

ProSeqqo: A generic solver for process planning and sequencing in industrial robotics (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zahorán, L.; Kovács, A.
Publié dans: Robotics and Computer-Integrated Manufacturing, 2022, ISSN 0736-5845
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.rcim.2022.102387

Surface flatness and roughness evolution after magnetic assisted ball burnishing of magnetizable and non-magnetizable materials (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zsolt F. Kovács, Zsolt J. Viharos, János Kodácsy
Publié dans: Measurement, Numéro 158, 2020, Page(s) 107750, ISSN 0263-2241
Éditeur: Elsevier BV
DOI: 10.1016/j.measurement.2020.107750

Recent Developments and Future Challenges in Incremental Sheet Forming of Aluminium and Aluminium Alloy Sheets (s’ouvre dans une nouvelle fenêtre)

Auteurs: Trzepieciński, T; Najm, S M ; Oleksik, V ; Vasilca, D ; Paniti, I ; Szpunar, M
Publié dans: Metals, 2022, ISSN 2075-4701
Éditeur: MPDI
DOI: 10.3390/met12010124

Complementary Manipulator Tool Development for Safe Cobot-Assisted Hydroponics (s’ouvre dans une nouvelle fenêtre)

Auteurs: Imre Paniti, János Nacsa, Dávid Szűr, Sándor Rácz, József Tóth
Publié dans: Hungarian Journal of Industry and Chemistry, 2021, ISSN 2450-5102
Éditeur: University of Pannonia
DOI: 10.33927/hjic-2021-27

Off-line geometrical and microscopic & on-line vibration based cutting tool wear analysis for micro-milling of ceramics (s’ouvre dans une nouvelle fenêtre)

Auteurs: László Móricz, Zsolt J. Viharos, András Németh, András Szépligeti, Máté Büki
Publié dans: Measurement, Numéro 163, 2020, Page(s) 108025, ISSN 0263-2241
Éditeur: Elsevier BV
DOI: 10.1016/j.measurement.2020.108025

A critical review of the drilling of CFRP composites: Burr formation, characterisation and challenges (s’ouvre dans une nouvelle fenêtre)

Auteurs: Dániel István Poór, Norbert Geier, Csongor Pereszlai, Jinyang Xu
Publié dans: Composites Part B: Engineering, 2022, ISSN 1359-8368
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2021.109155

Parametric Effects of Single Point Incremental Forming on Hardness of AA1100 Aluminium Alloy Sheets (s’ouvre dans une nouvelle fenêtre)

Auteurs: Najm, S.M.; Paniti, I.; Trzepieciński, T.; Nama, S.A.; Viharos, Z.J.; Jacso, A
Publié dans: Materials, 2021, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma14237263

Adaptive network analytics for managing complex shop-floor logistics systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Dávid Gyulai, Júlia Bergmann, József Váncza
Publié dans: CIRP Annals, Numéro 69/1, 2020, Page(s) 393-396, ISSN 0007-8506
Éditeur: Hallwag AG
DOI: 10.1016/j.cirp.2020.04.002

The examination of the effect of variable cutting speeds on the surface and edge qualities of milled granite materials (s’ouvre dans une nouvelle fenêtre)

Auteurs: István Gábor Gyurika, Tibor Szalay
Publié dans: Advances in Mechanical Engineering, Numéro 11/7, 2019, Page(s) 168781401983631, ISSN 1687-8140
Éditeur: Sage Journals
DOI: 10.1177/1687814019836319

Artificial neural network for modeling and investigating the effects of forming tool characteristics on the accuracy and formability of thin aluminum alloy blanks when using SPIF (s’ouvre dans une nouvelle fenêtre)

Auteurs: Sherwan Mohammed Najm, Imre Paniti
Publié dans: The International Journal of Advanced Manufacturing Technology, 2021, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-021-06712-4

Comparative analysis of wobble milling, helical milling and conventional drilling of CFRPs (s’ouvre dans une nouvelle fenêtre)

Auteurs: Csongor Pereszlai, Norbert Geier
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 106/9-10, 2020, Page(s) 3913-3930, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-019-04842-4

Adaptive, Hybrid Feature Selection (AHFS) (s’ouvre dans une nouvelle fenêtre)

Auteurs: Viharos
Publié dans: Pattern Recognition, 2021, ISSN 0031-3203
Éditeur: Pergamon Press
DOI: 10.1016/j.patcog.2021.107932

Integration of Maintenance Management System Functions with Industry 4.0 Technologies and Features—A Review (s’ouvre dans une nouvelle fenêtre)

Auteurs: Basheer Shaheen, István Németh
Publié dans: Manufacturing Industry 4.0: Trends and Perspectives, 2022, ISSN 2078-2489
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/pr10112173

Evaluationof Economic Plausibility of Integrating Maintenance Strategies in Autonomous ProductionControl: A Case Study in Automotive Industry (s’ouvre dans une nouvelle fenêtre)

Auteurs: Robert Glawar, Fazel Ansari, Zsolt János Viharos, Kurt Matyas, Wilfried Sihn
Publié dans: 17th IFAC Symposium on Information Control Problems in Manufacturing, 2021, ISSN 2405-8963
Éditeur: IFAC
DOI: 10.1016/j.ifacol.2021.08.075

Drilling of recycled carbon fibre–reinforced polymer (rCFRP) composites: analysis of burrs and microstructure (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, Dániel István Poór, Csongor Pereszlai, Péter Tamás-Bényei
Publié dans: The International Journal of Advanced Manufacturing Technology, 2022, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-022-08847-4

Digital Twins within the Circular Economy: Literature Review and Concept Presentation. Sustainability (s’ouvre dans une nouvelle fenêtre)

Auteurs: Janine Mügge, Anne Seegrün, Tessa-Katharina Hoyer, Theresa Riedelsheimer and Kai Lindow
Publié dans: MDPI, 2024, ISSN 2078-2489
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/su16072748

Joint optimization of product tolerance design, process plan, and production plan in high-precision multi-product assembly (s’ouvre dans une nouvelle fenêtre)

Auteurs: Daisuke Tsutsumi, Dávid Gyulai, András Kovács, Bence Tipary, Yumiko Ueno, Youichi Nonaka, Kikuo Fujita
Publié dans: Journal of Manufacturing Systems, Numéro 54, 2020, Page(s) 336-347, ISSN 0278-6125
Éditeur: Elsevier BV
DOI: 10.1016/j.jmsy.2020.01.004

Vibration-based tool life monitoring for ceramics micro-cutting under various toolpath strategies (s’ouvre dans une nouvelle fenêtre)

Auteurs: Viharos, Z. J.; Móricz, L.; Büki, M. I.
Publié dans: ACTA IMEKO, 2021, ISSN 2221-870X
Éditeur: IMEKO
DOI: 10.21014/acta_imeko.v10i3.1063

Vibration Based Characterization of Tool Wearing in Micromilling of Ceramics during Waveform Toolpath (s’ouvre dans une nouvelle fenêtre)

Auteurs: László Móricz, Zsolt János Viharos
Publié dans: Gradus, 2022, ISSN 2064-8014
Éditeur: NJE
DOI: 10.47833/2022.1.eng.003

Predict the Effects of Forming Tool Characteristics on Surface Roughness of Aluminum Foil Components Formed by SPIF Using ANN and SVR (s’ouvre dans une nouvelle fenêtre)

Auteurs: Sherwan Mohammed Najm, Imre Paniti
Publié dans: International Journal of Precision Engineering and Manufacturing, 2021, ISSN 2234-7593
Éditeur: Springer
DOI: 10.1007/s12541-020-00434-5

Monitoring of orbital drilling process in CFRP based on digital image processing of characteristics of uncut fibres (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, György Póka, Csongor Pereszlai
Publié dans: Procedia CIRP, Numéro 85, 2019, Page(s) 165-170, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2019.09.011

Integrating maintenance strategies in autonomous production control using a cost-basedmodel (s’ouvre dans une nouvelle fenêtre)

Auteurs: Robert Glawar, Fazel Ansari, Kurt Matyas
Publié dans: ACTA IMEKO, 2021, ISSN 2221-870X
Éditeur: IMEKO
DOI: 10.21014/acta_imeko.v10i3.1070

Emerging Trends in Single Point Incremental Sheet Forming of Lightweight Metals (s’ouvre dans une nouvelle fenêtre)

Auteurs: Trzepieciński, T.; Oleksik, V.; Pepelnjak, T.; Najm, S.M.; Paniti, I.; Maji, K
Publié dans: Metals, 2021, ISSN 2075-4701
Éditeur: MDPI
DOI: 10.3390/met11081188

Layout configuration, maintenance planning and simulation of AGV based robotic assembly systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: István Németh, János Püspöki, Andor Bálint Viharos, Levente Zsóka, Benjámin Pirka
Publié dans: IFAC-PapersOnLine, Numéro 52/13, 2019, Page(s) 1626-1631, ISSN 2405-8963
Éditeur: IFAC
DOI: 10.1016/j.ifacol.2019.11.433

Comparative Analysis of Burrs in UD-CFRP Composites Using Advanced Hole Machining Technologies (s’ouvre dans une nouvelle fenêtre)

Auteurs: Anna Nikoletta Helle; Csongor Pereszlai; András Gödri; Norbert Geier
Publié dans: Hungarian Journal of Industry and Chemistry, 2022, ISSN 2450-5102
Éditeur: University of Pannonia
DOI: 10.33927/hjic-2021-21

Platform and direct exchange-based mechanisms for resource sharing in distributed manufacturing: a comparison (s’ouvre dans une nouvelle fenêtre)

Auteurs: Ádám Szaller, Botond Kádár
Publié dans: CIRP Annals, 2021, ISSN 2405-8963
Éditeur: Elsevier
DOI: 10.1016/j.cirp.2021.04.048

Investigation and machine learning-based prediction of parametric effects of single point incremental forming on pillow effect and wall profile of AlMn1Mg1 aluminum alloy sheets (s’ouvre dans une nouvelle fenêtre)

Auteurs: Sherwan Mohammed Najm and Imre Paniti
Publié dans: Journal of Intelligent Manufacturing, 2022, ISSN 1572-8145
Éditeur: Springer
DOI: 10.1007/s10845-022-02026-8

Lessons Learned from the COVID-19 Pandemic and Their Possible Consequences on Manufacturing (s’ouvre dans une nouvelle fenêtre)

Auteurs: László Monostori, József Váncza
Publié dans: Smart and Sustainable Manufacturing Systems, Numéro 4/3, 2020, Page(s) 20200063, ISSN 2520-6478
Éditeur: ASTM International
DOI: 10.1520/ssms20200063

Bilevel programming approach to demand response management with day-ahead tariff (s’ouvre dans une nouvelle fenêtre)

Auteurs: András KOVÁCS
Publié dans: Journal of Modern Power Systems and Clean Energy, Numéro 7/6, 2019, Page(s) 1632-1643, ISSN 2196-5625
Éditeur: Springer
DOI: 10.1007/s40565-019-0569-7

Microsecond measurement resolution for process cycle diagnostics of micro-EDM milling (s’ouvre dans une nouvelle fenêtre)

Auteurs: Viharos, Z. J.; Farkas, B. Zs
Publié dans: Measurement: Sensors, 2021, ISSN 2665-9174
Éditeur: Elsevier
DOI: 10.1016/j.measen.2021.100123

ADAPTIVE SCHEDULING THROUGH MACHINE LEARNING-BASED PROCESS PARAMETER PREDICTION (s’ouvre dans une nouvelle fenêtre)

Auteurs: M. Frye, D. Gyulai, J. Bergmann, R.H. Schmitt
Publié dans: MM Science Journal, Numéro 2019/04, 2019, Page(s) 3060-3066, ISSN 1803-1269
Éditeur: MM Publishing
DOI: 10.17973/mmsj.2019_11_2019051

Bio-inspired control of automated stem cell production (s’ouvre dans une nouvelle fenêtre)

Auteurs: Péter Egri, Balázs Cs. Csáji, Krisztián B. Kis, László Monostori, József Váncza, Jelena Ochs, Sven Jung, Niels König, Robert Schmitt, Christian Brecher, Simon Pieske, Stephan Wein
Publié dans: Procedia CIRP, Numéro 88, 2020, Page(s) 600-605, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2020.05.105

Experimental and Numerical Investigation of Single Point Incremental Forming of Aluminium Alloy Foils (s’ouvre dans une nouvelle fenêtre)

Auteurs: Imre Paniti, Zsolt János Viharos, Dóra Harangozó, Sherwan Mohammed Najm
Publié dans: ACTA IMEKO, Numéro 9/1, 2020, Page(s) 25, ISSN 2221-870X
Éditeur: IMEKO
DOI: 10.21014/acta_imeko.v9i1.750

A constraint model for assembly planning (s’ouvre dans une nouvelle fenêtre)

Auteurs: Csaba Kardos, András Kovács, József Váncza
Publié dans: Journal of Manufacturing Systems, Numéro 54, 2020, Page(s) 196-203, ISSN 0278-6125
Éditeur: Elsevier BV
DOI: 10.1016/j.jmsy.2019.11.007

Analysis of Characteristics of Surface Roughness of Machined CFRP Composites (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, Csongor Pereszlai
Publié dans: Periodica Polytechnica Mechanical Engineering, 2019, ISSN 0324-6051
Éditeur: Budapesti Muszaki es Gazdasagtudomanyi Egyetem/Budapest University of Technology and Economics
DOI: 10.3311/ppme.14436

A robust digital image processing method for measuring the planar burr length at milling (s’ouvre dans une nouvelle fenêtre)

Auteurs: György Póka, Barnabás Zoltán Balázs
Publié dans: Journal of Manufacturing Processes, 2022, ISSN 1526-6125
Éditeur: Elsevier BV
DOI: 10.1016/j.jmapro.2022.06.037

Reinforcement Learning for Statistical Process Control in Manufacturing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Viharos Z. J.; Jakab, R. B
Publié dans: Measurement, 2021, ISSN 0263-2241
Éditeur: Elsevier BV
DOI: 10.1016/j.measurement.2021.109616

From ethics to standards – A path via responsible AI to cyber-physical production systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Mezgár, I., Váncza J
Publié dans: Annual Reviews in Control, 2022, ISSN 1367-5788
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.arcontrol.2022.04.002

Study on Effecting Parameters of Flat and Hemispherical end Tools in SPIF of Aluminium Foils (s’ouvre dans une nouvelle fenêtre)

Auteurs: Najm, S. M.; Paniti, I
Publié dans: Tehnički vjesnik, 2021, ISSN 1848-6339
Éditeur: Hrčak
DOI: 10.17559/tv-20190513181910

Analysis and modelling of thrust force in drilling of basalt and carbon fibre reinforced polymer (BFRP and CFRP) composites. (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gergely Magyar, Norbert Geier
Publié dans: Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, ISSN 1678-4820
Éditeur: Springer
DOI: 10.1007/s40430-023-04241-7

Carbon fibre detection in polymer composites reinforced by chopped carbon fibres through digital image processing and machine learning (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert GEIER, Gergely MAGYAR, Jakob GINER, Tamás LUKÁCS, György PÓKA
Publié dans: Journal of Composite Materials, 2024, ISSN 0021-9983
Éditeur: SAGE Publications
DOI: 10.1177/00219983241268861

Vibration based characterization of tool wearing in micro-milling of ceramics (s’ouvre dans une nouvelle fenêtre)

Auteurs: Móricz, L.; Viharos, Z. J
Publié dans: Measurement: sensors, 2021, ISSN 2665-9174
Éditeur: Elsevier
DOI: 10.1016/j.measen.2021.100174

A Reference Architecture enabling Sensor Networks based on homogeneous AASs (s’ouvre dans une nouvelle fenêtre)

Auteurs: V. Gowtham, A. Willner, W. Pilar von Pilchau, J. Hähner, M. Riedl, N.-S. Koutrakis, J. Polte, E. Uhlmann, J. Tayub, V. Frey
Publié dans: Automation, 2021, ISSN 2450-5102
Éditeur: VDI
DOI: 10.51202/9783181023921-5

Mechanical Deburring of Drilling-Induced Exit Burrs in Carbon Fibre Reinforced Polymer Composites (s’ouvre dans une nouvelle fenêtre)

Auteurs: András Gödri; Anna Nikoletta Helle
Publié dans: Hungarian Journal of Industry and Chemistry, 2022, ISSN 2450-5102
Éditeur: University of Pannonia
DOI: 10.33927/hjic-2021-20

Episodes of Robotics and Manufacturing Automation Achievements from the Past Decades and Vision for the Next Decade (s’ouvre dans une nouvelle fenêtre)

Auteurs: Geza Haidegger, Imre Paniti
Publié dans: Acta Polytechnica Hungarica, Numéro 16/10, 2019, Page(s) 119-136, ISSN 1785-8860
Éditeur: Obuda University
DOI: 10.12700/aph.16.10.2019.10.8

Recent advances in learning content and infrastructure development for layout and process planning courses at the SZTAKI learning factories (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zsolt Kemény, Richárd Beregi, Bence Tipary, Kristóf Abai, János Nacsa
Publié dans: Procedia Manufacturing, Numéro 45, 2020, Page(s) 319-324, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2020.04.024

Decomposition approach to optimal feature-based assembly planning (s’ouvre dans une nouvelle fenêtre)

Auteurs: Csaba Kardos, András Kovács, József Váncza
Publié dans: CIRP Annals, Numéro 66/1, 2017, Page(s) 417-420, ISSN 0007-8506
Éditeur: Hallwag AG
DOI: 10.1016/j.cirp.2017.04.002

Human–robot collaborative assembly in cyber-physical production: Classification framework and implementation (s’ouvre dans une nouvelle fenêtre)

Auteurs: Xi Vincent Wang, Zsolt Kemény, József Váncza, Lihui Wang
Publié dans: CIRP Annals, Numéro 66/1, 2017, Page(s) 5-8, ISSN 0007-8506
Éditeur: Hallwag AG
DOI: 10.1016/j.cirp.2017.04.101

Simulation model study for manufacturing effectiveness evaluation in crowdsourced manufacturing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Toshiya Kaihara, Yoshiteru Katsumura, Yuuichi Suginishi, Botond Kadar
Publié dans: CIRP Annals, Numéro 66/1, 2017, Page(s) 445-448, ISSN 0007-8506
Éditeur: Hallwag AG
DOI: 10.1016/j.cirp.2017.04.094

Optimisation of process parameters for the orbital and conventional drilling of uni-directional carbon fibre-reinforced polymers (UD-CFRP) (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, Tibor Szalay
Publié dans: Measurement, Numéro 110, 2017, Page(s) 319-334, ISSN 0263-2241
Éditeur: Elsevier BV
DOI: 10.1016/j.measurement.2017.07.007

The Influence of the Machining Parameters on the Quality of the Holes Made by μEDM in Electrically Conductive Alumina-Oxide (s’ouvre dans une nouvelle fenêtre)

Auteurs: Balázs Zsolt Farkas, László Csorba, Tibor Szalay, Valery V. Kuzin, Sergei Yu. Fedorov
Publié dans: Solid State Phenomena, Numéro 261, 2017, Page(s) 101-107, ISSN 1662-9779
Éditeur: Scientific.net
DOI: 10.4028/www.scientific.net/SSP.261.101

A discrete simulation-based algorithm for the technological investigation of 2.5D milling operations (s’ouvre dans une nouvelle fenêtre)

Auteurs: Adam Jacso, Tibor Szalay, Juan Carlos Jauregui, Juvenal Rodriguez Resendiz
Publié dans: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018, Page(s) 095440621875726, ISSN 0954-4062
Éditeur: Professional Engineering Publishing Ltd.
DOI: 10.1177/0954406218757267

CONCEPTION AN INTELLIGENT NODE ARCHITECTURE FOR INTRALOGISTICS (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gábor Bohács, Dániel Gáspár, Dorina Kánya
Publié dans: Acta logistica, Numéro 5/2, 2018, Page(s) 31-37, ISSN 1339-5629
Éditeur: 4S go, s.r.o.
DOI: 10.22306/al.v5i2.82

Lead time prediction using machine learning algorithms: A case study by a semiconductor manufacturer (s’ouvre dans une nouvelle fenêtre)

Auteurs: Lukas Lingitz, Viola Gallina, Fazel Ansari, Dávid Gyulai, András Pfeiffer, Wilfried Sihn, László Monostori
Publié dans: Procedia CIRP, Numéro 72, 2018, Page(s) 1051-1056, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2018.03.148

An Approach for the Integration of Anticipative Maintenance Strategies within a Production Planning and Control Model (s’ouvre dans une nouvelle fenêtre)

Auteurs: Robert Glawar, Matthias Karner, Tanja Nemeth, Kurt Matyas, Wilfried Sihn
Publié dans: Procedia CIRP, Numéro 67, 2018, Page(s) 46-51, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2017.12.174

Supply chains robustness: Challenges and opportunities (s’ouvre dans une nouvelle fenêtre)

Auteurs: Judit Monostori
Publié dans: Procedia CIRP, Numéro 67, 2018, Page(s) 110-115, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2017.12.185

Cyber-physical Manufacturing in the Light of Professor Kanji Ueda's Legacy (s’ouvre dans une nouvelle fenêtre)

Auteurs: József Váncza, László Monostori
Publié dans: Procedia CIRP, Numéro 63, 2017, Page(s) 631-638, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2017.04.059

Application of Generic CAD Models for Supporting Feature Based Assembly Process Planning (s’ouvre dans une nouvelle fenêtre)

Auteurs: Csaba Kardos, József Váncza
Publié dans: Procedia CIRP, Numéro 67, 2018, Page(s) 446-451, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2017.12.240

PriMa: a prescriptive maintenance model for cyber-physical production systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Fazel Ansari, Robert Glawar, Tanja Nemeth
Publié dans: International Journal of Computer Integrated Manufacturing, Numéro 32/4-5, 2019, Page(s) 482-503, ISSN 0951-192X
Éditeur: Taylor & Francis
DOI: 10.1080/0951192x.2019.1571236

Towards joint optimization of product design, process planning and production planning in multi-product assembly (s’ouvre dans une nouvelle fenêtre)

Auteurs: Daisuke Tsutsumi, Dávid Gyulai, András Kovács, Bence Tipary, Yumiko Ueno, Youichi Nonaka, László Monostori
Publié dans: CIRP Annals, Numéro 67/1, 2018, Page(s) 441-446, ISSN 0007-8506
Éditeur: Hallwag AG
DOI: 10.1016/j.cirp.2018.04.036

Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, Tibor Szalay, Márton Takács
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 100/9-12, 2019, Page(s) 3139-3154, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-018-2895-8

Evaluation, ranking and positioning of measurement methods for pellet production (s’ouvre dans une nouvelle fenêtre)

Auteurs: K. Konrád, Zs.J. Viharos, G. Németh
Publié dans: Measurement, Numéro 124, 2018, Page(s) 568-574, ISSN 0263-2241
Éditeur: Elsevier BV
DOI: 10.1016/j.measurement.2017.12.036

Determination of the working gap and optimal machining parameters for magnetic assisted ball burnishing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zsolt F. Kovács, Zsolt J. Viharos, János Kodácsy
Publié dans: Measurement, Numéro 118, 2018, Page(s) 172-180, ISSN 0263-2241
Éditeur: Elsevier BV
DOI: 10.1016/j.measurement.2018.01.033

Heterogeneous string stability of unidirectionally interconnected MIMO LTI systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Gábor Rödönyi
Publié dans: Automatica, Numéro 103, 2019, Page(s) 354-362, ISSN 0005-1098
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.automatica.2019.02.015

Computational method for estimating the domain of attraction of discrete-time uncertain rational systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Péter Polcz, Tamás Péni, Gábor Szederkényi
Publié dans: European Journal of Control, Numéro 49, 2019, Page(s) 68-83, ISSN 0947-3580
Éditeur: Lavoisier
DOI: 10.1016/j.ejcon.2018.12.004

The fast constant engagement offsetting method for generating milling tool paths (s’ouvre dans une nouvelle fenêtre)

Auteurs: Adam Jacso, Gyula Matyasi, Tibor Szalay
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 103/9-12, 2019, Page(s) 4293-4305, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-019-03834-8

The effect of radial rake angle on chip thickness in the case of face milling (s’ouvre dans une nouvelle fenêtre)

Auteurs: György Póka, István Németh
Publié dans: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2019, Page(s) 095440541984924, ISSN 0954-4054
Éditeur: Professional Engineering Publishing Ltd.
DOI: 10.1177/0954405419849245

Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, J. Paulo Davim, Tibor Szalay
Publié dans: Composites Part A: Applied Science and Manufacturing, Numéro 125, 2019, Page(s) 105552, ISSN 1359-835X
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105552

Smart Cyber-Physical System applications in production and logistics: special issue editorial (s’ouvre dans une nouvelle fenêtre)

Auteurs: Elisabeth Ilie-Zudor, Davy Preuveneers, Anikó Ekárt, Eckhard Hohwieler
Publié dans: International Journal of Computer Integrated Manufacturing, Numéro 32/4-5, 2019, Page(s) 327-328, ISSN 0951-192X
Éditeur: Taylor & Francis
DOI: 10.1080/0951192x.2019.1616152

Roadmapping towards industrial digitalization based on an Industry 4.0 maturity model for manufacturing enterprises (s’ouvre dans une nouvelle fenêtre)

Auteurs: Andreas Schumacher, Tanja Nemeth, Wilfried Sihn
Publié dans: Procedia CIRP, Numéro 79, 2019, Page(s) 409-414, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2019.02.110

Conceptual Design of an Integrated Autonomous Production Control Model in association with a Prescriptive Maintenance Model (PriMa) (s’ouvre dans une nouvelle fenêtre)

Auteurs: Robert Glawar, Fazel Ansari, Csaba Kardos, Kurt Matyas, Wilfried Sihn
Publié dans: Procedia CIRP, Numéro 80, 2019, Page(s) 482-487, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2019.01.047

The effects of machining strategies of magnetic assisted roller burnishing on the resulted surface structure (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zsolt Kovács, Zsolt János Viharos, János Kodácsy
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 448, 2018, Page(s) 012002, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012002

Effect of cutting parameters on section borders of the empirical specific cutting force model for cutting with micro-sized uncut chip thickness (s’ouvre dans une nouvelle fenêtre)

Auteurs: István Biró, Tibor Szalay, Norbert Geier
Publié dans: Procedia CIRP, Numéro 77, 2018, Page(s) 279-282, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2018.09.015

Trochoid milling of carbon fibre-reinforced plastics (CFRP) (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, Tibor Szalay, István Biró
Publié dans: Procedia CIRP, Numéro 77, 2018, Page(s) 375-378, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2018.09.039

Experimental Investigation on the Single Point Incremental Forming of AlMn1Mg1 Foils using Flat End Tools (s’ouvre dans une nouvelle fenêtre)

Auteurs: Sherwan M. Najm, Imre Paniti
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 448, 2018, Page(s) 012032, ISSN 1757-899X
Éditeur: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012032

Indirect measurement and diagnostics of the tool wear for ceramics micro-milling optimisation (s’ouvre dans une nouvelle fenêtre)

Auteurs: L Móricz, Zs J Viharos, A Németh, A Szépligeti
Publié dans: Journal of Physics: Conference Series, Numéro 1065/10, 2018, Page(s) 102003, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/1065/10/102003

Annihilator design for linear parameter varying systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Z. Szabó, T. Péni, J. Bokor
Publié dans: IFAC-PapersOnLine, Numéro 51/24, 2018, Page(s) 1185-1192, ISSN 2405-8963
Éditeur: Elsevier
DOI: 10.1016/j.ifacol.2018.09.701

Design of the optimal motions of autonomous vehicles in intersections through neural networks (s’ouvre dans une nouvelle fenêtre)

Auteurs: Balázs Németh, Péter Gáspár, Dávid Szőcs, András Mihály
Publié dans: IFAC-PapersOnLine, Numéro 51/9, 2018, Page(s) 19-24, ISSN 2405-8963
Éditeur: Elsevier
DOI: 10.1016/j.ifacol.2018.07.004

Detection filter design for homogeneous multi-agent networks (s’ouvre dans une nouvelle fenêtre)

Auteurs: Z. Szabó, J. Bokor, S. Hara
Publié dans: IFAC-PapersOnLine, Numéro 51/24, 2018, Page(s) 586-591, ISSN 2405-8963
Éditeur: Elsevier
DOI: 10.1016/j.ifacol.2018.09.635

Transformations for linear parameter varying systems (s’ouvre dans une nouvelle fenêtre)

Auteurs: Z. Szabó, J. Bokor
Publié dans: IFAC-PapersOnLine, Numéro 51/26, 2018, Page(s) 87-93, ISSN 2405-8963
Éditeur: Elsevier
DOI: 10.1016/j.ifacol.2018.11.163

Physical Internet – a Novel Application Area for Industry 4.0

Auteurs: Puskas, Eszter; Bohács, Gábor
Publié dans: International Journal of Engineering and Management Sciences, Numéro 4, 2019, Page(s) 152-161, ISSN 2229-600x
Éditeur: Society for Science and Nature

Drilling fibre reinforced polymer composites (CFRP and GFRP): An analysis of the cutting force of the tilted helical milling process (s’ouvre dans une nouvelle fenêtre)

Auteurs: CsongorPereszlai, NorbertGeier, stvánPoór, Barnabás Zoltán, BalázsGyörgyPóka
Publié dans: Composite Structures, 2021, ISSN 0263-8223
Éditeur: Elsevier BV
DOI: 10.1016/j.compstruct.2021.113646

Improvements of surface tribological properties by magnetic assisted ball burnishing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Zsolt F.Kovács, Zsolt J.Viharosa, JánosKodácsy
Publié dans: Surface and Coatings Technology, 2022, ISSN 0257-8972
Éditeur: Elsevier BV
DOI: 10.1016/j.surfcoat.2022.128317

Industry 4.0 readiness in manufacturing: Company Compass 2.0, a renewed framework and solution for Industry 4.0 maturity assessment (s’ouvre dans une nouvelle fenêtre)

Auteurs: Nick, Kádár
Publié dans: Procedia Manufacturing, 2021, ISSN 2351-9789
Éditeur: Elsevier
DOI: 10.1016/j.promfg.2021.07.007

An Online Toolkit for Applications Featuring Collaborative Robots Across Different Domains (s’ouvre dans une nouvelle fenêtre)

Auteurs: Saenz, José; Bessler-Etten, Jule; Valori, Marcello; Prange-Lasonder, Gerdienke B.; Fassi, Irene; Bidard, Catherine; Lassen, Aske Bach; Paniti, Imre; Toth,Andras; Stuke, Tobias; Wrede, Sebastian; Nielsen, Kurt
Publié dans: IEEE Transactions on Human-Machine Systems, 2023, ISSN 2168-2291
Éditeur: IEEE Systems, Man, and Cybernetics Society
DOI: 10.1109/thms.2022.10

Machine Learning Approach for Degradation Path Prediction Using Different Models and Architectures of Artificial Neural Networks (s’ouvre dans une nouvelle fenêtre)

Auteurs: Basheer Shaheen, István Németh
Publié dans: Periodica Polytechnica Mechanical Engineering, 2022, ISSN 0324-6051
Éditeur: Budapesti Muszaki es Gazdasagtudomanyi Egyetem/Budapest University of Technology and Economics
DOI: 10.3311/ppme.20145

Poisson Equations, Lipschitz Continuity and Controlled Queues. (s’ouvre dans une nouvelle fenêtre)

Auteurs: Carè A., Csáji B. Cs., Gerencsér B., Gerencsér L., Rásonyi M
Publié dans: IEEE Transactions on Automatic Control, 2022, ISSN 0018-9286
Éditeur: Institute of Electrical and Electronics Engineers
DOI: 10.48550/arxiv.1906.09464

Beyond the profit motive: Environmentally conscious (re)design of supply chain structures (s’ouvre dans une nouvelle fenêtre)

Auteurs: Judit Monostori
Publié dans: Procedia CIRP, Numéro 93, 2020, Page(s) 808-813, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2020.03.033

Generative Künstliche Intelligenz - Neue Horizonte für das Technologiemanagement? (s’ouvre dans une nouvelle fenêtre)

Auteurs: Günther Schuh , Leonard Cassel, Bastian Thanhäuser, Thomas Scheuer
Publié dans: Industry 4.0 Science, 2024, ISSN 2942-6170
Éditeur: Industry 4.0 Science
DOI: 10.30844/i4sd.24.3.6

The Actigraphy-Based Identification of Premorbid Latent Liability of Schizophrenia and Bipolar Disorder (s’ouvre dans une nouvelle fenêtre)

Auteurs: Ádám Nagy ,József Dombi ,Martin Patrik Fülep ,Emese Rudics ,Emőke Adrienn Hompoth ,Zoltán Szabó ,András Dér ,András Búzás ,Zsolt János Viharos ,Anh Tuan Hoang ,Bálint Maczák ,Gergely Vadai ,Zoltán Gingl ,Szandra László ,Vilmos Bilicki, István Szendi
Publié dans: MDPI, 2022, ISSN 2078-2489
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s23020958

A mutualistic framework for sustainable capacity sharing in manufacturing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Ádám Szaller, Gianfranco Pedone, Péter Egri, Ádám Szalóki, Gábor Nick
Publié dans: Procedia CIRP, Numéro 93, 2020, Page(s) 938-943, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2020.04.024

A stochastic approach to calculate assembly cycle times based on spatial shop-floor data stream (s’ouvre dans une nouvelle fenêtre)

Auteurs: Júlia Bergmann, Dávid Gyulai, Dávid Morassi, József Váncza
Publié dans: Procedia CIRP, Numéro 93, 2020, Page(s) 1164-1169, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2020.03.052

Allocating raw materials to competing projects (s’ouvre dans une nouvelle fenêtre)

Auteurs: Peter Egri, Tamás Kis
Publié dans: Computers & Industrial Engineering, Numéro 143, 2020, Page(s) 106386, ISSN 0360-8352
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.cie.2020.106386

A drilling case study in polymer composites reinforced by virgin and recycled carbon fibres (CFRP and rCFRP) to analyse thrust force and torque (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier, Dániel István Poór, Csongor Pereszlai, Péter Tamás-Bényei, Jinyang Xu
Publié dans: The International Journal of Advanced Manufacturing Technology, 2022, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-022-08947-1

Influence of fibre orientation on cutting force in up and down milling of UD-CFRP composites (s’ouvre dans une nouvelle fenêtre)

Auteurs: Norbert Geier
Publié dans: The International Journal of Advanced Manufacturing Technology, Numéro 111/3-4, 2020, Page(s) 881-893, ISSN 0268-3768
Éditeur: Springer Verlag
DOI: 10.1007/s00170-020-06163-3

Effect of lead time prediction accuracy in trust-based resource sharing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Ádám Szaller, Botond Kádár
Publié dans: IFAC, 2021, ISSN 2405-8963
Éditeur: Elsevier
DOI: 10.1016/j.ifacol.2021.08.132

Flexible Automatisierung mit Virtuellen Agenten (s’ouvre dans une nouvelle fenêtre)

Auteurs: E. Uhlmann, J. Polte, C. Mühlich, K. Lindow, J. Harrendorf
Publié dans: wt Werkstattstechnik online, 2022, ISSN 1436-4980
Éditeur: VDI Fachmedien
DOI: 10.37544/1436-4980-2022-07-08-30

Improving the Planning Quality in Practice with Artificial Intelligence (s’ouvre dans une nouvelle fenêtre)

Auteurs: Czarnetzki, L; Karnok, Dávid; Breitschopf, J; Karner, M; Gashi, M
Publié dans: Numéro 1, 2023
Éditeur: IMEKO
DOI: 10.21014/tc10-2023.004

Engineering Support Systems for Industrial Machines and Plants (s’ouvre dans une nouvelle fenêtre)

Auteurs: Youichi Nonaka, Takahiro Nakano, Kenji Ohya, Atsuko Enomoto, Gábor Erdős, Gergely Horváth, József Váncza
Publié dans: Advances in Through-life Engineering Services, 2017, Page(s) 199-220, ISBN 978-3-319-49938-3
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-49938-3_13

A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance (s’ouvre dans une nouvelle fenêtre)

Auteurs: Klaudia Kovacs, Fazel Ansari, Claudio Geisert, Eckart Uhlmann, Robert Glawar, Wilfried Sihn
Publié dans: Machine Learning for Cyber Physical Systems - Selected papers from the International Conference ML4CPS 2018, Numéro 9, 2019, Page(s) 87-96, ISBN 978-3-662-58484-2
Éditeur: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-58485-9_10

Machinability analysis of carbon fibre-reinforced plastics using compression tools

Auteurs: Somoskői B., Geiger N.
Publié dans: Bánki Közlemények, Numéro 1(3), 5-10, 2018, 2018, Page(s) 5-10
Éditeur: Bánki Közlemények

Proceedings of the 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”.

Auteurs: Viharos, Zs. J.; Ciani, L.; Bilski, P.; Jakovcic, M
Publié dans: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, ISBN 978-92-990084-6-1
Éditeur: IMEKO

Recherche de données OpenAIRE...

Une erreur s’est produite lors de la recherche de données OpenAIRE

Aucun résultat disponible

Mon livret 0 0