Centre of Excellence in Production Informatics and Control

Rezultaty

Design and publishing of the project’s official web-site and local partner web-sites

The project’s official web-site is to be the linking point between EPIC partners and outer communities. The essential principle for the site development is the requirement to be content rich, up-to-date, easy to navigate. An Intraweb facility for sharing of internal documents by consortium members will be provided as well. In addition, each partner will have a web page on its local server containing an overview of the project and linked to the project’s official site.Updates will follow the project evolution.

Project Leaflet

The task covers preparing leaflets as dissemination materials, with updates taking into account project progress. The goal of the task is to reach a (geographically and by sectors) wide range of stakeholders, both to disseminate project results and favour cross-fertilization.

EPIC Flipboard Magazine

An online digest of current EPIC topic related developments will be created using the Flipboard (flipboard.com) social-network aggregation, magazine-format application software. The EPIC Flipboard magazine will integrate scientific and technological news and articles from both the consortium and media outlets from around the world and present them in a digital magazine format where pages can be “flipped”. First version will be available M6, while regular updates will follow during the whole project period.

Digital Learning CPPS-Toolbox

The task aims to demonstrate to the manufacturing and logistics industry how they can improve their processes by implementing novel CPP strategies by Providing industrial examples Sharing success stories Good Practices Providing training objects which can help to think differently Providing elements Focused on SME to guide a company in such a strategic processTherefore a Digital Learning CPPSToolbox is developed based on the specific needs of the target market derived in T61 Once the Digital Learning CPPSToolbox is launched the Project partners will continuously fill this Toolbox with content and share it with the targeting market The content of this Digital Learning CPPSToolbox will be compatible with smart phones and digital tablets to improve the usability and raise excitement

Publikacje

Towards a connected factory: Shop-floor data analytics in cyber-physical environments

Autorzy: Dávid Gyulai, Júlia Bergmann, Viola Gallina, Alexander Gaal
Opublikowane w: Procedia CIRP, Numer 86, 2019, Strona(/y) 37-42, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2020.01.016

Optimizing the numerical algorithm in Fast Constant Engagement Offsetting Method for generating 2.5D milling tool paths

Autorzy: Adam Jacso, Tibor Szalay
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 108/7-8, 2020, Strona(/y) 2285-2300, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-020-05452-1

Human-robot collision predictor for flexible assembly

Autorzy: Imre Paniti, János Nacsa, Péter Kovács, Dávid Szur
Opublikowane w: ACTA IMEKO, 2021, ISSN 2221-870X
Wydawca: IMEKO
DOI: 10.21014/acta_imeko.v10i3.1072

Defining the Intelligent Manufacturing Enterprise

Autorzy: Günther Schuh, Thomas Scheuer, Riley Colleen Padovano
Opublikowane w: Journal of Production Systems and Logistics, 2022, ISSN 2702-2587
Wydawca: Hannover : publish-Ing.
DOI: 10.15488/11731

Surface flatness and roughness evolution after magnetic assisted ball burnishing of magnetizable and non-magnetizable materials

Autorzy: Zsolt F. Kovács, Zsolt J. Viharos, János Kodácsy
Opublikowane w: Measurement, Numer 158, 2020, Strona(/y) 107750, ISSN 0263-2241
Wydawca: Elsevier BV
DOI: 10.1016/j.measurement.2020.107750

Recent Developments and Future Challenges in Incremental Sheet Forming of Aluminium and Aluminium Alloy Sheets

Autorzy: Trzepieciński, T; Najm, S M ; Oleksik, V ; Vasilca, D ; Paniti, I ; Szpunar, M
Opublikowane w: Metals, 2022, ISSN 2075-4701
Wydawca: MPDI
DOI: 10.3390/met12010124

Complementary Manipulator Tool Development for Safe Cobot-Assisted Hydroponics

Autorzy: Imre Paniti, János Nacsa, Dávid Szűr, Sándor Rácz, József Tóth
Opublikowane w: Hungarian Journal of Industry and Chemistry, 2021, ISSN 2450-5102
Wydawca: University of Pannonia
DOI: 10.33927/hjic-2021-27

Off-line geometrical and microscopic & on-line vibration based cutting tool wear analysis for micro-milling of ceramics

Autorzy: László Móricz, Zsolt J. Viharos, András Németh, András Szépligeti, Máté Büki
Opublikowane w: Measurement, Numer 163, 2020, Strona(/y) 108025, ISSN 0263-2241
Wydawca: Elsevier BV
DOI: 10.1016/j.measurement.2020.108025

A critical review of the drilling of CFRP composites: Burr formation, characterisation and challenges

Autorzy: Dániel István Poór, Norbert Geier, Csongor Pereszlai, Jinyang Xu
Opublikowane w: Composites Part B: Engineering, 2022, ISSN 1359-8368
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2021.109155

Parametric Effects of Single Point Incremental Forming on Hardness of AA1100 Aluminium Alloy Sheets

Autorzy: Najm, S.M.; Paniti, I.; Trzepieciński, T.; Nama, S.A.; Viharos, Z.J.; Jacso, A
Opublikowane w: Materials, 2021, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma14237263

Adaptive network analytics for managing complex shop-floor logistics systems

Autorzy: Dávid Gyulai, Júlia Bergmann, József Váncza
Opublikowane w: CIRP Annals, Numer 69/1, 2020, Strona(/y) 393-396, ISSN 0007-8506
Wydawca: Hallwag AG
DOI: 10.1016/j.cirp.2020.04.002

The examination of the effect of variable cutting speeds on the surface and edge qualities of milled granite materials

Autorzy: István Gábor Gyurika, Tibor Szalay
Opublikowane w: Advances in Mechanical Engineering, Numer 11/7, 2019, Strona(/y) 168781401983631, ISSN 1687-8140
Wydawca: Sage Journals
DOI: 10.1177/1687814019836319

Artificial neural network for modeling and investigating the effects of forming tool characteristics on the accuracy and formability of thin aluminum alloy blanks when using SPIF

Autorzy: Sherwan Mohammed Najm, Imre Paniti
Opublikowane w: The International Journal of Advanced Manufacturing Technology, 2021, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-021-06712-4

Comparative analysis of wobble milling, helical milling and conventional drilling of CFRPs

Autorzy: Csongor Pereszlai, Norbert Geier
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 106/9-10, 2020, Strona(/y) 3913-3930, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-019-04842-4

Adaptive, Hybrid Feature Selection (AHFS)

Autorzy: Viharos
Opublikowane w: Pattern Recognition, 2021, ISSN 0031-3203
Wydawca: Pergamon Press
DOI: 10.1016/j.patcog.2021.107932

Evaluationof Economic Plausibility of Integrating Maintenance Strategies in Autonomous ProductionControl: A Case Study in Automotive Industry

Autorzy: Robert Glawar, Fazel Ansari, Zsolt János Viharos, Kurt Matyas, Wilfried Sihn
Opublikowane w: 17th IFAC Symposium on Information Control Problems in Manufacturing, 2021, ISSN 2405-8963
Wydawca: IFAC
DOI: 10.1016/j.ifacol.2021.08.075

Drilling of recycled carbon fibre–reinforced polymer (rCFRP) composites: analysis of burrs and microstructure

Autorzy: Norbert Geier, Dániel István Poór, Csongor Pereszlai, Péter Tamás-Bényei
Opublikowane w: The International Journal of Advanced Manufacturing Technology, 2022, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-022-08847-4

Joint optimization of product tolerance design, process plan, and production plan in high-precision multi-product assembly

Autorzy: Daisuke Tsutsumi, Dávid Gyulai, András Kovács, Bence Tipary, Yumiko Ueno, Youichi Nonaka, Kikuo Fujita
Opublikowane w: Journal of Manufacturing Systems, Numer 54, 2020, Strona(/y) 336-347, ISSN 0278-6125
Wydawca: Elsevier BV
DOI: 10.1016/j.jmsy.2020.01.004

Vibration-based tool life monitoring for ceramics micro-cutting under various toolpath strategies

Autorzy: Viharos, Z. J.; Móricz, L.; Büki, M. I.
Opublikowane w: ACTA IMEKO, 2021, ISSN 2221-870X
Wydawca: IMEKO
DOI: 10.21014/acta_imeko.v10i3.1063

Vibration Based Characterization of Tool Wearing in Micromilling of Ceramics during Waveform Toolpath

Autorzy: László Móricz, Zsolt János Viharos
Opublikowane w: Gradus, 2022, ISSN 2064-8014
Wydawca: NJE
DOI: 10.47833/2022.1.eng.003

Predict the Effects of Forming Tool Characteristics on Surface Roughness of Aluminum Foil Components Formed by SPIF Using ANN and SVR

Autorzy: Sherwan Mohammed Najm, Imre Paniti
Opublikowane w: International Journal of Precision Engineering and Manufacturing, 2021, ISSN 2234-7593
Wydawca: Springer
DOI: 10.1007/s12541-020-00434-5

Monitoring of orbital drilling process in CFRP based on digital image processing of characteristics of uncut fibres

Autorzy: Norbert Geier, György Póka, Csongor Pereszlai
Opublikowane w: Procedia CIRP, Numer 85, 2019, Strona(/y) 165-170, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2019.09.011

Integrating maintenance strategies in autonomous production control using a cost-basedmodel

Autorzy: Robert Glawar, Fazel Ansari, Kurt Matyas
Opublikowane w: ACTA IMEKO, 2021, ISSN 2221-870X
Wydawca: IMEKO
DOI: 10.21014/acta_imeko.v10i3.1070

Emerging Trends in Single Point Incremental Sheet Forming of Lightweight Metals

Autorzy: Trzepieciński, T.; Oleksik, V.; Pepelnjak, T.; Najm, S.M.; Paniti, I.; Maji, K
Opublikowane w: Metals, 2021, ISSN 2075-4701
Wydawca: MDPI
DOI: 10.3390/met11081188

Layout configuration, maintenance planning and simulation of AGV based robotic assembly systems

Autorzy: István Németh, János Püspöki, Andor Bálint Viharos, Levente Zsóka, Benjámin Pirka
Opublikowane w: IFAC-PapersOnLine, Numer 52/13, 2019, Strona(/y) 1626-1631, ISSN 2405-8963
Wydawca: IFAC
DOI: 10.1016/j.ifacol.2019.11.433

Comparative Analysis of Burrs in UD-CFRP Composites Using Advanced Hole Machining Technologies

Autorzy: Anna Nikoletta Helle; Csongor Pereszlai; András Gödri; Norbert Geier
Opublikowane w: Hungarian Journal of Industry and Chemistry, 2022, ISSN 2450-5102
Wydawca: University of Pannonia
DOI: 10.33927/hjic-2021-21

Platform and direct exchange-based mechanisms for resource sharing in distributed manufacturing: a comparison

Autorzy: Ádám Szaller, Botond Kádár
Opublikowane w: CIRP Annals, 2021, ISSN 2405-8963
Wydawca: Elsevier
DOI: 10.1016/j.cirp.2021.04.048

Lessons Learned from the COVID-19 Pandemic and Their Possible Consequences on Manufacturing

Autorzy: László Monostori, József Váncza
Opublikowane w: Smart and Sustainable Manufacturing Systems, Numer 4/3, 2020, Strona(/y) 20200063, ISSN 2520-6478
Wydawca: ASTM International
DOI: 10.1520/ssms20200063

Bilevel programming approach to demand response management with day-ahead tariff

Autorzy: András KOVÁCS
Opublikowane w: Journal of Modern Power Systems and Clean Energy, Numer 7/6, 2019, Strona(/y) 1632-1643, ISSN 2196-5625
Wydawca: Springer
DOI: 10.1007/s40565-019-0569-7

Microsecond measurement resolution for process cycle diagnostics of micro-EDM milling

Autorzy: Viharos, Z. J.; Farkas, B. Zs
Opublikowane w: Measurement: Sensors, 2021, ISSN 2665-9174
Wydawca: Elsevier
DOI: 10.1016/j.measen.2021.100123

ADAPTIVE SCHEDULING THROUGH MACHINE LEARNING-BASED PROCESS PARAMETER PREDICTION

Autorzy: M. Frye, D. Gyulai, J. Bergmann, R.H. Schmitt
Opublikowane w: MM Science Journal, Numer 2019/04, 2019, Strona(/y) 3060-3066, ISSN 1803-1269
Wydawca: MM Publishing
DOI: 10.17973/mmsj.2019_11_2019051

Bio-inspired control of automated stem cell production

Autorzy: Péter Egri, Balázs Cs. Csáji, Krisztián B. Kis, László Monostori, József Váncza, Jelena Ochs, Sven Jung, Niels König, Robert Schmitt, Christian Brecher, Simon Pieske, Stephan Wein
Opublikowane w: Procedia CIRP, Numer 88, 2020, Strona(/y) 600-605, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2020.05.105

Experimental and Numerical Investigation of Single Point Incremental Forming of Aluminium Alloy Foils

Autorzy: Imre Paniti, Zsolt János Viharos, Dóra Harangozó, Sherwan Mohammed Najm
Opublikowane w: ACTA IMEKO, Numer 9/1, 2020, Strona(/y) 25, ISSN 2221-870X
Wydawca: IMEKO
DOI: 10.21014/acta_imeko.v9i1.750

A constraint model for assembly planning

Autorzy: Csaba Kardos, András Kovács, József Váncza
Opublikowane w: Journal of Manufacturing Systems, Numer 54, 2020, Strona(/y) 196-203, ISSN 0278-6125
Wydawca: Elsevier BV
DOI: 10.1016/j.jmsy.2019.11.007

Reinforcement Learning for Statistical Process Control in Manufacturing

Autorzy: Viharos Z. J.; Jakab, R. B
Opublikowane w: Measurement, 2021, ISSN 0263-2241
Wydawca: Elsevier BV
DOI: 10.1016/j.measurement.2021.109616

Study on Effecting Parameters of Flat and Hemispherical end Tools in SPIF of Aluminium Foils

Autorzy: Najm, S. M.; Paniti, I
Opublikowane w: Tehnički vjesnik, 2021, ISSN 1848-6339
Wydawca: Hrčak
DOI: 10.17559/tv-20190513181910

Vibration based characterization of tool wearing in micro-milling of ceramics

Autorzy: Móricz, L.; Viharos, Z. J
Opublikowane w: Measurement: sensors, 2021, ISSN 2665-9174
Wydawca: Elsevier
DOI: 10.1016/j.measen.2021.100174

A Reference Architecture enabling Sensor Networks based on homogeneous AASs

Autorzy: V. Gowtham, A. Willner, W. Pilar von Pilchau, J. Hähner, M. Riedl, N.-S. Koutrakis, J. Polte, E. Uhlmann, J. Tayub, V. Frey
Opublikowane w: Automation, 2021, ISSN 2450-5102
Wydawca: VDI
DOI: 10.51202/9783181023921-5

Mechanical Deburring of Drilling-Induced Exit Burrs in Carbon Fibre Reinforced Polymer Composites

Autorzy: András Gödri; Anna Nikoletta Helle
Opublikowane w: Hungarian Journal of Industry and Chemistry, 2022, ISSN 2450-5102
Wydawca: University of Pannonia
DOI: 10.33927/hjic-2021-20

Episodes of Robotics and Manufacturing Automation Achievements from the Past Decades and Vision for the Next Decade

Autorzy: Geza Haidegger, Imre Paniti
Opublikowane w: Acta Polytechnica Hungarica, Numer 16/10, 2019, Strona(/y) 119-136, ISSN 1785-8860
Wydawca: Obuda University
DOI: 10.12700/aph.16.10.2019.10.8

Recent advances in learning content and infrastructure development for layout and process planning courses at the SZTAKI learning factories

Autorzy: Zsolt Kemény, Richárd Beregi, Bence Tipary, Kristóf Abai, János Nacsa
Opublikowane w: Procedia Manufacturing, Numer 45, 2020, Strona(/y) 319-324, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2020.04.024

Decomposition approach to optimal feature-based assembly planning

Autorzy: Csaba Kardos, András Kovács, József Váncza
Opublikowane w: CIRP Annals, Numer 66/1, 2017, Strona(/y) 417-420, ISSN 0007-8506
Wydawca: Hallwag AG
DOI: 10.1016/j.cirp.2017.04.002

Human–robot collaborative assembly in cyber-physical production: Classification framework and implementation

Autorzy: Xi Vincent Wang, Zsolt Kemény, József Váncza, Lihui Wang
Opublikowane w: CIRP Annals, Numer 66/1, 2017, Strona(/y) 5-8, ISSN 0007-8506
Wydawca: Hallwag AG
DOI: 10.1016/j.cirp.2017.04.101

Simulation model study for manufacturing effectiveness evaluation in crowdsourced manufacturing

Autorzy: Toshiya Kaihara, Yoshiteru Katsumura, Yuuichi Suginishi, Botond Kadar
Opublikowane w: CIRP Annals, Numer 66/1, 2017, Strona(/y) 445-448, ISSN 0007-8506
Wydawca: Hallwag AG
DOI: 10.1016/j.cirp.2017.04.094

Optimisation of process parameters for the orbital and conventional drilling of uni-directional carbon fibre-reinforced polymers (UD-CFRP)

Autorzy: Norbert Geier, Tibor Szalay
Opublikowane w: Measurement, Numer 110, 2017, Strona(/y) 319-334, ISSN 0263-2241
Wydawca: Elsevier BV
DOI: 10.1016/j.measurement.2017.07.007

The Influence of the Machining Parameters on the Quality of the Holes Made by μEDM in Electrically Conductive Alumina-Oxide

Autorzy: Balázs Zsolt Farkas, László Csorba, Tibor Szalay, Valery V. Kuzin, Sergei Yu. Fedorov
Opublikowane w: Solid State Phenomena, Numer 261, 2017, Strona(/y) 101-107, ISSN 1662-9779
Wydawca: Scientific.net
DOI: 10.4028/www.scientific.net/SSP.261.101

A discrete simulation-based algorithm for the technological investigation of 2.5D milling operations

Autorzy: Adam Jacso, Tibor Szalay, Juan Carlos Jauregui, Juvenal Rodriguez Resendiz
Opublikowane w: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018, Strona(/y) 095440621875726, ISSN 0954-4062
Wydawca: Professional Engineering Publishing Ltd.
DOI: 10.1177/0954406218757267

CONCEPTION AN INTELLIGENT NODE ARCHITECTURE FOR INTRALOGISTICS

Autorzy: Gábor Bohács, Dániel Gáspár, Dorina Kánya
Opublikowane w: Acta logistica, Numer 5/2, 2018, Strona(/y) 31-37, ISSN 1339-5629
Wydawca: 4S go, s.r.o.
DOI: 10.22306/al.v5i2.82

Lead time prediction using machine learning algorithms: A case study by a semiconductor manufacturer

Autorzy: Lukas Lingitz, Viola Gallina, Fazel Ansari, Dávid Gyulai, András Pfeiffer, Wilfried Sihn, László Monostori
Opublikowane w: Procedia CIRP, Numer 72, 2018, Strona(/y) 1051-1056, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2018.03.148

An Approach for the Integration of Anticipative Maintenance Strategies within a Production Planning and Control Model

Autorzy: Robert Glawar, Matthias Karner, Tanja Nemeth, Kurt Matyas, Wilfried Sihn
Opublikowane w: Procedia CIRP, Numer 67, 2018, Strona(/y) 46-51, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2017.12.174

Supply chains robustness: Challenges and opportunities

Autorzy: Judit Monostori
Opublikowane w: Procedia CIRP, Numer 67, 2018, Strona(/y) 110-115, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2017.12.185

Cyber-physical Manufacturing in the Light of Professor Kanji Ueda's Legacy

Autorzy: József Váncza, László Monostori
Opublikowane w: Procedia CIRP, Numer 63, 2017, Strona(/y) 631-638, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2017.04.059

Application of Generic CAD Models for Supporting Feature Based Assembly Process Planning

Autorzy: Csaba Kardos, József Váncza
Opublikowane w: Procedia CIRP, Numer 67, 2018, Strona(/y) 446-451, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2017.12.240

PriMa: a prescriptive maintenance model for cyber-physical production systems

Autorzy: Fazel Ansari, Robert Glawar, Tanja Nemeth
Opublikowane w: International Journal of Computer Integrated Manufacturing, Numer 32/4-5, 2019, Strona(/y) 482-503, ISSN 0951-192X
Wydawca: Taylor & Francis
DOI: 10.1080/0951192x.2019.1571236

Towards joint optimization of product design, process planning and production planning in multi-product assembly

Autorzy: Daisuke Tsutsumi, Dávid Gyulai, András Kovács, Bence Tipary, Yumiko Ueno, Youichi Nonaka, László Monostori
Opublikowane w: CIRP Annals, Numer 67/1, 2018, Strona(/y) 441-446, ISSN 0007-8506
Wydawca: Hallwag AG
DOI: 10.1016/j.cirp.2018.04.036

Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates

Autorzy: Norbert Geier, Tibor Szalay, Márton Takács
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 100/9-12, 2019, Strona(/y) 3139-3154, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-018-2895-8

Evaluation, ranking and positioning of measurement methods for pellet production

Autorzy: K. Konrád, Zs.J. Viharos, G. Németh
Opublikowane w: Measurement, Numer 124, 2018, Strona(/y) 568-574, ISSN 0263-2241
Wydawca: Elsevier BV
DOI: 10.1016/j.measurement.2017.12.036

Determination of the working gap and optimal machining parameters for magnetic assisted ball burnishing

Autorzy: Zsolt F. Kovács, Zsolt J. Viharos, János Kodácsy
Opublikowane w: Measurement, Numer 118, 2018, Strona(/y) 172-180, ISSN 0263-2241
Wydawca: Elsevier BV
DOI: 10.1016/j.measurement.2018.01.033

Heterogeneous string stability of unidirectionally interconnected MIMO LTI systems

Autorzy: Gábor Rödönyi
Opublikowane w: Automatica, Numer 103, 2019, Strona(/y) 354-362, ISSN 0005-1098
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.automatica.2019.02.015

Computational method for estimating the domain of attraction of discrete-time uncertain rational systems

Autorzy: Péter Polcz, Tamás Péni, Gábor Szederkényi
Opublikowane w: European Journal of Control, Numer 49, 2019, Strona(/y) 68-83, ISSN 0947-3580
Wydawca: Lavoisier
DOI: 10.1016/j.ejcon.2018.12.004

The fast constant engagement offsetting method for generating milling tool paths

Autorzy: Adam Jacso, Gyula Matyasi, Tibor Szalay
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 103/9-12, 2019, Strona(/y) 4293-4305, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-019-03834-8

The effect of radial rake angle on chip thickness in the case of face milling

Autorzy: György Póka, István Németh
Opublikowane w: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2019, Strona(/y) 095440541984924, ISSN 0954-4054
Wydawca: Professional Engineering Publishing Ltd.
DOI: 10.1177/0954405419849245

Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review

Autorzy: Norbert Geier, J. Paulo Davim, Tibor Szalay
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 125, 2019, Strona(/y) 105552, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105552

Smart Cyber-Physical System applications in production and logistics: special issue editorial

Autorzy: Elisabeth Ilie-Zudor, Davy Preuveneers, Anikó Ekárt, Eckhard Hohwieler
Opublikowane w: International Journal of Computer Integrated Manufacturing, Numer 32/4-5, 2019, Strona(/y) 327-328, ISSN 0951-192X
Wydawca: Taylor & Francis
DOI: 10.1080/0951192x.2019.1616152

Roadmapping towards industrial digitalization based on an Industry 4.0 maturity model for manufacturing enterprises

Autorzy: Andreas Schumacher, Tanja Nemeth, Wilfried Sihn
Opublikowane w: Procedia CIRP, Numer 79, 2019, Strona(/y) 409-414, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2019.02.110

Conceptual Design of an Integrated Autonomous Production Control Model in association with a Prescriptive Maintenance Model (PriMa)

Autorzy: Robert Glawar, Fazel Ansari, Csaba Kardos, Kurt Matyas, Wilfried Sihn
Opublikowane w: Procedia CIRP, Numer 80, 2019, Strona(/y) 482-487, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2019.01.047

The effects of machining strategies of magnetic assisted roller burnishing on the resulted surface structure

Autorzy: Zsolt Kovács, Zsolt János Viharos, János Kodácsy
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 448, 2018, Strona(/y) 012002, ISSN 1757-899X
Wydawca: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012002

Effect of cutting parameters on section borders of the empirical specific cutting force model for cutting with micro-sized uncut chip thickness

Autorzy: István Biró, Tibor Szalay, Norbert Geier
Opublikowane w: Procedia CIRP, Numer 77, 2018, Strona(/y) 279-282, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2018.09.015

Trochoid milling of carbon fibre-reinforced plastics (CFRP)

Autorzy: Norbert Geier, Tibor Szalay, István Biró
Opublikowane w: Procedia CIRP, Numer 77, 2018, Strona(/y) 375-378, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2018.09.039

Experimental Investigation on the Single Point Incremental Forming of AlMn1Mg1 Foils using Flat End Tools

Autorzy: Sherwan M. Najm, Imre Paniti
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 448, 2018, Strona(/y) 012032, ISSN 1757-899X
Wydawca: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012032

Indirect measurement and diagnostics of the tool wear for ceramics micro-milling optimisation

Autorzy: L Móricz, Zs J Viharos, A Németh, A Szépligeti
Opublikowane w: Journal of Physics: Conference Series, Numer 1065/10, 2018, Strona(/y) 102003, ISSN 1742-6588
Wydawca: Institute of Physics
DOI: 10.1088/1742-6596/1065/10/102003

Annihilator design for linear parameter varying systems

Autorzy: Z. Szabó, T. Péni, J. Bokor
Opublikowane w: IFAC-PapersOnLine, Numer 51/24, 2018, Strona(/y) 1185-1192, ISSN 2405-8963
Wydawca: Elsevier
DOI: 10.1016/j.ifacol.2018.09.701

Design of the optimal motions of autonomous vehicles in intersections through neural networks

Autorzy: Balázs Németh, Péter Gáspár, Dávid Szőcs, András Mihály
Opublikowane w: IFAC-PapersOnLine, Numer 51/9, 2018, Strona(/y) 19-24, ISSN 2405-8963
Wydawca: Elsevier
DOI: 10.1016/j.ifacol.2018.07.004

Detection filter design for homogeneous multi-agent networks

Autorzy: Z. Szabó, J. Bokor, S. Hara
Opublikowane w: IFAC-PapersOnLine, Numer 51/24, 2018, Strona(/y) 586-591, ISSN 2405-8963
Wydawca: Elsevier
DOI: 10.1016/j.ifacol.2018.09.635

Transformations for linear parameter varying systems

Autorzy: Z. Szabó, J. Bokor
Opublikowane w: IFAC-PapersOnLine, Numer 51/26, 2018, Strona(/y) 87-93, ISSN 2405-8963
Wydawca: Elsevier
DOI: 10.1016/j.ifacol.2018.11.163

Physical Internet – a Novel Application Area for Industry 4.0

Autorzy: Puskas, Eszter; Bohács, Gábor
Opublikowane w: International Journal of Engineering and Management Sciences, Numer 4, 2019, Strona(/y) 152-161, ISSN 2229-600x
Wydawca: Society for Science and Nature

Drilling fibre reinforced polymer composites (CFRP and GFRP): An analysis of the cutting force of the tilted helical milling process

Autorzy: CsongorPereszlai, NorbertGeier, stvánPoór, Barnabás Zoltán, BalázsGyörgyPóka
Opublikowane w: Composite Structures, 2021, ISSN 0263-8223
Wydawca: Elsevier BV
DOI: 10.1016/j.compstruct.2021.113646

Improvements of surface tribological properties by magnetic assisted ball burnishing

Autorzy: Zsolt F.Kovács, Zsolt J.Viharosa, JánosKodácsy
Opublikowane w: Surface and Coatings Technology, 2022, ISSN 0257-8972
Wydawca: Elsevier BV
DOI: 10.1016/j.surfcoat.2022.128317

Industry 4.0 readiness in manufacturing: Company Compass 2.0, a renewed framework and solution for Industry 4.0 maturity assessment

Autorzy: Nick, Kádár
Opublikowane w: Procedia Manufacturing, 2021, ISSN 2351-9789
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2021.07.007

Beyond the profit motive: Environmentally conscious (re)design of supply chain structures

Autorzy: Judit Monostori
Opublikowane w: Procedia CIRP, Numer 93, 2020, Strona(/y) 808-813, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2020.03.033

A mutualistic framework for sustainable capacity sharing in manufacturing

Autorzy: Ádám Szaller, Gianfranco Pedone, Péter Egri, Ádám Szalóki, Gábor Nick
Opublikowane w: Procedia CIRP, Numer 93, 2020, Strona(/y) 938-943, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2020.04.024

A stochastic approach to calculate assembly cycle times based on spatial shop-floor data stream

Autorzy: Júlia Bergmann, Dávid Gyulai, Dávid Morassi, József Váncza
Opublikowane w: Procedia CIRP, Numer 93, 2020, Strona(/y) 1164-1169, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2020.03.052

Allocating raw materials to competing projects

Autorzy: Peter Egri, Tamás Kis
Opublikowane w: Computers & Industrial Engineering, Numer 143, 2020, Strona(/y) 106386, ISSN 0360-8352
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.cie.2020.106386

A drilling case study in polymer composites reinforced by virgin and recycled carbon fibres (CFRP and rCFRP) to analyse thrust force and torque

Autorzy: Norbert Geier, Dániel István Poór, Csongor Pereszlai, Péter Tamás-Bényei, Jinyang Xu
Opublikowane w: The International Journal of Advanced Manufacturing Technology, 2022, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-022-08947-1

Influence of fibre orientation on cutting force in up and down milling of UD-CFRP composites

Autorzy: Norbert Geier
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 111/3-4, 2020, Strona(/y) 881-893, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-020-06163-3

Effect of lead time prediction accuracy in trust-based resource sharing

Autorzy: Ádám Szaller, Botond Kádár
Opublikowane w: IFAC, 2021, ISSN 2405-8963
Wydawca: Elsevier
DOI: 10.1016/j.ifacol.2021.08.132

Structured Analysis of Methodologies for the Assessment of the Technological Capability of RTOs – Using a Method Engineering Approach.

Autorzy: Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S
Opublikowane w: ECIE 2020 - 15th European Conference on Innovation and Entrepreneurship, 2020, ISBN 1912764687
Wydawca: ECIE

Benchmarking of Data Preprocessing Methods for Machine Learning Applications in Production

Autorzy: Maik Frye, Johannes Mohren, Robert H. Schmitt
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.1016/j.procir.2021.11.009

Identifying and Analyzing Data Model Requirements and Technology Potentials of Machine Learning Systems in the Manufacturing Industry of the Future

Autorzy: Gunter Schuh, Paul Scholz, Thomas Leich, Richard May
Opublikowane w: 2020 61st International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS), 2020, Strona(/y) 1-10, ISBN 978-1-7281-9105-8
Wydawca: IEEE
DOI: 10.1109/itms51158.2020.9259303

Reconfigurable Production Systems (RMS) - First Results of A SurveyAbout the Intelligent Production of the Future

Autorzy: Nick Gábor, Szaller Ádám, Christian Fries
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.1016/j.procs.2021.01.137

Identification and Characterization of Challenges in the Future of Manufacturing for the Application of Machine Learning

Autorzy: Gunther Schuh, Paul Scholz, Maximilian Nadicksbernd
Opublikowane w: 2020 61st International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS), 2020, Strona(/y) 1-10, ISBN 978-1-7281-9105-8
Wydawca: IEEE
DOI: 10.1109/itms51158.2020.9259318

Technology Audit: Procedure for the Assessment of the Technological Maturity of Applied R&D Organizations

Autorzy: Hecklau, Fabian; Kidschun, Florian; Kohl, Holger
Opublikowane w: 2022, ISBN 978-1-914587-36-8
Wydawca: ACI

Intelligent production of the future – first results of a survey

Autorzy: Nick, G.; Szaller, Á.; Viharos, Zs. J.; Várgedő, T.; Bányai, D.; Fries, C.; Fechter, M
Opublikowane w: 2020, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Influence of fixturing setup on quality of edge trimmed UD-CFRP

Autorzy: Pereszlai, Cs.; Geier, N.; Poór, D
Opublikowane w: Proceedings of International Conference on Innovative Technologies, 2019, Strona(/y) 106-109, ISSN 0184-9069
Wydawca: Faculty of Engineering, University of Rijeka

Enabling distance learning and remote collaboration in layout and process planning

Autorzy: Zsolt Kemény, Richárd Beregi, Mátyás Hajós, János Csempesz, János Nacsa
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.2139/ssrn.3858609

Harmonization of Heterogeneous Asset Administration Shells

Autorzy: Nikolaos-Stefanos Koutrakis, Varun Gowtham, Wenzel Baron Pilar von Pilchau, Thomas Josef Jung, Julian Polte, Jörg Hähner, Marius-Iulian Corici, Thomas Magedanz, Eckart Uhlmann
Opublikowane w: 2022
Wydawca: Elsevier
DOI: 10.1016/j.procir.2022.04.016

A hybrid simulation tool to improve the energy efficiency in production environment *

Autorzy: B. Zhou, M. Frye, C. Sander, R. H. Schmitt
Opublikowane w: 2019 IEEE International Conference on Systems, Man and Cybernetics (SMC), Numer Bari, 2019, Strona(/y) 2103-2108, ISBN 978-1-7281-4569-3
Wydawca: IEEE
DOI: 10.1109/smc.2019.8914514

Derivation of Constituent Problem Characteristics for the Application of Machine Learning Systems

Autorzy: Günther Schuh, Paul Scholz, Timon Burger
Opublikowane w: 2021
Wydawca: IEEE
DOI: 10.1109/icict52872.2021.00014

Work in Progress Level Prediction with Ling Short-Term Memory Recurrent Neural Network

Autorzy: Gallina, V., Lingitz, L. Breitschopf, J., Zudor, E., Sihn, W
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2021.07.047

Simulation Framework for Evaluating Production Networks. Middle-European Conference on Applied Theoretical Computer Science

Autorzy: Egri, P.; Váncza, J.; Szaller, Á.; Monostori, J
Opublikowane w: Middle-European Conference on Applied Theoretical Computer Science, 2019, Strona(/y) 22-25, ISSN 2630-371X
Wydawca: Information Society

Case study on technological applications for production planning and control in the context of Industry 4.0

Autorzy: Schuh, G.; Patrick, S
Opublikowane w: . 1st Conference on Produc, Numer 1, 2020
Wydawca: Institutionelles Repositorium der Leibniz Universität Hannover
DOI: 10.15488/9683

CCMS Model – a Novel Approach to Digitalization Level Assessment for Manufacturing Companies

Autorzy: Nick, G.; Szaller, À.; Várgedő, T
Opublikowane w: European conference on management, leadership and governance, 2020, ISSN 2048-9021
Wydawca: Academic Conferences International Limited

Pilot factories in the frame of centre of excellence in production informatics and control.

Autorzy: Czampa, M.; Szalay, T.; Nacsa J.; Nausch, M
Opublikowane w: Proceedings of International Conference on Innovative Technologies, 2019, Strona(/y) 88-91, ISSN 0184-9069
Wydawca: Faculty of Engineering, University of Rijeka

Univerzális mechanikus megfogó vizsgálata optikai elven működő erőmérő használatával

Autorzy: Nagy, A. T.; Paniti, I
Opublikowane w: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020, Strona(/y) 333-337, ISSN 2668-9685
Wydawca: Erdélyi Magyar Műszaki Tudományos Társaság (EMT)

A pilot experimental research on drilling of cfrp under tensile stress

Autorzy: Poór, D.; Geier, N.; Pereszlai, Cs.; Forintos, N
Opublikowane w: Proceedings of International Conference on Innovative Technologies, 2019, Strona(/y) 126-129
Wydawca: Faculty of Engineering, University of Rijeka

Reinforcement Learning for Statistical Process Control in Manufacturing

Autorzy: Viharos, Zs. J.; Jakab, R. B.
Opublikowane w: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Strona(/y) 225-234, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations

Autorzy: Norbert Geier, Jinyang Xu, Csongor Pereszlai, Dániel István Poór, J. Paulo Davim
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2021.07.045

Robotos pakolási feladat megoldása környezetérzékelés segítségével

Autorzy: Hajós, M.; Horváth, D.
Opublikowane w: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020, Strona(/y) 305-308, ISSN 2668-9685
Wydawca: Erdélyi Magyar Műszaki Tudományos Társaság (EMT)

A cost-based model for integrating maintenance strategies in autonomous production control

Autorzy: Glawar, R.; Ansari, F.; Viharos, Zs. J.; Matyas, K.; Sihn, W
Opublikowane w: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Strona(/y) 258-264, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Autonomous Vehicle Drift With a Soft Actor-criticReinforcement Learning Agent

Autorzy: Tóth, Sz. H.; Bárdos, Á.; Viharos Zs. J.
Opublikowane w: 2022
Wydawca: IEEE
DOI: 10.1109/sami54271.2022.9780803

Guideline for Deployment of Machine Learning Models for Predictive Quality in Production

Autorzy: Henrik Heymann, Maik Frye, Alexander D. Kies, Robert H. Schmitt, Andrés Boza
Opublikowane w: 2022
Wydawca: Elsevier
DOI: 10.1016/j.procir.2022.05.068

Böngésző alapú felhasználói felület Panda robothoz

Autorzy: Bocsi, K.; Nacsa, J
Opublikowane w: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020, Strona(/y) 289-292, ISSN 2668-9685
Wydawca: Erdélyi Magyar Műszaki Tudományos Társaság (EMT)

Lead time prediction in a flow-shop environment with analytical and machine learning approaches

Autorzy: Gyulai, D., Pfeiffer, A., Nick, G., Gallina, V., Sihn, W., Monostori, L.
Opublikowane w: 16th IFAC Symposium on Information Control Problems in Manufacturing, 2018
Wydawca: IFAC

Human Resources Management: Meta-Study - Analysis of Future Competences in Industry 4.0

Autorzy: Hecklau, F.; Orth, R.; Kidschun, F.; Kohl, H
Opublikowane w: 13th European Conference on Management Leadership and Governance, 2017, ISBN 978-1-911218-63-0
Wydawca: nn

Improving the Accuracy of Cycle Time Estimation for Simulation in Volatile Manufacturing Execution Environments

Autorzy: Pfeiffer A., Gyulai D., Monostori L.
Opublikowane w: ASIM 2017 Conference, 2017, ISBN 978-3-7376-0192-4
Wydawca: kassel university press
DOI: 10.19211/KUP9783737601931

How to Achieve Physical Internet through Lean Principles and Industry 4.0

Autorzy: Gizem Erboz, Dr. Gábor Bohács, Dr. Zoltán Szegedi
Opublikowane w: 4. Wissenschaftliche Industrielogistik-Dialog 2017 (WiLD 2017), 2017
Wydawca: nn

Digital Twin in manufacturing: A categorical literature review

Autorzy: Werner Kritzinger, Matthias Karner, Georg Traar, Jan Henjes, Wilfried Sihn
Opublikowane w: 16th IFAC Symposium on Information Control Problems in Manufacturin, 2018
Wydawca: IFAC

Integrating machine tool condition monitoring and production scheduling in metal forming

Autorzy: Matthias Karner, Robert Glawar, Wilfried Sihn, Kurt Matyas
Opublikowane w: International Conference Management of Technology – Step to Sustainable Production (MOTSP 2018), 2018
Wydawca: nn

Investigation of Micro Milled Surface Characteristics

Autorzy: B.-Z. Balázs, T Szalay, M. Takács
Opublikowane w: International Conference on Innovative Technologies: IN-TECH 2017, 2017, ISSN 0184-9069
Wydawca: nn

Dynamical Aspects of Micro Milling Process

Autorzy: M. Takács, B.-Z. Balázs, J.-C. Jáuregui
Opublikowane w: International Conference on Innovative Technologies, 2017, ISSN 0184-9069
Wydawca: nn

Simulation and scheduling of AGV based robotic assembly systems

Autorzy: Andor Viharos, István Németh
Opublikowane w: IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018),, 2018
Wydawca: IFAC

Analysing and Optimizing 2.5D Circular Pocket Machining Strategies

Autorzy: Adam Jacso, Tibor Szalay
Opublikowane w: 2017, Strona(/y) 355-364
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-68619-6_34

PRODUCTION LOG DATA ANALYSIS FOR REJECT RATE PREDICTION AND WORKLOAD ESTIMATION

Autorzy: Andras Pfeiffer, David Gyulai, Adam Szaller, Laszlo Monostori
Opublikowane w: 2018 Winter Simulation Conference (WSC), 2018, Strona(/y) 3364-3374, ISBN 978-1-5386-6572-5
Wydawca: IEEE
DOI: 10.1109/wsc.2018.8632482

A Novel Big-data-based Estimation Method of Side-slip Angles for Autonomous Road Vehicles

Autorzy: Dániel Fényes, Balázs Németh, Péter Gáspár
Opublikowane w: Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics, 2018, Strona(/y) 420-426, ISBN 978-989-758-321-6
Wydawca: SCITEPRESS - Science and Technology Publications
DOI: 10.5220/0006849504200426

Anti-Lock Braking Control Design for Electric Vehicles Using LPV Methods

Autorzy: Balazs Nemeth, Mate Fazekas, Peter Gaspar
Opublikowane w: 2018 26th Mediterranean Conference on Control and Automation (MED), 2018, Strona(/y) 1-6, ISBN 978-1-5386-7890-9
Wydawca: IEEE
DOI: 10.1109/med.2018.8442426

Reconfiguration control of in-wheel electric vehicle based on battery state of charge

Autorzy: Andras Mihaly, Pater Gaspar
Opublikowane w: 2018 European Control Conference (ECC), 2018, Strona(/y) 1-6, ISBN 978-3-9524-2698-2
Wydawca: IEEE
DOI: 10.23919/ecc.2018.8550283

Side-slip Angle Estimation of Autonomous Road Vehicles Based on Big Data Analysis

Autorzy: Daniel Fenyes, Balazs Nemeth, Mate Asszonyi, Peter Gaspar
Opublikowane w: 2018 26th Mediterranean Conference on Control and Automation (MED), 2018, Strona(/y) 849-854, ISBN 978-1-5386-7890-9
Wydawca: IEEE
DOI: 10.1109/med.2018.8443010

The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)

Autorzy: Hecklau, Fabian; Orth, Ronald; Kidschun, Florian; Nick, Gabor
Opublikowane w: European Conference on Management, Leadership and Governance, 2018, ISBN 978-1-912764-01-3
Wydawca: """Dr. Ing. Benny M.E. de Waal Prof. dr. Pascal Ravesteijn"""

Corporate Governance: The Evaluation Based Approach to the Governance and Business Models of the EPIC Centre of Excellence in Production Informatics and Control (EPIC Coe)

Autorzy: Monostori, László and Kádár, Botond and Nick, Gábor András and Pfeiffer, András and Várgedő, T.
Opublikowane w: Proceedings of the 14th European Conference on Management, Leadership and Governance, 2018, Strona(/y) 161-170, ISBN 9781-912764020
Wydawca: """Dr. Ing. Benny M.E. de Waal Prof. dr. Pascal Ravesteijn"""

Quality Improvement of Milling Processes Using Machine Learning-Algorithms

Autorzy: Maik Frye, Robert H. Schmitt
Opublikowane w: 16th IMEKO TC10 Conference“Testing, Diagnostics & Inspection as a comprehensive value chain for Quality & Safety, 2019, Strona(/y) 142-147, ISBN 978-92-990084-1-6
Wydawca: IMEKO

Generating human work instructions from assembly plans

Autorzy: Kardos, Cs.; Kovács, A.; Pataki, B.E.; Váncza, J.
Opublikowane w: 28th International Conference on Automated Planning and Scheduling, Numer 1, 2018, Strona(/y) 31-39
Wydawca: Delft University

Product quality and cutting tool analysis for micro-milling of ceramics

Autorzy: L Móricz, Zs. J. Viharos, A. Németh, A. Szépligeti
Opublikowane w: 16th IMEKO TC10 Conference, 2019, ISBN 978-92-990084-1-6
Wydawca: IMEKO

Issues in Manufacturing Automation & Robotics within the Past 4 Decades and Vision for the Next

Autorzy: Haidegger, G. and Paniti, I.
Opublikowane w: IEEE 23nd International Conference on Intelligent Engineering Systems, 2019, ISBN 9781-728112138
Wydawca: IEEE

Magnetic Assisted Ball Burnishing of Magnetizable and Non-Magnetizable Materials

Autorzy: Zsolt Ferenc Kovács, Zsolt János Viharos, János Kodácsy, Roland Sándor
Opublikowane w: 16th IMEKO TC10 Conference, 2019, Strona(/y) 32-38, ISBN 978-92-990084-1-6
Wydawca: IMEKO

Preserving hands-on learning experience with physical equipment in distance learning—findings of a course pilot

Autorzy: Zsolt Kemény,Titanilla Komenda, Mátyás Hajós, Richárd Beregi, János Nacsa
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.2139/ssrn.4073821

Structured Data Preparation Pipeline for Machine Learning-Applications in Production

Autorzy: Frye, M.; Schmitt, R. H
Opublikowane w: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Strona(/y) 241-246, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Lubricants and Affecting Parameters on Hardness in SPIF of AA1100 Aluminum

Autorzy: Paniti, I.; Najm, S. M.; Viharos, Zs. J
Opublikowane w: . 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Strona(/y) 387-392, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Technological Trends in Context of Industry 4.0 and Their Industrial Applications

Autorzy: Ing. Gunther Schuh, Patrick Scholz, Marc Patzwald
Opublikowane w: 2019 60th International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS), 2019, Strona(/y) 1-6, ISBN 978-1-7281-5709-2
Wydawca: IEEE
DOI: 10.1109/itms47855.2019.8940720

Comprehensive Comparison of MTM and BasicMOST, as the Most Widely Applied PMTS Analysis Methods

Autorzy: Viharos, Zs. J.; Bán, B
Opublikowane w: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Strona(/y) 393-401, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Expert System for the Machine Learning Pipeline in Manufacturing

Autorzy: Maik Frye, Jonathan Krauß, Robert H. Schmitt
Opublikowane w: 2021
Wydawca: IFAC INCOM
DOI: 10.1016/j.ifacol.2021.08.014

Holistic Concept Towards a Reference Architecture Model for Predictive Maintenance

Autorzy: Eckart Uhlmann, Julian Polte, Nikolaos-Stefanos Koutrakis
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.1016/j.procir.2021.11.241

Veränderte Kompetenzanforderungen im Rahmen von Digitalisierung und Industrie 4.0

Autorzy: Hecklau, F.; Orth, R.; Kidschun, F.; Tominaj, S.: Veränderte
Opublikowane w: State-of-the-Art and Outlook Proceedings of the 10th Knowledge Management in Digital Work Environments, 2020
Wydawca: Fachhochschule Potsdam
DOI: 10.34678/opus4-2412

Effect of CAM Path Strategies on Tool Life in Ceramics Micro-Cutting

Autorzy: Móricz, L.; Viharos, Zs. J.; Büki, M
Opublikowane w: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Strona(/y) 92-98, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Analyzing the Role of Research and Technology Organizations (RTOs) in National Innovation Systems (NIS)

Autorzy: Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S
Opublikowane w: ECMLG 2020 - 16th European Conference on Management Leadership and Governance, 2020, ISBN 1912764776
Wydawca: ECMLG

Drilling of curved carbon fibre reinforced polymer (CFRP) composite plates

Autorzy: N Geier, Cs Pereszlai, DI Poór, BZ Balázs
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.1016/j.procir.2021.03.057

A two-step digitalization level assessment approach for manufacturing companies

Autorzy: Nick Gábor, Szaller Ádám, Thomas Scheuer
Opublikowane w: 2021
Wydawca: Elsevier
DOI: 10.1016/j.promfg.2021.07.005

Maturity Model for AI in Smart Production Planning and Control System

Autorzy: Eduardo Colangelo; Christian Fries; Theresa-Franziska Hinrichsen; Ádám Szaller; Gábor Nick
Opublikowane w: 2022
Wydawca: Elsevier
DOI: 10.1016/j.procir.2022.05.014

Development of the Supply Chain Management 2040 – Opportunities and challenges

Autorzy: Schiffer, M.; Dörr, D. M.
Opublikowane w: 1st Conference on Production Systems and Logistics, Numer 1, 2020, Strona(/y) 29-37
Wydawca: publish‐Ing.
DOI: 10.15488/9644

Moduláris szerelési paletta oktatási célú kollaboratív robotosmunkaállomáshoz

Autorzy: Szűr, D.; Nacsa, J.; Beregi, R.; Kemény, Z
Opublikowane w: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020, Strona(/y) 351-354, ISSN 2668-9685
Wydawca: Erdélyi Magyar Műszaki Tudományos Társaság (EMT)

Condition Monitoring Concept for Industrial Robots

Autorzy: Uhlmann, E.; Polte, J.; Geisert, C.
Opublikowane w: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, Strona(/y) 253-257, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Passivity analysis of rational LPV systems using Finsler’s lemma

Autorzy: Peter Polcz, Balazs Kulcsar, Tamas Peni, Gabor Szederkenyi
Opublikowane w: 2019 IEEE 58th Conference on Decision and Control (CDC), 2019, Strona(/y) 3793-3798, ISBN 978-1-7281-1398-2
Wydawca: IEEE
DOI: 10.1109/cdc40024.2019.9029877

Customer-Induced Planning Deviations within Order Management

Autorzy: Christian Fries; Thomas Bauernhansl
Opublikowane w: 2022
Wydawca: Elsevier
DOI: 10.1016/j.procs.2022.01.206

Usability investigation of portable coordinate measuring equipment.

Autorzy: Gábriel, M.; Czampa, M.; Szalay, T
Opublikowane w: Proceedings of International Conference on Innovative Technologies, 2019, Strona(/y) 102-105, ISSN 0184-9069
Wydawca: Faculty of Engineering, University of Rijeka

Adaptive scheduling through machine learning-based process parameter prediction

Autorzy: Frye, M.; Gyulai, D.; Bergmann, J.; H. Schmitt, R
Opublikowane w: Conference on High Speed Machining, 2019, ISSN 1805-0476
Wydawca: MM Science Journal

Engineering Support Systems for Industrial Machines and Plants

Autorzy: Youichi Nonaka, Takahiro Nakano, Kenji Ohya, Atsuko Enomoto, Gábor Erdős, Gergely Horváth, József Váncza
Opublikowane w: Advances in Through-life Engineering Services, 2017, Strona(/y) 199-220, ISBN 978-3-319-49938-3
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-49938-3_13

A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance

Autorzy: Klaudia Kovacs, Fazel Ansari, Claudio Geisert, Eckart Uhlmann, Robert Glawar, Wilfried Sihn
Opublikowane w: Machine Learning for Cyber Physical Systems - Selected papers from the International Conference ML4CPS 2018, Numer 9, 2019, Strona(/y) 87-96, ISBN 978-3-662-58484-2
Wydawca: Springer Berlin Heidelberg
DOI: 10.1007/978-3-662-58485-9_10

Machinability analysis of carbon fibre-reinforced plastics using compression tools

Autorzy: Somoskői B., Geiger N.
Opublikowane w: Bánki Közlemények, Numer 1(3), 5-10, 2018, 2018, Strona(/y) 5-10
Wydawca: Bánki Közlemények

Proceedings of the 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”.

Autorzy: Viharos, Zs. J.; Ciani, L.; Bilski, P.; Jakovcic, M
Opublikowane w: 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”, 2020, ISBN 978-92-990084-6-1
Wydawca: IMEKO

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz