FLEXIBLE COMBINED PRODUCTION OF POWER, HEAT AND TRANSPORT FUELS FROM RENEWABLE ENERGY SOURCES

Livrables

Electronic outcomes of the second Topical Workshop

The presentations and other communication material of the first workshop will be published on project web page.

Electronic outcomes of the first Topical Workshop

The presentations and other communication material of the first workshop will be published on project web page.

Project website established

Website established to be one important channel for communications and disseminations.

First Newsletter/promotional leaflet

A promotional newsletter of the project describing the targets and achievements from first 18 months.

Second Newsletter/promotional leaflet

A promotional newsletter of the project focusing on the final results of the project and on the future exploitation potential.

Publication on the results of the reformer R&D (draft supplied to journal)

Draft publication on the gas cleaning results supplied to selected open access journal or conference.

Market review report

The report including: market conditions, most desired products (e.g. jet, chemicals, diesel), definition of refinery units and other processing plants (e.g. biofuels facilities) that can process FT wax, required FT wax properties, technical feasibility of introduction of FT wax into selected refinery types

Publication on the results of gasification and filtration R&D (draft supplied to journal)

Draft publication on the gasification and filtration results supplied to selected open access journal or conference.

Review report on electrolysis technologies

D2.1 includes the following studies: a) estimated efficiencies for selected electrolysis technologies, b) possibilities for energy integration to improve efficiency, c) typical time span for start-up and shut-down as well as for load changing, d) possibilities and costs for storing excess oxygen to be used in the enriched-air operation of the gasification plant.

Public report on the feasibility of the developed process

Report on the technical, economic and environmental feasibility of the FLEXCHX concept in selected applications

Techno economic assessment and LCA report comparing 2-3 process configurations

Final report on the technical, economic and environmental performance of the process in 2-3 selected applications

Presentation/article on the extended-time tests with FLEXCX process

Draft publication on the process development and validations results supplied to selected open access journal or conference.

Report on the sustainably available feedstock basis

Report including process flow sheet, estimated process conditions and efficiencies as well as a list of KPI for the different process stages.

Conference presentation on the combined heat, power and fuel markets

Presentation to be made in selected national or European conference or seminar.

Publications

Intensified, Two-Stage Fischer-Tropsch Synthesis of Gasification Product

Auteurs: Julian Baudner
Publié dans: Master Thesis, 2019
Éditeur: Ineratec

Commissioning and test runs of biomass gasification pilot unit (in Finnish)

Auteurs: Tommi Konttinen
Publié dans: Bachelor Thesis, 2019
Éditeur: OAMK Finland

Compact Gasification and Synthesis for Flexible Production of Transport Fuels and Heat - Webinar

Auteurs: Kurkela, Esa; Tuomi, Sanna; Kihlman, Johanna; Balzer, Harald; Frilund, Christian; Rollin, Benjamin; Boeltken, Tim; Wuokko, Mikko; Jenčík, Jan; Tota, Vincenzo; Dietrich, Ralph-Uwe
Publié dans: Proceedings of the FLEXCHX & COMSYN Webinar (Jan 2021), Numéro Jan 2021, 2021
Éditeur: VTT
DOI: 10.5281/zenodo.4518322

FLEXCHX Workshop Prodeedings, 3 April 2019 Lithuania

Auteurs: Žygimantas Vaičiūnas; Ilkka Hannula; Esa Kurkela; Jussi Uitto; Manuel Selinsek; Outi Ervasti; Mikko Wuokko; Gytis Junevičius
Publié dans: Prodeedings of FLEXCHX Workshop, 3 April 2019 Lithuania, Numéro April 2019, 2019
Éditeur: VTT

Flexible Hybrid Process for Combined Production of Heat, Power and Renewable Feedstock for Refineries

Auteurs: Kurkela, Esa; Tuomi, Sanna; Kurkela, Minna; Hiltunen, Ilkka
Publié dans: Proceedings of the 27th European Biomass Conference and Exhibition: EUBCE 2019, Numéro July 2019, 2019, Page(s) pp.539-543
Éditeur: ETA-Florence Renewable Energies
DOI: 10.5281/zenodo.3515920

INTEGRATION OF WASTE HEAT STREAMS INTO INDUSTRIAL CHPS OR DISTRICT HEATING UNITS

Auteurs: Raminta Skvorčinskienė; Nerijus Striūgas; Esa Kurkela; Rimantas Bakas; Mantas Radinas
Publié dans: Proceedings of the 27th European Biomass Conference and Exhibition: EUBCE 2019, Numéro July 2019, 2019, Page(s) 821-826
Éditeur: ETA-Florence Renewable Energies
DOI: 10.5281/zenodo.3516632

Pilot-scale development of pressurized fixed-bed gasification for synthesis gas production from biomass residues

Auteurs: Esa Kurkela,* Minna Kurkela, Ilkka Hiltunen
Publié dans: Biomass Conversion and Biorefinery, Numéro May 2021, 2021, ISSN 2190-6823
Éditeur: Springer

Flexible Hybrid Process for Combined Production of Heat, Power and Renewable Feedstock for Refineries : Managing seasonal energy supply and demand for heat and power in Europe

Auteurs: Esa Kurkela, Minna Kurkela, Christian Frilund, Ilkka Hiltunen, Benjamin Rollins, Andrew Steele
Publié dans: Johnson Matthey Technology Review, Numéro 65/2, 2021, Page(s) 333-345, ISSN 2056-5135
Éditeur: Johnson Matthey
DOI: 10.1595/205651321x16013744201583

Production of synthesis gas from biomass residues by staged fixed-bed gasification - results from pilot test campaigns

Auteurs: E. Kurkela, M. Kurkela, I. Hiltunen
Publié dans: Chemical Engineering Transactions, Numéro June 2021, 2021, Page(s) vol. 86, 2021, ISSN 2283-9216
Éditeur: AIDIC
DOI: 10.3303/cet2186002

Process concept for flexible production of renewable transportation fuels and heat - Results for the pilot-scale process validation tests

Auteurs: E. Kurkela, M. Kurkela, C. Frilund, I. Hiltunen
Publié dans: VTT Technology, Numéro VTT Technology 387, April 2021, 2021
Éditeur: VTT
DOI: 10.32040/2242-122x.2021.t387

Recherche de données OpenAIRE...

Livrables

Publications

Partager cette page

Télécharger