CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.
Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .
Rezultaty
The presentations and other communication material of the first workshop will be published on project web page.
Electronic outcomes of the first Topical Workshop (odnośnik otworzy się w nowym oknie)The presentations and other communication material of the first workshop will be published on project web page.
Project website established (odnośnik otworzy się w nowym oknie)Website established to be one important channel for communications and disseminations.
First Newsletter/promotional leaflet (odnośnik otworzy się w nowym oknie)A promotional newsletter of the project describing the targets and achievements from first 18 months.
Second Newsletter/promotional leaflet (odnośnik otworzy się w nowym oknie)A promotional newsletter of the project focusing on the final results of the project and on the future exploitation potential.
Draft publication on the gas cleaning results supplied to selected open access journal or conference.
Market review report (odnośnik otworzy się w nowym oknie)The report including: market conditions, most desired products (e.g. jet, chemicals, diesel), definition of refinery units and other processing plants (e.g. biofuels facilities) that can process FT wax, required FT wax properties, technical feasibility of introduction of FT wax into selected refinery types
Publication on the results of gasification and filtration R&D (draft supplied to journal) (odnośnik otworzy się w nowym oknie)Draft publication on the gasification and filtration results supplied to selected open access journal or conference.
Review report on electrolysis technologies (odnośnik otworzy się w nowym oknie)D2.1 includes the following studies: a) estimated efficiencies for selected electrolysis technologies, b) possibilities for energy integration to improve efficiency, c) typical time span for start-up and shut-down as well as for load changing, d) possibilities and costs for storing excess oxygen to be used in the enriched-air operation of the gasification plant.
Public report on the feasibility of the developed process (odnośnik otworzy się w nowym oknie)Report on the technical, economic and environmental feasibility of the FLEXCHX concept in selected applications
Techno economic assessment and LCA report comparing 2-3 process configurations (odnośnik otworzy się w nowym oknie)Final report on the technical, economic and environmental performance of the process in 2-3 selected applications
Presentation/article on the extended-time tests with FLEXCX process (odnośnik otworzy się w nowym oknie)Draft publication on the process development and validations results supplied to selected open access journal or conference.
Report on the sustainably available feedstock basis (odnośnik otworzy się w nowym oknie)Report including process flow sheet, estimated process conditions and efficiencies as well as a list of KPI for the different process stages.
Conference presentation on the combined heat, power and fuel markets (odnośnik otworzy się w nowym oknie)Presentation to be made in selected national or European conference or seminar.
Publikacje
Autorzy:
Julian Baudner
Opublikowane w:
Master Thesis, 2019
Wydawca:
Ineratec
Autorzy:
Tommi Konttinen
Opublikowane w:
Bachelor Thesis, 2019
Wydawca:
OAMK Finland
Autorzy:
Kurkela, Esa; Tuomi, Sanna; Kihlman, Johanna; Balzer, Harald; Frilund, Christian; Rollin, Benjamin; Boeltken, Tim; Wuokko, Mikko; Jenčík, Jan; Tota, Vincenzo; Dietrich, Ralph-Uwe
Opublikowane w:
Proceedings of the FLEXCHX & COMSYN Webinar (Jan 2021), Numer Jan 2021, 2021
Wydawca:
VTT
DOI:
10.5281/zenodo.4518322
Autorzy:
Žygimantas Vaičiūnas; Ilkka Hannula; Esa Kurkela; Jussi Uitto; Manuel Selinsek; Outi Ervasti; Mikko Wuokko; Gytis Junevičius
Opublikowane w:
Prodeedings of FLEXCHX Workshop, 3 April 2019 Lithuania, Numer April 2019, 2019
Wydawca:
VTT
Autorzy:
Kurkela, Esa; Tuomi, Sanna; Kurkela, Minna; Hiltunen, Ilkka
Opublikowane w:
Proceedings of the 27th European Biomass Conference and Exhibition: EUBCE 2019, Numer July 2019, 2019, Strona(/y) pp.539-543
Wydawca:
ETA-Florence Renewable Energies
DOI:
10.5281/zenodo.3515920
Autorzy:
Raminta Skvorčinskienė; Nerijus Striūgas; Esa Kurkela; Rimantas Bakas; Mantas Radinas
Opublikowane w:
Proceedings of the 27th European Biomass Conference and Exhibition: EUBCE 2019, Numer July 2019, 2019, Strona(/y) 821-826
Wydawca:
ETA-Florence Renewable Energies
DOI:
10.5281/zenodo.3516632
Autorzy:
Esa Kurkela,* Minna Kurkela, Ilkka Hiltunen
Opublikowane w:
Biomass Conversion and Biorefinery, Numer May 2021, 2021, ISSN 2190-6823
Wydawca:
Springer
Autorzy:
Esa Kurkela, Minna Kurkela, Christian Frilund, Ilkka Hiltunen, Benjamin Rollins, Andrew Steele
Opublikowane w:
Johnson Matthey Technology Review, Numer 65/2, 2021, Strona(/y) 333-345, ISSN 2056-5135
Wydawca:
Johnson Matthey
DOI:
10.1595/205651321x16013744201583
Autorzy:
E. Kurkela, M. Kurkela, I. Hiltunen
Opublikowane w:
Chemical Engineering Transactions, Numer June 2021, 2021, Strona(/y) vol. 86, 2021, ISSN 2283-9216
Wydawca:
AIDIC
DOI:
10.3303/cet2186002
Autorzy:
E. Kurkela, M. Kurkela, C. Frilund, I. Hiltunen
Opublikowane w:
VTT Technology, Numer VTT Technology 387, April 2021, 2021
Wydawca:
VTT
DOI:
10.32040/2242-122x.2021.t387
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników