Skip to main content

Development Of Ceramics 3D-Printing, Additive Manufacturing

Deliverables

Project Presentation in MS Word and PDF formats

Project Presentation in MS Word and PDF formats

Progress WP 2 Year 1 report

Progress WP 2 Year 1 report

Standardisation Regulations Progress Review & Evaluation

Standardisation Regulations Progress Review & Evaluation

Progress WP 3 Year 2 report

Progress WP 3 Year 2 report

Progress WP 2 Year 2 report

Progress WP 2 Year 2 report

Progress WP 4 Year 1 report

Progress WP 4 Year 1 report

Progress WP 1 Year 2 report

Progress WP 1 Year 2 report

Progress WP 4 Year 2 report

Progress WP 4 Year 2 report

Job offers

Job offers

Progress WP 5 Year 1 report

Progress WP 5 Year 1 report

1st Summer-Schools

events analysis reports of 1st Summer-Schools

Progress WP 5 Year 2 report

Progress WP 5 Year 2 report

Induction school

events analysis reports of Induction school

Progress WP 3 Year 1 report

Progress WP 3 Year 1 report

Progress WP1 Year 1 report

Progress WP1 Year 1 report

Website update 1

Website update 1 www.DOC-3D-Ceram.eu

Public engagement materials, channels: website, Facebook

Public engagement materials, channels: website, Facebook

Website Creation

Website Creation www.DOC-3D-Ceram.eu

Website update 2

Website update 2 www.DOC-3D-Ceram.eu

Searching for OpenAIRE data...

Publications

Grain refinement and mechanical properties for AISI304 stainless steel single-tracks by laser melting deposition: Mathematical modelling versus experimental results

Author(s): Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Diana Chioibasu, Gianina Popescu-Pelin, Carmen Ristoscu, Ion N. Mihailescu
Published in: Results in Physics, 22, 2021, Page(s) 103880, ISSN 2211-3797
Publisher: Elsevier
DOI: 10.1016/j.rinp.2021.103880

Densification of surface-modified silicon carbide powder by spark-plasma-sintering

Author(s): Alejandro Montón; Francis Maury; Geoffroy Chevallier; Claude Estournès; Marc Ferrato; David Grossin
Published in: Journal of the European Ceramic Society, 41(15), 2021, Page(s) 7543-7551, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2021.07.036

Keyhole Formation by Laser Drilling in Laser Powder Bed Fusion of Ti6Al4V Biomedical Alloy: Mesoscopic Computational Fluid Dynamics Simulation versus Mathematical Modelling Using Empirical Validation

Author(s): Asif Ur Rehman, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu
Published in: Nanomaterials, 11(12), 2020, Page(s) 3284, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano11123284

Spatter Formation and Splashing Induced Defects in Laser-Based Powder Bed Fusion of AlSi10Mg Alloy: A Novel Hydrodynamics Modelling with Empirical Testing

Author(s): Asif Ur Rehman, Muhammad Arif Mahmood, Peyman Ansari, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu
Published in: Metals, 11(12), 2021, Page(s) 2023, ISSN 2075-4701
Publisher: MDPI
DOI: 10.3390/met11122023

Thermal Nonlinear Klein–Gordon Equation for Nano-/Micro-Sized Metallic Particle–Attosecond Laser Pulse Interaction

Author(s): Mihai Oane, Muhammad Arif Mahmood, Andrei C. Popescu, Alexandra Banica, Carmen Ristoscu, Ion N. Mihailescu
Published in: Materials, 14(4), 2021, Page(s) 857, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma14040857

Laser Coatings via State-of-the-Art Additive Manufacturing: A Review

Author(s): Muhammad Arif Mahmood, Alexandra Banica, Carmen Ristoscu, Ion N. Mihailescu
Published in: Coatings, 11(3), 2021, Page(s) 296, ISSN 2079-6412
Publisher: MDPI
DOI: 10.3390/coatings11030296

Experimental and numerical study for direct powder bed selective laser processing (sintering/melting) of silicon carbide ceramic

Author(s): Alejandro Montón, Mohammed Abdelmoula, Gökhan Küçüktürk, Francis Maury, David Grossin, Marc Ferrato
Published in: Materials Research Express, 8/4, 2021, Page(s) 045603, ISSN 2053-1591
Publisher: IOP Publishing Ltd
DOI: 10.1088/2053-1591/abf6fc

Artificial Neural Network Algorithms for 3D Printing

Author(s): Muhammad Arif Mahmood, Anita Ioana Visa, Carmen Ristoscu, Ion N. Mihailescu
Published in: Materials, 14(1), 2021, Page(s) 163, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma14010163

Mesoscopic Computational Fluid Dynamics Modelling for the Laser-Melting Deposition of AISI 304 Stainless Steel Single Tracks with Experimental Correlation: A Novel Study

Author(s): Asif Ur Rehman, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu
Published in: Metals, 11(10), 2021, Page(s) • Asif Ur Rehman, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu, ISSN 2075-4701
Publisher: MDPI
DOI: 10.3390/met11101569

Use of X-ray Computed Tomography for Assessing Defects in Ti Grade 5 Parts Produced by Laser Melting Deposition

Author(s): Diana Chioibasu, Sabin Mihai, Muhammad Arif Mahmood, Mihail Lungu, Ioana Porosnicu, Adrian Sima, Cosmin Dobrea, Ion Tiseanu, Andrei C. Popescu
Published in: Metals, 10(11), 2021, Page(s) 1408, ISSN 2075-4701
Publisher: MDPI
DOI: 10.3390/met10111408

Influence of dopants on thermal stability and densification of β-tricalcium phosphate powders

Author(s): N. Somers, F. Jean, M. Lasgorceix, H. Curto, G. Urruth, A. Thuault, F. Petit, A. Leriche
Published in: Open Ceramics, 2021, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.oceram.2021.100168

Development of calcium phosphate suspensions suitable for the Stereolithography process

Author(s): C. Goutagny, S. Hocquet, D. Hautcoeur, M. Lasgorceix, N. Somers, A. Leriche
Published in: Open Ceramics, 2021, ISSN 0955-2219
Publisher: Elsevier BV
DOI: 10.1016/j.oceram.2021.100167

Estimation of clad geometry and corresponding residual stress distribution in laser melting deposition: analytical modeling and experimental correlations

Author(s): Muhammad Arif Mahmood, Andrei C. Popescu, Claudiu Liviu Hapenciuc, Carmen Ristoscu, Anita Ioana Visan, Mihai Oane, Ion N. Mihailescu
Published in: The International Journal of Advanced Manufacturing Technology, 111/1-2, 2020, Page(s) 77-91, ISSN 0268-3768
Publisher: Springer Verlag
DOI: 10.1007/s00170-020-06047-6

Bridging the analytical and artificial neural network models for keyhole formation with experimental verification in laser melting deposition: A novel approach

Author(s): Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Asma Channa, Sabin Mihai, Carmen Ristoscu, Ion N. Mihailescu
Published in: Results in Physics, 26, 2021, Page(s) 104440, ISSN 2211-3797
Publisher: Elsevier
DOI: 10.1016/j.rinp.2021.104440

Metal Matrix Composites Synthesized by Laser-Melting Deposition: A Review

Author(s): Muhammad Arif Mahmood, Andrei C. Popescu, Ion N. Mihailescu
Published in: Materials, 13/11, 2020, Page(s) 2593, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma13112593

Non-Fourier Estimate of Electron Temperature in Case of Femtosecond Laser Pulses Interaction with Metals

Author(s): Anca M. Bucă, Mihai Oane, Muhammad Arif Mahmood, Ion N. Mihăilescu, Andrei C. Popescu, Bogdan A. Sava, Carmen Ristoscu
Published in: Metals, 10/5, 2020, Page(s) 606, ISSN 2075-4701
Publisher: MDPI
DOI: 10.3390/met10050606

A review of additive manufacturing of ceramics by powder bed selective laser processing (sintering / melting): Calcium phosphate, silicon carbide, zirconia, alumina, and their composites

Author(s): David Grossin, Alejandro Montón, Pedro Navarrete-Segado, Eren Özmen, Giovanni Urruth, Francis Maury, Delphine Maury, Christine Frances, Mallorie Tourbin, Pascal Lenormand, Ghislaine Bertrand
Published in: Open Ceramics, 5, 2021, Page(s) 100073, ISSN 2666-5395
Publisher: Elsevier
DOI: 10.1016/j.oceram.2021.100073

Powder bed selective laser process (sintering/melting) applied to tailored calcium phosphate-based powders

Author(s): P. Navarrete-Segado; C. Frances; M. Tourbin; C. Tenailleau; B. Duployer; D. Grossin
Published in: Additive Manufacturing, 50, 2022, Page(s) 102542, ISSN 2214-8604
Publisher: Elsevier BV
DOI: 10.1016/j.addma.2021.102542

Powder Bed Selective Laser Processing of Alumina: Scanning Strategies Investigation

Author(s): Mohamed Eid Saied Abdelmoula, Gökhan Küçüktürk, Enrique Juste and Fabrice Petit
Published in: Applied Sciences, 12(2), 2022, Page(s) 764, ISSN 2076-3417
Publisher: MDPI-Multidisipliner Digital Publishing Institute
DOI: 10.3390/app12020764

An Analytical Multiple-Temperature Model for Flash Laser Irradiation on Single-Layer Graphene

Author(s): Anca M. Bucă, Mihai Oane, Ion N. Mihăilescu, Muhammad Arif Mahmood, Bogdan A. Sava, Carmen Ristoscu
Published in: Nanomaterials, 10/7, 2020, Page(s) 1319, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano10071319

Scanning Strategy Investigation for Direct Powder Bed Selective Laser Processing of Silicon Carbide Ceramic

Author(s): Mohamed Eid Saied Abdelmoula, Alejandro Montón Zarazaga ,Gökhan Küçüktürk, Francis Maury, David Grossin and Marc Ferrato
Published in: Applied Sciences, 12(2), 2022, Page(s) 788, ISSN 2076-3417
Publisher: MDPI-Multidisipliner Digital Publishing Institute
DOI: 10.3390/app12020788

Lithography-based manufacturing of advanced ceramics for orthopaedic applications: A comparative tribological study

Author(s): A. Paterlini, A. Stamboulis, V. Turq, R. Laloo, M. Schwentenwein, D. Brouczek, M. Piccinini, G. Bertrand
Published in: Open Ceramics, 8, 2021, Page(s) 100170, ISSN 2666-5395
Publisher: Elsevier
DOI: 10.1016/j.oceram.2021.100170

Three-Jet Powder Flow and Laser–Powder Interaction in Laser Melting Deposition: Modelling Versus Experimental Correlations

Author(s): Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Carmen Ristoscu, Diana Chioibasu, Sabin Mihai, Ion N. Mihailescu
Published in: Metals, 10/9, 2020, Page(s) 1113, ISSN 2075-4701
Publisher: MDPI
DOI: 10.3390/met10091113