Development Of Ceramics 3D-Printing, Additive Manufacturing

Rezultaty

Website update 3

Website update 3 wwwDOC3DCerameu

Website update 1

Website update 1 www.DOC-3D-Ceram.eu

Public engagement materials, channels: website, Facebook
Website update 4

Website update 4 wwwDOC3DCerameu

Website Creation

Website Creation www.DOC-3D-Ceram.eu

Website update 2

Website update 2 www.DOC-3D-Ceram.eu

Project Presentation in MS Word and PDF formats
Certification examination online

Progress WP 2 Year 1 report
Standardisation Regulations Progress Review & Evaluation
Progress WP 3 Year 2 report
Progress WP 3 Year 4 and final report
Progress WP 2 Year 2 report
Progress WP 4 Year 3 report
Progress WP 4 Year 1 report
Progress WP 1 Year 2 report
Progress WP 5 Year 3 report
3rd Summer-Schools AND Conference

events analysis reports of 3rd SummerSchools

Progress WP 3 Year 3 report
Progress WP 1 Year 4 and final report
2nd Summer-Schools

events analysis reports of 2nd SummerSchools

Progress WP 4 Year 2 report
Job offers
Progress WP 4 Year 4 and final report
Progress WP 5 Year 1 report
Progress WP 5 Year 4 and final report
1st Summer-Schools

events analysis reports of 1st Summer-Schools

Workshop on ESR Certification and Qualification of Ceramics additive manufacturing AND Conference

events analysis reports of Workshop on ESR Certification and Qualification of Ceramics additive manufacturing AND Conference

Progress WP 5 Year 2 report
Induction school

events analysis reports of Induction school

Progress WP 2 Year 3 report
Progress WP 3 Year 1 report
Final Conference

Final conference

Progress WP 1 Year 3 report
Progress WP1 Year 1 report
Career Development Plans ESRs public analysis
Progress WP 2 Year 4 and final report

Publikacje

Full-Field Mapping and Flow Quantification of Melt Pool Dynamics in Laser Powder Bed Fusion of SS316L

Autorzy: Asif UR REHMAN, F. Pitir, M.U. Salamci
Opublikowane w: Materials, Numer Volume 14, Numer 21, 2021, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma14216264

Grain refinement and mechanical properties for AISI304 stainless steel single-tracks by laser melting deposition: Mathematical modelling versus experimental results

Autorzy: Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Diana Chioibasu, Gianina Popescu-Pelin, Carmen Ristoscu, Ion N. Mihailescu
Opublikowane w: Results in Physics, Numer 22, 2021, Strona(/y) 103880, ISSN 2211-3797
Wydawca: Elsevier
DOI: 10.1016/j.rinp.2021.103880

Laser Powder Bed Fusion (LPBF) of In718 and the Impact of Pre-Heating at 500 and 1000 ◦C: Operando Study

Autorzy: Asif UR REHMAN, F. Pitir, M.U. Salamci
Opublikowane w: Materials, Numer Volume 14, Numer 21, 2021, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma14216683

Densification of surface-modified silicon carbide powder by spark-plasma-sintering

Autorzy: Alejandro Montón; Francis Maury; Geoffroy Chevallier; Claude Estournès; Marc Ferrato; David Grossin
Opublikowane w: Journal of the European Ceramic Society, Numer 41(15), 2021, Strona(/y) 7543-7551, ISSN 0955-2219
Wydawca: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2021.07.036

Tailoring hydroxyapatite microspheres by spray-drying for powder bed fusion feedstock

Autorzy: P. Navarrete-Segado, C. Frances, D. Grossin, M. Tourbin
Opublikowane w: Powder Technology, Numer Volume 398, 2022, ISSN 0032-5910
Wydawca: Elsevier BV
DOI: 10.1016/j.powtec.2022.117116

Tailoring hydroxyapatite suspensions by stirred bead milling

Autorzy: P. Navarrete-Segado, M. Tourbin, D. Grossin, C. Frances
Opublikowane w: Ceramics International, Numer Volume 48, Numer 17, 2022, ISSN 0272-8842
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.ceramint.2022.05.149

Process parameters investigation for direct powder bed selective laser processing of silicon carbide parts

Autorzy: Alejandro Montón Zarazaga; Mohamed Abdelmoula; Gökhan Küçüktürk; Francis Maury; Marc Ferrato; David Grossin
Opublikowane w: Progress in Additive Manufacturing, Numer 8, 2022, ISSN 2363-9520
Wydawca: Springer
DOI: 10.1007/s40964-022-00305-7

Keyhole Formation by Laser Drilling in Laser Powder Bed Fusion of Ti6Al4V Biomedical Alloy: Mesoscopic Computational Fluid Dynamics Simulation versus Mathematical Modelling Using Empirical Validation

Autorzy: Asif Ur Rehman, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu
Opublikowane w: Nanomaterials, Numer 11(12), 2020, Strona(/y) 3284, ISSN 2079-4991
Wydawca: MDPI
DOI: 10.3390/nano11123284

Fabrication of doped β-tricalcium phosphate bioceramics by Direct Ink Writing for bone repair applications

Autorzy: Nicolas Somers; Florian Jean; Marie Lasgorceix; Nicolas Preux; Cathy Delmotte; Laurent Boilet; Fabrice Petit; Anne Leriche
Opublikowane w: Journal of the European Ceramic Society, Numer Volume 43, Numer 2, 2023, ISSN 0955-2219
Wydawca: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.10.018

Spatter Formation and Splashing Induced Defects in Laser-Based Powder Bed Fusion of AlSi10Mg Alloy: A Novel Hydrodynamics Modelling with Empirical Testing

Autorzy: Asif Ur Rehman, Muhammad Arif Mahmood, Peyman Ansari, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu
Opublikowane w: Metals, Numer 11(12), 2021, Strona(/y) 2023, ISSN 2075-4701
Wydawca: MDPI
DOI: 10.3390/met11122023

Thermal Nonlinear Klein–Gordon Equation for Nano-/Micro-Sized Metallic Particle–Attosecond Laser Pulse Interaction

Autorzy: Mihai Oane, Muhammad Arif Mahmood, Andrei C. Popescu, Alexandra Banica, Carmen Ristoscu, Ion N. Mihailescu
Opublikowane w: Materials, Numer 14(4), 2021, Strona(/y) 857, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma14040857

Laser Coatings via State-of-the-Art Additive Manufacturing: A Review

Autorzy: Muhammad Arif Mahmood, Alexandra Banica, Carmen Ristoscu, Ion N. Mihailescu
Opublikowane w: Coatings, Numer 11(3), 2021, Strona(/y) 296, ISSN 2079-6412
Wydawca: MDPI
DOI: 10.3390/coatings11030296

Experimental and numerical study for direct powder bed selective laser processing (sintering/melting) of silicon carbide ceramic

Autorzy: Alejandro Montón, Mohammed Abdelmoula, Gökhan Küçüktürk, Francis Maury, David Grossin, Marc Ferrato
Opublikowane w: Materials Research Express, Numer 8/4, 2021, Strona(/y) 045603, ISSN 2053-1591
Wydawca: IOP Publishing Ltd
DOI: 10.1088/2053-1591/abf6fc

Artificial Neural Network Algorithms for 3D Printing

Autorzy: Muhammad Arif Mahmood, Anita Ioana Visa, Carmen Ristoscu, Ion N. Mihailescu
Opublikowane w: Materials, Numer 14(1), 2021, Strona(/y) 163, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma14010163

Multi-Layer Simulation of the Powder Bed Selective Laser Processing of Alumina for Residual Stress and Distortion Evaluation

Autorzy: GOKHAN KUCUKTURK; Mohamed Abdelmoula
Opublikowane w: Materials; Volume 15; Numer 10; Pages: 3498, Numer 19961944, 2022, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma15103498

Mesoscopic Computational Fluid Dynamics Modelling for the Laser-Melting Deposition of AISI 304 Stainless Steel Single Tracks with Experimental Correlation: A Novel Study

Autorzy: Asif Ur Rehman, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu
Opublikowane w: Metals, Numer 11(10), 2021, Strona(/y) • Asif Ur Rehman, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu, Ion N. Mihailescu, ISSN 2075-4701
Wydawca: MDPI
DOI: 10.3390/met11101569

Powder bed selective laser processing (sintering / melting) of Yttrium Stabilized Zirconia using carbon-based material (TiC) as absorbance enhancer

Autorzy: Giovanni Urruth, Delphine Maury, Christophe Voisin, Vincent Baylac, David Grossin,
Opublikowane w: Journal of the European Ceramic Society, Numer Volume 42, Numer 5, 2022, ISSN 0955-2219
Wydawca: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2021.12.042

Use of X-ray Computed Tomography for Assessing Defects in Ti Grade 5 Parts Produced by Laser Melting Deposition

Autorzy: Diana Chioibasu, Sabin Mihai, Muhammad Arif Mahmood, Mihail Lungu, Ioana Porosnicu, Adrian Sima, Cosmin Dobrea, Ion Tiseanu, Andrei C. Popescu
Opublikowane w: Metals, Numer 10(11), 2021, Strona(/y) 1408, ISSN 2075-4701
Wydawca: MDPI
DOI: 10.3390/met10111408

Binder jetting process with ceramic powders: influence of powder properties and printing parameters

Autorzy: Qirong Chen, Enrique Juste, Marie Lasgorceix, Fabrice Petit, Anne Leriche
Opublikowane w: Open Ceramics, Numer Volume 9, 2022, ISSN 2666-5395
Wydawca: Elsevier Ltd
DOI: 10.1016/j.oceram.2022.100218

Influence of dopants on thermal stability and densification of β-tricalcium phosphate powders

Autorzy: N. Somers, F. Jean, M. Lasgorceix, H. Curto, G. Urruth, A. Thuault, F. Petit, A. Leriche
Opublikowane w: Open Ceramics, 2021, ISSN 0955-2219
Wydawca: Elsevier BV
DOI: 10.1016/j.oceram.2021.100168

Selective Laser Melting of 316L Austenitic Stainless Steel: Detailed Process Understanding Using Multiphysics Simulation and Experimentation

Autorzy: Peyman Ansari; Asif Ur Rehman; Fatih Pitir; Salih Veziroglu; Yogendra Kumar Mishra; Oral Cenk Aktas; Metin U. Salamci
Opublikowane w: Metals, Numer 5, 2021, ISSN 2075-4701
Wydawca: MDPI
DOI: 10.3390/met11071076

Development of calcium phosphate suspensions suitable for the Stereolithography process

Autorzy: C. Goutagny, S. Hocquet, D. Hautcoeur, M. Lasgorceix, N. Somers, A. Leriche
Opublikowane w: Open Ceramics, 2021, ISSN 0955-2219
Wydawca: Elsevier BV
DOI: 10.1016/j.oceram.2021.100167

Estimation of clad geometry and corresponding residual stress distribution in laser melting deposition: analytical modeling and experimental correlations

Autorzy: Muhammad Arif Mahmood, Andrei C. Popescu, Claudiu Liviu Hapenciuc, Carmen Ristoscu, Anita Ioana Visan, Mihai Oane, Ion N. Mihailescu
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 111/1-2, 2020, Strona(/y) 77-91, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-020-06047-6

Bridging the analytical and artificial neural network models for keyhole formation with experimental verification in laser melting deposition: A novel approach

Autorzy: Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Asma Channa, Sabin Mihai, Carmen Ristoscu, Ion N. Mihailescu
Opublikowane w: Results in Physics, Numer 26, 2021, Strona(/y) 104440, ISSN 2211-3797
Wydawca: Elsevier
DOI: 10.1016/j.rinp.2021.104440

Metal Matrix Composites Synthesized by Laser-Melting Deposition: A Review

Autorzy: Muhammad Arif Mahmood, Andrei C. Popescu, Ion N. Mihailescu
Opublikowane w: Materials, Numer 13/11, 2020, Strona(/y) 2593, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma13112593

Non-Fourier Estimate of Electron Temperature in Case of Femtosecond Laser Pulses Interaction with Metals

Autorzy: Anca M. Bucă, Mihai Oane, Muhammad Arif Mahmood, Ion N. Mihăilescu, Andrei C. Popescu, Bogdan A. Sava, Carmen Ristoscu
Opublikowane w: Metals, Numer 10/5, 2020, Strona(/y) 606, ISSN 2075-4701
Wydawca: MDPI
DOI: 10.3390/met10050606

A review of additive manufacturing of ceramics by powder bed selective laser processing (sintering / melting): Calcium phosphate, silicon carbide, zirconia, alumina, and their composites

Autorzy: David Grossin, Alejandro Montón, Pedro Navarrete-Segado, Eren Özmen, Giovanni Urruth, Francis Maury, Delphine Maury, Christine Frances, Mallorie Tourbin, Pascal Lenormand, Ghislaine Bertrand
Opublikowane w: Open Ceramics, Numer 5, 2021, Strona(/y) 100073, ISSN 2666-5395
Wydawca: Elsevier
DOI: 10.1016/j.oceram.2021.100073

Advances in grain itive Manufacturing of Cobalt–Chromium Alloy Multi-Layer Mesoscopic Analytical Modelling with Experimental Correlations: From Micro-Dendrite Grains to Bulk Objects

Autorzy: Muhammad Arif Mahmood, Asif UR REHMAN, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu and Ion N. Mihailescu
Opublikowane w: Nanomaterials, Numer Volume 12, Numer 5, 2022, ISSN 2079-4991
Wydawca: MDPI
DOI: 10.3390/nano12050802

Powder bed selective laser process (sintering/melting) applied to tailored calcium phosphate-based powders

Autorzy: P. Navarrete-Segado; C. Frances; M. Tourbin; C. Tenailleau; B. Duployer; D. Grossin
Opublikowane w: Additive Manufacturing, Numer 50, 2022, Strona(/y) 102542, ISSN 2214-8604
Wydawca: Elsevier BV
DOI: 10.1016/j.addma.2021.102542

Powder Bed Selective Laser Processing of Alumina: Scanning Strategies Investigation

Autorzy: Mohamed Eid Saied Abdelmoula, Gökhan Küçüktürk, Enrique Juste and Fabrice Petit
Opublikowane w: Applied Sciences, Numer 12(2), 2022, Strona(/y) 764, ISSN 2076-3417
Wydawca: MDPI-Multidisipliner Digital Publishing Institute
DOI: 10.3390/app12020764

Post-processing techniques to enhance the metallic parts quality produced by laser additive manufacturing

Autorzy: Mahmood, MA. Chioibasu, D. UR REHMAN, Asif, Mihai, S. Popescu, AC.
Opublikowane w: Metals, Numer Volume 12, Numer 1, 2021, ISSN 2075-4701
Wydawca: MDPI
DOI: 10.3390/met12010077

An Analytical Multiple-Temperature Model for Flash Laser Irradiation on Single-Layer Graphene

Autorzy: Anca M. Bucă, Mihai Oane, Ion N. Mihăilescu, Muhammad Arif Mahmood, Bogdan A. Sava, Carmen Ristoscu
Opublikowane w: Nanomaterials, Numer 10/7, 2020, Strona(/y) 1319, ISSN 2079-4991
Wydawca: MDPI
DOI: 10.3390/nano10071319

Scanning Strategy Investigation for Direct Powder Bed Selective Laser Processing of Silicon Carbide Ceramic

Autorzy: Mohamed Eid Saied Abdelmoula, Alejandro Montón Zarazaga ,Gökhan Küçüktürk, Francis Maury, David Grossin and Marc Ferrato
Opublikowane w: Applied Sciences, Numer 12(2), 2022, Strona(/y) 788, ISSN 2076-3417
Wydawca: MDPI-Multidisipliner Digital Publishing Institute
DOI: 10.3390/app12020788

Lithography-based manufacturing of advanced ceramics for orthopaedic applications: A comparative tribological study

Autorzy: A. Paterlini, A. Stamboulis, V. Turq, R. Laloo, M. Schwentenwein, D. Brouczek, M. Piccinini, G. Bertrand
Opublikowane w: Open Ceramics, Numer 8, 2021, Strona(/y) 100170, ISSN 2666-5395
Wydawca: Elsevier
DOI: 10.1016/j.oceram.2021.100170

Post-infiltration to improve the density of binder jetting ceramic parts

Autorzy: Qirong Chen; Enrique Juste; Marie Lasgorceix; Guillaume Lefebvre; Christophe Tenailleau; Benjamin Duployer; David Grossin; Fabrice Petit; Anne Leriche
Opublikowane w: Journal of the European Ceramic Society, Numer Volume 42, Numer 15, 2022, ISSN 0955-2219
Wydawca: Elsevier BV
DOI: 10.1016/j.jeurceramsoc.2022.08.005

Three-Jet Powder Flow and Laser–Powder Interaction in Laser Melting Deposition: Modelling Versus Experimental Correlations

Autorzy: Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Carmen Ristoscu, Diana Chioibasu, Sabin Mihai, Ion N. Mihailescu
Opublikowane w: Metals, Numer 10/9, 2020, Strona(/y) 1113, ISSN 2075-4701
Wydawca: MDPI
DOI: 10.3390/met10091113

Masked stereolithography of hydroxyapatite bioceramic scaffolds: From powder tailoring to evaluation of 3D printed parts properties

Autorzy: P. Navarrete-Segado, M. Tourbin, C. Frances, D. Grossin
Opublikowane w: Open Ceramics, 2022, ISSN 2666-5395
Wydawca: Elsevier BV
DOI: 10.1016/j.oceram.2022.100235

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz